PerkinElmer Chromatography Vials
-
-
18 mm PTFE/Butyl Assembled Cap and Septa,
PerkinElmerUsing only the PerkinElmer lot-tested, certified, approved septa, gives the analyst the same excellent analytical results that the TurboMatrixHeadspace Crimp Vials have always provided.
-
2 mL, 11 mm Crimp Top Vial
PerkinElmerOur vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you…
-
20 mm PTFE/Butyl Septa/Cap/Springs
PerkinElmerChoose the right septa for your analysis. Although a wide variety of septa is available, chemical compatibility and temperature are the most critical to the analysis. Temperature applies not only to the vial, but also to the temperature of the instrument’s needle used for pressurization and sample…
-
Vial inserts can be used with any of our 9, 10 or 11 mm vials for applications where you have a limited amount of sample.
-
Headspace Silicone Convenience Kit contains everything you need to run Gas Chromatography. Each product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be certified for higher purity grades. All our caps and septa are packed in a…
-
Note: Due to the patent which PerkinElmer holds on the closures system of the Headspace vials, the caps, septa, and star springs cannot be sold separately. (includes patented pressure-relief crimp cap and star springs)
-
Always have enough vials and closures readily available for your analysis. These convenience kits hold 100 2 mL Clear Crimp Top Vials and 100 preassembled Aluminum Caps with PTFE/Red Rubber Septa together in an environmentally clean, re-sealable clamshell pack.Guaranteed for fit and compatibility,…
-
Replacement Spring
PerkinElmerThe PerkinElmer replacement spring makes use of two springs for installation and is used in gas chromatography technology.
-
0 to 60 for sample position for measurement in transmission of filter glasses and other transparent samples. Minimum sample size is 30 x 40 mm.
-
These autosampler vials with fused inserts offers easy sampling for micro volumes.
-
2 mL, 9 mm Clear Glass Screw Top Vial
PerkinElmerPerkinElmer vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at…
-
-
Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you…
-
18 mm Red PTFE/White Silicone metal Screw Cap/Septa 1.3 mm thickness 8 mm hor; Package: 100
-
All our caps and septa are packed in a clean environment to ensure you receive contaminant free product every time. PerkinElmer closures are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. I. D. : 11 mm Finish: Crimp Top…
-
vIT-2ML 9MM SCR AMB PTFE/SIL BLUE 100
PerkinElmerAlways have enough vials and closures readily available for your analysis. Guaranteed for fit and compatibility, our convenience kits are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Volume: 2 mL Size: 12 x 32 mm I.D.: 9 mm Finish: Screw Top Cap with Closure…
-
20 mm Hand Crimper
PerkinElmerFor use on GC Headspace Vials or LC Large Volume Vials. Crimp capping is still a preferred method by some laboratories to ensure sample integrity, particularly those containing volatile compounds.
-
Butyl Rubber Stoppers create a gas-tight seal for improved stability.
-
2 mL, 11 mm Crimp Top Amber Vial
PerkinElmerAll our vials are packed in a clean environment to ensure you receive contaminant free product every time. Volume: 2 mL Size: 12 x 32 mm I.D.: 11 mm Finish: Crimp Top Description: Amber glass
-
vial Diffuser
PerkinElmerThe conical shape of the PerkinElmer diffusers allow the needle to penetrate into solvent or waste. Reduces spillage and large losses through evaporation.
-
PTFE Autosampler Vial Sleeve
PerkinElmerSleeve 12 x 32mm Open Base Clear Glass Support Sleeve; used to offer microsampling capability in a standard 2mL vial carousel or robotic autosampler. Sleeve will only accept 200µL and 300µL vials
-
Our quality vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. In addition, all our vials are manufactured to…
-
Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you…
-
-
Our quality vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. In addition, all our vials are manufactured to…
-
Vial inserts can be used with any of our 9, 10 or 11 mm vials for applications where you have a limited amount of sample.
-
For sealing sample vials for temperatures up to 210 °C. Lowbackground peaks, very low permeability, not recommended forrepetitive injections from the same vial. Includes aluminum capsand star springs. Note: Due to the patent which PerkinElmer holds on the closures system of the Headspace vials, the…
-
Headspace CTC Vial
PerkinElmerThe PerkinElmer headspace CTC vial with an inside diameter of 20 mm offers a volume capacity of 20 mL and is made from solid glass. Screw-style top of the vial makes it smooth for installation.
-
Injection Port Septa
PerkinElmerThe PerkinElmer injection port septa with 3 mm thickness is made from solid silicone and the PTFE coating avoids corrosion. This septa is compatible to use with 20 mm headspace vials.
-
22 mL Crimp Top Vial with P logo
PerkinElmerOur vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you…
-
Injection Port Septa
PerkinElmerThe PerkinElmer injection port septa is useful for enclosing sample vials in temperatures up to 210 degree C. This septa is also useful for the storage and injection applications.