In Lab File® Carton Of “200” borosilicate glass, with marking area and size 13-425 screw cap; cap has butadiene-styrene rubber liner Capacity: 4 mL ; height x diameter: 48 x 15 mm In Wheaton Lab File carton containing two pull-out drawers.

2 mL size Small size reduces sample to surface contact Made from Wheaton 33 low extractable borosilicate glass Attached polypropylene screw cap with metal foil liner

For use with WHEATON crimp top headspace vials Seals are made from aluminum for easy crimping and decapping Seals are magnetic for use with magnetic transport autosamplers

Wheaton headspace vials accept 20 mm aluminum seals Rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures Manufactured from Type I borosilicate glass Top provides a tighter seal with your septa O.D. x Height: 22 x 38 mm Capacity: 6 mL

Borosilicate glass vial with 300 µL glass limited volume insert Limited Volume Insert is fused to vial which prevents needle damage Writing patch on all vials

Capacity 6 mL (9718J07) Linerless polypropylene cap, size 18 Total height: 54 mm; o.d.: 17 mm These vials are economical when used as scintillation vials. Caps and vials are bulk-packed in separate plastic bags. Capacity 20 mL (9718J15, J20) Precapped Vials are of higher density…

Scintillation vials are 20mL made from Wheaton 180 low potassium borosilicate glass Available with caps attached, caps packaged separately or without caps Packaged in corrugated trays of 100 Glass Vials are manufactured from Wheaton 180 low potassium borosilicate glass that conforms…

Manufactured from Type I borosilicate glass Screw thread finish eliminates the need for crimping tools Accept 18mm screw thread closures with septa For use with CTC Analytics Systems requiring magnetic closures Also compatible with modern Agilent, Perkin Elmer and Tekmar autosamplers that…

The Organic series consists of clear and amber glass vials with solid or open top closures.  The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone septa assembled in the cap. The cap material is black…

Converted from Type I borosilicate glass tubing, vials conform to the hydrolytic resistance requirements outlined in USP <660> and EP 3.2.1 Conforms to 8362-1 requirements Shrink-wrapped modules reduce particulate contamination Special design adds strength for freeze-drying…

Heavy wall construction designed for lyophilization and freeze-drying. Manufactured from Wheaton 33 low extractable clear borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Vacule vials have controlled ID, for accurate stopper fit. Designed for…

Manufactured from Type I borosilicate glass Flat bottom vials are designed for use with older Agilent Headspace Autosamplers Beveled finish forms a tight seal with crimp headspace seals Compatible with WHEATON 20mm crimp headspace seals

The Pliers Decappers are an inexpensive and easy way to remove aluminum seals. This tool is manufactured from steel with red plastic-coated handles. To remove a seal, simply secure the seal between the jaws, squeeze the handles and twist.

Choice of borosilicate glass or polypropylene Snap plug closure available in natural polypropylene Purchase vials and caps separately or together in convenience packs Polyethylene snap plug caps feature a starburst top for easier needle penetration

Clear, non-graduated glass vials with open top black phenolic caps Teflon® faced silicone liner Screw cap attached Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass …

In Lab File® Carton Of “300” borosilicate glass With attached “Biogrip” screw caps with butadiene-styrene rubber liners Packaged in Wheaton Lab File carton containing two pull-out cardboard drawers.

Can be used in Waters WISP™ 96-position autosampler Choice of borosilicate glass or polypropylene Snap plug closures available in 5 colors Purchase vials and caps separately or together in convenience packs Polyethylene snap plug caps feature a starburst top for easier needle penetration

Provide positive seal Easy removal Large target area Snap caps for use with autosampler vials are designed to provide a positive seal yet are easy to remove with resorting to crimping or decapping tools. These vials are suitable for high volume, quick turnaround sampling and…

Vials with caps attached packaged in partitioned trays Made from borosilicate glass Case of 72

Screw caps Autoclavable Rubber lined caps Amber sample vials have solid top black phenolic caps that are Teflon® faced with 14B rubber liners. Cap material is black phenolic and cap and liners are autoclavable. With these vials, Teflon® and Type 1 glass are the only surfaces that will make…

Clear and amber vials made from borosilicate glass Shorty Vials® feature a low profile for greater stability Screw caps available separately

1.8 mL capacity 12 x 32 mm Screw thread With or without patch Color coded PP caps The ABC Vial™ Convenience Packs include 1.8 mL vials packaged in a recyclable PETE plastic clamshell to help prevent particulate contamination; caps are also included. Vials and…

Feature convenient snap ring/crimp top 12 x 32 mm vial 1.8 mL capacity Type 1 borosilicate glass The E-Z Vial with snap ring/crimp top features a plastic snap closure that eliminates the need for crimping and decapping tools. Vial has an opening that is 40% larger than…

1.8 mL capacity 12 x 32 mm Screw thread With or without patch Color coded PP caps The ABC Vial™ Convenience Packs include 1.8 mL vials packaged in a recyclable PETE plastic clamshell to help prevent particulate contamination; caps are also included. Vials and ABC Screw…

Borosilicate glass vial with 300uL glass limited volume insert Insert is fused to vial to prevent needle damage Writing patch on all vials Purchase vials and caps separately or together in convenience packs Use with WHEATON ABC Screw Caps

Clear Vial with solid-top black phenolic 14B rubber-lined caps attached The aqueous series consists of clear and amber glass vials with solid-top closures. Featured is the black phenolic cap with a 14B white rubber liner. Both cap and liner are autoclavable and have substantial resistance to…

These 20 mL vials are manufactured from high density polyethylene. Vials with caps attached are packaged in individual cells in trays of 100. Vials with screw caps packed separately are packaged in polyethylene bags of 100 and placed in a separate tray. Cases of 1000 vials are packed in a single…

Mouth OD 28.5mm Use with WHEATON tamper evident safety cap Large labeling surface for easy product identification Manufactured from WHEATON 900 soda-lime amber glass that conforms to USP Type III requirements Use the 0913V96 Crimper to secure the tamper-evident safety caps (1220Q54 or…