These FUNGILAB glass capillary viscometers allow to determine viscosities using ASTM and DIN testing methods. All capillary viscometers are supplied with the cali- bration certificate issued in accordance with the conditions of accreditation granted by a National Metrological Register which has…

For both laboratory and field use Aluminum cup and brass orifice Calibrated cups are calibrated to within 2% accuracy Ideal for measuring low viscosity liquids Results are expressed as time in seconds for the liquid to flow through the orifice until the first break in the…

Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil Compact and easy to use Rapid results Inexpensive Boekel cup type viscometers measure viscosity in the 18 to 1725 centistokes range in 90 seconds or less. Five cups are available differing only in the…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105 Precision: ±0.2% Minimum sample volume: 11 mL. Requires liquid bath depth of 250 mm (10”).…

ASTM D-445-446, ASTM D2515, ISO 3104-3105 and UNE 400313 Cannon-Fenske Routine Viscometers quickly and easily measure the viscosities of transparent Newtonian liquids. Sample volume: aprox. 7 ml. Precision: ±0.2%. With constant value indication at +40ºC and +100ºC. All…

Calibrated viscometers For measurement of viscosity of highly viscous materials such as asphalt cement at 140°F Meets ASTM Standard D 2171 Applicable to materials with viscosity range of 0.036 to 80,000 poise. Vacuum of 300 mm Hg is applied to small arm with timing bulbs; two…

Easy-to-use, compact design water bath. Features BM100/110/200/210 Analog set up system Thermometer is included to verify actual temperature Protected water tank prevents burns caused by contact Equipped with a drain (BM200/210) BM401/410 Digital…

BS/U Tube glass capillary viscometers are ideal for measuring the kinematic viscosity of transparent Newtonian fluids within a range of 0.9-10,000 cSt. Includes a calibration certificate with a Constant values at 40°C and 100°C and a precision of ±0.2%. Viscometers conform to ASTM D445, D446, ISO…

The SMART Series is a high-quality rotational viscometer that uniquely adapts to the user's individual testing needs. This unit includes a PT100 temperature sensor, Fungilab's Datalogger software, 10 working memories, and a chemical-resistant touchpad. This instrument provides optimal…

Energy-saving constant temperature water bath standard equipped with overheat prevention device and electric leakage breaker. Performance and functions BS200 4 types of accessorial baskets. Maximum 5L beaker can be set after removing the lid BS400 Comes with 4 container…

Large capacity 37L oil bath with temperature control of up to 200/270°C. Operation and functions High temperature distribution accuracy by adopting jet stirring Advanced supportive functions Standard equipped with external alarm output, temperature output terminal (4~20mA,…

Fungilab's Viscoball is an accurate kinematic viscometer suitable for the testing of transparent Newtonian liquids and gases. The Viscoball provides measurements for low viscosity substances in the food, chemical, cosmetic, pharmaceutical, and petrochemical industries. The improved visibility…

The TOP viscosimeter from serie V, which has a smart and modern design, and a vanguardian technology that offers to the users some uniques and innovative options. The viscosimeter V-Compact, is controlled by a intuitive mobile application from an 8 Tablet. One of the most innovative featurings of…

Yields accurate kinematic viscosity data quickly and easily using the Alphabetical Comparison Method (upward speed of a trapped air bubble) Conforms to ASTM D 1131, D 1545 and D 1725 Standard tubes easily identified by large letters Quick and easy cleaning Viscosity of the liquid sealed in…

Calibrated For measurement of kinematic viscosity of small samples of transparent Newtonian liquids Meets ASTM Standard D 445; specifications conform with ASTM Standard D 446 Viscometer constant is same at all temperatures Initial sample can be diluted to as much as 20 mL for intrinsic…

Calibrated viscometers For measurement of kinematic viscosity of transparent and opaque Newtonian liquids Meets ASTM Standard D 445; specifications conform with ASTM Standard D 446 Also used to measure kinematic viscosity of cut-back asphalts and road oils at 140°F and asphalt…

For glass capillary viscometers and other instruments requiring precise low temperature control All-digital, LCD displayed, microprocessor-controlled temperature regulation; Cooled thermoelectrically (solid state heat pump) Temperature range: -30°C to +30°C °C/°F…

The new ROTAVISC series determines the viscosity of liquids in all areas of application ranging from the laboratory to quality control. The four devices measure in different viscosity ranges. Regardless of a simple or demanding viscosity measurement - the ROTAVISC delivers rapid and accurate…

ASTM D-445-446, ASTM D2515, ISO 3104-3105 and UNE 400313 Cannon-Fenske Opaque Viscometers (reverse flow type) are used for dark Newtonian liquids; especially suitable for liquids so dark in colour that cannot be seen in a Cannon-Fenske routine viscometer. Also used to study shearing stress and…

Contains an oxidation inhibitor which reduces tendency to darken at higher temperatures For use below 135°C (275°F) For higher temperature requirements, see Thomas number 6428R25.

The new ROTAVISC series determines the viscosity of liquids in all areas of application ranging from the laboratory to quality control. The four devices measure in different viscosity ranges. Regardless of a simple or demanding viscosity measurement - the ROTAVISC delivers rapid and accurate…

BS/IP/RF U-Tube Reverse Flow glass capillary viscometers are ideal for the measurement of opaque liquids within a range of 0.6-300,000 cSt. Includes a calibration certificate with Constant values at 40°C and 100°C. Viscometers conform to ASTM D445, D446, ISO 3104, ISO 3105 and UNE 400313 standards.…

Inexpensive, compact source of low-level pressure and vacuum Fused circuit and grounded plug ensure safe operation Multiple fittings kit and polyurethane tubing are provided Oilless diaphragm pump operates quietly to produce a continuous pressure of 35 psi or an adjustable,…

Fungilab's carrying case provides a stable and protective enclosure for all scientific instrumentation.

Fungilab's small sample adapter consists of a cylindrical sample chamber and coaxial spindles, providing accurate small-volume viscosity measurements at precise shear rates. The small sample adapter works specifically with TR spindles for R and H-range viscometers and TL spindles for L-range…

Removes all traces of oil Air pressure drives solvent No electrical contact needed Unit is designed to wash the inside of glass kinematic viscometer tubes with a jet of solvent. At the touch of a button, the solvent stream is cut off and an air jet is directed into the tubes for…

Used in ASTM Method D 1601. A test for Dilute Solution Viscosity of Ethylene Polymers at 130 degree C. It is applicable to a reasonably wide spectrum of ethylene polymers having densities from 0.913 to 0.970g/cc. Available in capillary sizes .6, .7, and .8mm.

Designed specifically for measuring viscosity at low temperatures using glass capillary viscometers Conforms to ASTM D 445 for low temperature viscometry Peltier cell for thermoelectric cooling Fan-cooled, high-density heat sinks Holds two glass capillary viscometers A…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume:10 mL. Requires liquid bath depth of 230 mm (9”). Includes certificate of…

EZ=Equivalent Zahn; 3% Guaranteed tolerance; complies with and exceeds ASTM D 4212 All stainless steel cup and handle Oil used to standardize EZ Cups is produced in accordance with ISO 9002 The EZ cup formula for each cup of the series matches the applicable ASTM formula in D…

The PT100 probe is applicable for rotational viscometers equipped with temperature-sensing capabilities. It is essential for applications requiring testing of varying temperatures.

The Viscolead ADV Series is a budget-friendly, versatile viscometer that expands on the features of the Viscolead ONE. Offering temperature-sensing capability, Fungilab's Datalogger software, and a durable design, the Viscolead ADV is a reliable option for users seeking precise and accurate…