Application: Short thread autosampler vial may be used for simultaneously eluting and derivatizing nonylphenol polyethoxy carboxylates (NPECs) to their respective methyl esters, in subcritical (hot) water/ethanol extraction of NPECs from industrial and municipal sludges. Other Notes: The…

Headspace vial, beveled top, rounded bottom is a clear glass vial, which can be used with CTC autosampler (Combi PAL).

Vials are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top vials (volume 7 mL, clear glass vial, O.D. x H 17 mm x 60 mm, thread 15-425) are used on many…

Insert fits 12 x 32 mm vials with large opening (6.0 mm)

Micro volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. Vial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts should be chosen based on the inner diameter of the vial neck. …

These vials provide the advantage of a sealed ampule with the flexibility of a screw cap bottle or a septum vial. These unique, screw-cap sample containers with a 1.2 x 28mm height capillary opening are designed for the storage of volatile samples and reference standards.       Advantages: •No…

Crimp seals, 11 mm, with PTFE/rubber septa are for use with 20 mm crimp top vials. The PTFE/rubber septa are compatible with most organic solvents many organic solvents: acetic acid (

The new Interlock Vial/Insert limited volume vial is a 300 muL flange top glass insert permanently fused into 12 x 32 mm glass vials. This product provides the user with the convenience and performance of a one piece microvial at a fraction of the cost. •The flange top centers the inserts into the…

Application: Screw cap may be used for capping water samples in amber glass vial comprising of a polytetrafluoroethylene silicon septum for the analysis of chlorinated volatile organic compounds in water samples using headspace-solid-phase microextraction with gas chromatography (HS-SPME-GC).

Vial inserts basically permit the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.

We recommend using LA Vials with the MSQ polypropylene cap with PTFE/silicone septa. This cap and septa combination was purposely designed for use with mass spectrometry. It shows little to no background contamination when compared to other cap and septa products in the marketplace. Legal…

Green Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…

Pre-assembled 9 mm polypropylene hole-cap, with septum.

•Thinner liner for easier penetration •Special PTFE/silicone liner with only 0.05mm PTFE film (easier penetration that thicker PTFE) •These products should be used with the SPME vial that has a thicker lip Other Notes: Recommended for: CTC Combi-PAL.

Green Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…

Vial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.

Use with:Waters 96-Position Autosampler Application: Assembled screw cap with hole and PTFE/silicone septum was used with screw top vials, to contain plant tissue in an experimental study done in order to identify major volatiles emanating from chestnut reproductive plant tissue. It may also be…

Vials (volume 2 mL, amber glass vial, thread 8-425) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Amber glass protects sensitive samples from exposure to UV…

Cap not included.

Amber storage bottles (volume 120 mL, O.D. x H 49 mm x 114 mm, thread 22-400, bottle only) are primarily used to protect the stored sample from sunlight. Oxidation of various oils is prevented when packaged in amber glass bottles. Synonyms: AMBER SCREW-CAP BOTTLE ONLY 120ML PK12

The QSertVial(TM) is the ultimate microsampling device. It contains a 300 muL glass insert that is fused to the vial to form one precise integral unit. The rim of the insert is positioned slightly above the top of the vial so the septum can make a secure seal with the closure, eliminating…

Application: It may be used to cut and store fresh plant material for collecting volatiles in solid phase microextraction (SPME) technique. It may also be used in liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for determining bisphenol A, 4-t-octylphenol and 4-nonylphenol in…

This product is designed to work in the Waters WISP(TM) 96 Position Autosampler. Limited volume shell vials have a precisely designed conical bottom which permits maximum sample evacuation.Vials for waters® 96-position carousel, 8 x 40 mm is used for different life science applications. …

Headspace vials are available in several sizes. The style and diameter of headspace vials depend on the autosampler. Vials with rounded bottoms are sturdier and more resistant to pressure than the flat bottom vial. The rounded bottom version was created to allow the vial, when transported by a…

Vials, clear glass (1.5mL) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.

Legal Information: Snap Seal is a trademark of J.G. Finneran Associates, Inc.

Certified polypropylene bonded caps with septa, pkg of 100 are manufactured using virgin resins to eliminate the possibility of sample contamination. Caps are molded to ensure consistency in fit, thread specification and overall dimensions. The PTFE/silicone septa are manufactured, conditioned and…

VIALS TAKING 11mm SNAP TOP SEALSLARGE OPENING, 12 x 32mmUse with:Agilent / HP 7673 series I/II,7670A, 7671A, 1042, 1090,8042, 1050, 1082, 1080, 1084AIM CPS-200A.I. (42 vial tray)Alcott 738AltexAMS 42Antek 736ASCBeckman 501, 507Carlo Erba AS V42, AS 105Carnegie CMA 230/200ChrompackDani 39.80, ALS…

It is autoclavable, easy sterilization, is used as a closure type for the containers used to contain substances in order to prevent contamination. Synonyms: Crimp seals with PTFE/silicone septa

Application: Septa may be used in headspace solid-phase microextraction (SPME) (lyophilized aqueous extract).

Other Notes: Large opening inserts fits crimp seal, snap ring, and 9 mm threaded vials (with 6.0 mm ID)

Other Notes: The inside diameter of vials vary with the manufacture. The following insert part numbers are compatible with these large opening vials. •29435-U PK100, Certified 200 muL glass inserts, mandrel precision point, 6 X 29mm, with bottom spring •29436-U PK100, Certified 250 muL glass…