Butyl Rubber Stoppers create a gas-tight seal for improved stability.

Always have enough vials and closures readily available for your analysis. These convenience kits hold 100 2 mL Clear Screw Top Vials and 100 preassembled Blue Caps with PTFE/Red Rubber Septa together in an environmentally clean, re-sealable clamshell pack. Guaranteed for fit and compatibility, our…

PerkinElmer closures are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments.

Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements.   The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions.   All our vials are packed in a clean environment to ensure…

All our vials are packed in a clean environment to ensure you receive contaminant free product every time. Volume: 2 mL Size: 12 x 32 mm I.D.: 11 mm Finish: Crimp Top Description: Amber glass

The PerkinElmer injection port septa is useful for enclosing sample vials in temperatures up to 210 degree C. This septa is also useful for the storage and injection applications.

20 mm Crimp Top with PTFE/Silicone Septa - Ultra Bleed Pressure Release (1000/pack)

Guaranteed for fit and compatibility, our convenience kits are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Volume: 2 mL Size: 12 x 32 mm I. D. : 9 mm Finish: Screw Top Cap with Closure Kit Description: Clear glass vial PTFE/Silicone Pre-slit septa with…

Vial inserts can be used with any of our 9, 10 or 11 mm vials for applications where you have a limited amount of sample.

Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you…

20 mL PTFE/Silicone Convenience Kit: Package: 100

Choose the right septa for your analysis. Although a wide variety of septa is available, chemical compatibility and temperature are the most critical to the analysis. Temperature applies not only to the vial, but also to the temperature of the instrument’s needle used for pressurization and sample…

The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. In addition, all our vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Combine our vials with…

Keep your samples organized and tip proof! These rugged, plastic vial racks are great for holding vials while you load and cap your samples. They stack away neatly when done.

Cap/Septa - 20MM PTFE/Red Rubber (100)

Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you…

Headspace Silicone Convenience Kit contains everything you need to run Gas Chromatography. Each product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be certified for higher purity grades. All our caps and septa are packed in a…

Each product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be certified for higher purity grades. All our caps and septa are packed in a clean environment to ensure you receive contaminant free product every time. PerkinElmer…

PerkinElmer closures are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. I.D.: 10 mm Finish: Screw Top Cap with Septa Description: PTFE/Silicone Pre-slit Septa with Black Cap *Must be purchased with…

The PerkinElmer replacement spring makes use of two springs for installation and is used in gas chromatography technology.

PerkinElmer closures are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. I. D. : 11 mm Finish: Crimp Top Cap with Septa Description: PTFE/Red Rubber Septa with Aluminum Cap (green)

Always have enough vials and closures readily available for your analysis. These convenience kits hold 100 2 mL Clear Crimp Top Vials and 100 preassembled Aluminum Caps with PTFE/Red Rubber Septa together in an environmentally clean, re-sealable clamshell pack.Guaranteed for fit and compatibility,…

PerkinElmer closures are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Volume: 2 mL Size: 12 x 32 mm I.D.: 11 mm Finish: Snap Top Description: Amber glass

For sealing sample vials for temperatures up to 210 °C. Lowbackground peaks, very low permeability, not recommended forrepetitive injections from the same vial. Includes aluminum capsand star springs. Note: Due to the patent which PerkinElmer holds on the closures system of the Headspace vials, the…

Note: Due to the patent which PerkinElmer holdson the closures system of the Headspace vials, the caps, septa, andstar springs cannot be sold separately.(includes patented pressure-relief crimp cap and star springs)

We offer Headspace Crimp Top Vials with graduation or the PerkinElmer logo in various volumes.

For sealing sample vials for temperatures up to 210 °C. Low background peaks, very low permeability, not recommended for repetitive injections from the same vial. Includes aluminum caps and star springs. Preassembled. Note: Due to the patent which PerkinElmer holds on the closures system of the…

0 to 60 for sample position for measurement in transmission of filter glasses and other transparent samples. Minimum sample size is 30 x 40 mm.

PerkinElmer vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments.Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at…

2 mL, 11 mm Snap Top Vial with PTFE/Silicone Closure- Kit

Seal ASSY-HS40 Needle 1 PC

These autosampler vials with fused inserts offers easy sampling for micro volumes.