Vials

Compare Tool

Select up to 3 products

1 - 32 of 130
Sort
View
Show
  • Mass Spec Vial Test Parameters include: Glass – Type 1, Class A, 33 Expansion Clear or Amber Borosilicate Dimension – Height, Diameter, Bottom Thickness, Neck Length, Thread Profile, Annealing Cap/Septum – Diameter, Height, Thread Integrity, Center Flash, Septa Insertion GC/MS…

  • TOC Certified Vials

    J.G. Finneran

    EPA Certified TOC Vials

  • Push point insert tip design allows sample access down to 10µL Glass vials provide an inert solvent resistant environment for samples Assembled plate has excellent thermal stability and chemical resistance 700µL inserts assembled in the square well plate can be sealed with a…

  • Available in clear or amber borosilicate glass. Assembled with the solid top PTFE-Lined closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing treatment.…

  • Dram Sample Vials

    J.G. Finneran

    The dram/sample vials are available in clear or amber Type I borosilicate glass assembled with solid top or open hole black polypropylene screw thread closures. The solid top closures are lined with PTFE/F217 material and the open hole closures have PTFE faced silicone septa assembled in the…

  • Available in clear or amber borosilicate glass. Choice of .125" or .100" PTFE/Silicone Septa. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing…

  • Dram Vials

    J.G. Finneran

    Clear and amber dram sample vials are made of Type I borosilicate glass, providing excellent resistance to heat shock and chemical leaching. Finneran dram vials are available assembled with screw thread closures PTFE/F217 lined or PTFE/Silicone lined.

  • Available in clear or amber borosilicate glass. Choice of .125" or .100" PTFE/Silicone Septa. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing…

  • 11mm Snap Top Caps™

    J.G. Finneran

    Use with Snap Ring™ or Snap Seal™ vials Snap on and off easily No sharp aluminum edges 2686S94 through 2686T10 are Polypropylene GC Snap Top Caps. 2686T21 through T42 Snap Top Caps are for Shimadzu Autosamplers. All caps are 11 mm. Caps may be snapped on and off…

  • Conical Inserts

    J.G. Finneran

    Due to the conical design of the snap plug, limited volume inserts used in the shell vial stay centered and straight allowing for easy sample evacuation. Finneran black polypropylene inserts protects light sensitive samples from having a chemical reaction during sampling testing and storage.…

  • Standard Aluminum Seals

    J.G. Finneran

    For use with 12 x 32 mm crimp top vials Septa included Larger opening Variety of colors Increased target area for needles helps prevent breakage. Allows color coding for easy sample identification. Our 11mm aluminum seals and snap caps are available assembled with a…

  • Type I borosilicate glass Clear or amber Accept a variety of seals The Snap Seal™ Vial can be securely sealed with the Poly Crimp™ Seal, an aluminum crimp seal or a variety of Snap Top Cap™ designs.  The unique design provides for a secure seal with any…

  • Designed to work in Agilent (HP) and other autosamplers. Neck finish allows use of standard aluminum seals or Poly Crimp™ Seals. Choose from clear or amber Type I borosilicate glass. Available with graduated marking spots which can be written on with a #2 pencil. 2.0 mL volume, 11 mm seal, 12…

  • Available in clear or amber borosilicate glass. Assembled with the solid top PTFE-Lined closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing treatment.…

  • J.G. Finneran Associates designed Limited Volume Inserts with and without Bottom Springs to ensure that autosamplers extract even the smallest sample volumes every time, without damaging injection needles or breaking sample containers. The inserts preassembled with polymer bottom springs act…

  • Headspace vials and closures must form a tight seal for accurate analysis with reproducible results. Available in clear or amber Type I borosilicate glass with crimp or screw thread finishes. The vials are used to heat the sample until the concentration of the liquid and gas phases are in…

  • Available in clear or amber borosilicate glass. Assembled with the solid top PTFE-Lined closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing treatment.…

  • For use with all 12 x 32 mm crimp top vials No more cuts from sharp metal edges Eliminates breakage during crimping or decapping Plastic cap can be crimped using a crimping tool or attached by hand permitting an airtight seal by either method. The Poly Crimp seal aligns itself on the…

  • Available in polypropylene or polymethylpentene (TPX) Finneran black polypropylene vials protects light sensitive samples from having a chemical reaction during sampling, testing, storage or transporting. The polypropylene elimates vial breakage. Specify black PP when amber just isn't dark enough.

  • Large opening R.A.M.™ vials 40% larger opening Type I Borosilicate glass Clear or amber These vials function similarly to the Kimble ROBO Vial™, National’s Target DP, Sun 1 and Wheaton ABC Vials. Specifically designed to work in robotic arm autosamplers like…

  • Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.

  • Available in a wide assortment of colors. Designed for use with Waters, Shimadzu, Spectra-Physics, Varian and other autosamplers. The Top Seal™ closure with a 0.010" molded septa allows for easy needle penetration and is inert to most solvents. The one piece design saves time by…

  • Designed to work in most standard autosamplers. Finneran polypropylene vials are lightweight, economical and have good chemical resistance. These limited volume vials provides maximum retrieval of contents. 12x32mm, 8-425mm Thread Choice of materials: Polypropylene is translucent,…

  • Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.

  • 1.5mL Glass Vials

    J.G. Finneran

    Vial loader is fast and convenient for loading vials into the base plate. To use the Vial Loader: First, peel away the packaging and place an empty Base Plate on top of the vial loader Second, invert the entire unit and the plate is ready to use

  • The new Finneran SPME Vials with a thicker lip are ideal for most SPME applications. The thicker lip vial creates a tighter seal on the vial. The Finneran SPME vials are manufactured from high quality Type I borosilicate glass. This new thicker lip vial is available in 10mL and 20mL capacities. To…

  • Easy to use No tools required Twist of the cap produces an evaporation-proof seal. Larger opening provides increased target area for needle penetration. Available in a variety of colors for easy sample identification. Choose a septa best suited for your application. For customers…

  • Interlocked tm Vial is composed of a glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert.

  • 12 x 32mm Vial with a 40% larger opening Available in Polypropylene, Clear Polypropylene and TPX Ideal for ion Chromatography, capillary electrophoresis, atomic absorption, pH sensitive samples, sodium and heavy metals analyses and aqueous samples Specifically designed to work in robotic…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.