MilliporeSigma Lab Storage Vials
-
-
Vials, screw top, clear glass
MilliporeSigmaVials are suitable basically to inject samples from an autosampler. They are varied in sizes, though 2 mL vials are more commonly used. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Application: Clear glass, screw top…
-
Headspace vial, screw top, rounded bottom
MilliporeSigmaThese vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…
-
Crimp seals with PTFE/silicone septa silver aluminum seal
MilliporeSigmaApplication: Crimp seals with PTFE/silicone septa may be used to seal the water samples during the analysis of BTEX in BTEX contaminated waters, using static headspace extraction, followed by gas chromatography with photoionization detection (HS-GC-PID).
-
Standard screw-thread autosampler vials
MilliporeSigmaConstructed of borosilicate glass. Vials use 8mm septa and screw-caps
-
Assembled screw cap
MilliporeSigmaApplication: Assembled screw cap with hole and PTFE/silicone septum may be used to minimise the risk of explosion of diazomethane, during preparation of diazomethane for gas chromatographic analysis. It was also used to seal off the heat treated samples, during determination of sugar-amino acid…
-
Septa, PTFE/Silicone red PTFE/white silicone
MilliporeSigmaIt is used as an air-tight seal, and prevents contamintion
-
Headspace vial, clear glass
MilliporeSigmaApplication: Headspace vial may be used in storing samples for stability analysis of freeze dried and fluid bed dried alginate microcapsules coated with chitosan containing model probiotic bacteria, Lactobacillus plantarum.
-
These vials provide the advantage of a sealed ampule with the flexibility of a screw cap bottle or a septum vial. These unique, screw-cap sample containers with a 1.2 x 28mm height capillary opening are designed for the storage of volatile samples and reference standards. Advantages: •No…
-
Screw cap (open-top)
MilliporeSigmaPre-assembled 9 mm polypropylene hole-cap, with septum. Legal Information: WHEATON is a registered trademark of Wheaton Industries, Inc.
-
ABC Vial™
MilliporeSigmaThese vials have a 9mm thread that allows them to be used with robotic systems. Use with autosamplers that require 12 x 32 mm screw top or crimp top vials. •40% wider opeing than standard screw cap vials •Superior thread design ensures a secure seal •Compatible with most GC autosamplers that…
-
Certified Vial Kit, Low Adsorption (LA)
MilliporeSigmaLegal Information: MRQ30 CD Vial is a trademark of QIS, Inc.
-
Vials, screw top
MilliporeSigmaApplication: Vials may be used in headspace solid-phase microextraction (SPME) followed by GC-FID for simultaneous analysis of furan, 2-methylfuran and 2-pentylfuran from juice samples.
-
Snap Ring polypropylene autosampler microvial
MilliporeSigmaSynonyms: Snap Ring Vial, 100muL, polypropylene, 100 pk Application: Autoclavable, easy to maintain. A vial is used to store or as a closure type.
-
Screw cap (open-top)
MilliporeSigmaThese hole caps do not come with septa. Application: It may be used in HPLC analysis, for quantifying adsorption of the three cationic membrane-active peptides mastoparan X, melittin, and magainin 2.
-
Vials, screw top
MilliporeSigmaVials (volume 22 mL, clear glass vial, thread 20-400) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.
-
ABC Vial™
MilliporeSigmaABC Vials have a unique 9 mm thread design that allows screwing on the caps, and still using them in a robotic autosampler. This thread is much higher on the top of the vial allowing space between the bottom of the thread and the shoulder of the vial. Legal Information: ABC Vial is a trademark…
-
Certified glass inserts
MilliporeSigmaOther Notes: Large opening inserts fits crimp seal, snap ring, and 9 mm threaded vials (with 6.0 mm ID)
-
Septa, tan PTFE/silicone
MilliporeSigmaApplication: Septa, tan PTFE/silicone may be used in headspace solid-phase microextraction (SPME) (lyophilized aqueous extract).
-
Vials, screw top, silane-treated
MilliporeSigmaCap not included. Application: It has been used to collect pheromone samples from adult male beetle Neoclytus mucronatus mucronatus, for analysis under GC-MS.
-
Headspace vial, clear glass, beveled top
MilliporeSigmaLegal Information: PerkinElmer is a registered trademark of PerkinElmer Inc.
-
Certified screw thread vials
MilliporeSigmaOther Notes: The inside diameter of vials vary with the manufacture. The following insert part numbers are compatible with these large opening vials. •29435-U PK100, Certified 200 muL glass inserts, mandrel precision point, 6 X 29mm, with bottom spring •29436-U PK100, Certified 250 muL glass…
-
Vial crimp seals, BiMetal (magnetic)
MilliporeSigmaThe BiMetal caps are made of both tin and aluminum and are easier to crimp than tin 20mm seals. The sealing surface is aluminum and the inner diameter is made of tin to add the magnetic surface. These caps are available in a variety of colors. Other Notes: We recommend using the plier-type…
-
MSQ(TM) Caps with Septa
MilliporeSigmaWe recommend using LA Vials with the MSQ polypropylene cap with PTFE/silicone septa. This cap and septa combination was purposely designed for use with mass spectrometry. It shows little to no background contamination when compared to other cap and septa products in the marketplace. Legal…
-
Certified Vial Kit, Low Adsorption (LA)
MilliporeSigmaLegal Information: CD is a trademark of QIS, Inc.
-
Amber storage bottles
MilliporeSigmaStorage bottles are generally used to store stock solutions and other chemicals. Amber bottles are used to avoid oxidative changes in photosensitive chemicals. Synonyms: SCREW-CAP AMBER SEPTUM BOTTLE 240ML PK12
-
Vials, screw top
MilliporeSigmaApplication: Glass screw top vials (40 ml) sealed with phenolic open-top caps and PTFE/silicone septa may be used to contain pectin or plant material, during d2H analysis of plant methoxyl groups, in an experimental study to analyse stable hydrogen-isotope of methyl chloride, which is emitted from…
-
Snap Ring vial
MilliporeSigmaVIALS TAKING 11mm SNAP TOP SEALSLARGE OPENING, 12 x 32mmUse with:Agilent / HP 7673 series I/II,7670A, 7671A, 1042, 1090,8042, 1050, 1082, 1080, 1084AIM CPS-200A.I. (42 vial tray)Alcott 738AltexAMS 42Antek 736ASCBeckman 501, 507Carlo Erba AS V42, AS 105Carnegie CMA 230/200ChrompackDani 39.80, ALS…
-
Septa, tan PTFE/silicone
MilliporeSigmaApplication: Septa, tan PTFE/silicone has been used to seal the reactivial containing the by-product sample of snow crab, which is subjected to alkaline liquid phase hydrolysis. Legal Information: Tenax is a registered trademark of Buchem B.V.
-
-
Assembled screw cap
MilliporeSigmaApplication: Assembled screw cap may be used to store fresh plant material for collecting volatiles using solid phase microextraction (SPME) technique. It may also be used in liquid chromatography-tandem mass spectrometry (LC-MS/MS) method performed for determining bisphenol A, 4-t-octylphenol and…
-
Closures for Snap Ring vials
MilliporeSigmaPTFE/silicone (with starburst), polypropylene seal Snap Ring cap eliminates the need for crimping. Closures provide an airtight seal and are ideal for use with volatile liquids.