Chromatography Vials

Compare Tool

Select up to 3 products

HomeAll Products

Vials Chromatography Vials

1 - 32 of 436

Brooks Life Sciences

  • Specialty Autosampler Vials And Accessories

    J.G. Finneran

    6 x 32 mm Crimp Top Vial, 8 mm Seal Used with Beckman 501, 502 and 507; Dynatech 60 Vial Tray; Gilson 231 XL and 232 XL; Hitachi AS-4000; LDC 713; L.E.A.P. Technologies CTC A200S; and Waters Alliance 2690 Autosamplers Used with A.I. CTC A200S; Beckman 504; Carlo Erba/Fisons AS200 Tray;…

  • Seals Aluminum 20mm TFE / Butyl RBR

    Thermo Scientific Sun SRi

    Preassembled closures minimize contamination during sample preparation

  • Screw neck vials (EPA), N 24


    20 mL, 30 mL, 40 mL and 60 mL vials in clear and amber glass of 1st hydrol. class glass Bonded Silicone/PTFE closures, thread design 24-414, open/closed top, most frequently used in combination with the 40 mL vial Vial container available for 20 mL, 30 mL and 40 mL vials. Vials are packed…

  • Limited Volume Inserts

    labForce (a Thomas Scientific Brand)

    labForce Brand Limited Volume Inserts are ideal for sampling small volumes using a labForce 12x32mm vial for support. Inserts are pre-assembled with a polyethylene spring which aids in alignment. Manufactured from Type I borosilicate glass Conical design permits complete sample removal …

  • Headspace Vials

    Agilent Technologies

    Beveled top for maximum secure seal Two neck lengths are available Flat or rounded bottom designs Beveled neck vials are available in both 10 mL and 20 mL capacities, flat or rounded bottom. The 20 mm crimp caps provide a consistently secure seal. Flat-bottom headspace crimp top glass vials…

  • Interlocked™ Limited Volume Standard Opening Vial

    J.G. Finneran

    Interlocked tm Vial is composed of a glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert.

  • 2 mL, 9 mm, Screw Top Vial with PTFE/Silicone Pre-slit Closure-Kit


    Always have enough vials and closures readily available for your analysis. These convenience kits hold 100 2 mL Clear Screw Top Vials and 100 preassembled Blue Caps with PTFE/Red Rubber Septa together in an environmentally clean, re-sealable clamshell pack. Guaranteed for fit and compatibility, our…

  • Headspace Vials

    National Scientific

    Fits most autosamplers Crimp seal finish Flat or rounded bottoms Beveled edge Type 1 borosilicate glass Clear glass vials with 20mm crimp seal finish are designed to fit most headspace autosamplers Flat bottom vials maximize heating efficiency when used with bottom Round…

  • Polypropylene Limited Volume Vials

    J.G. Finneran

    Black polypropylene vials protects against light sensitive samples from having a chemical reaction during sampling, testing, storage or transporting. The polypropylene provides added safety by eliminating breakage.

  • Manual Hand Crimper and De-Crimpers

    DWK Life Sciences (Kimble)

    Manual hand crimper/de-crimpers for 11, 13, or 20mm aluminum seals and vials. Perfect for chromatography and general crimping needs.

  • Clear R.A.M.™ Vial with Ribbed Screw Thread Cap

    J.G. Finneran

    Large opening R.A.M.™ vials 40% larger opening Type I Borosilicate glass Clear or amber These vials function similarly to the Kimble ROBO Vial™, National’s Target DP, Sun 1 and Wheaton ABC Vials. Specifically designed to work in robotic arm autosamplers like…

  • 6 mL Screw Top Vials, Caps and Septa for 1100/1200 Series Autosamplers

    Agilent Technologies

    Agilent minivials are designed to allow for reproducible injections of minute quantities, making your limited sample applications more effective and more accurate. Our microvials provide limited volumes for microsampling and the 6 mL capacity vial allows for larger sample injections.

  • Cap and Butyl Rubber Stopper Septa for Headspace Vials


    Butyl Rubber Stoppers create a gas-tight seal for improved stability.

  • Clear Septa Vials


    Clear borosilicate glass with a 0.125” septa Borosilicate glass vials come with a standard 0.125 in. thick, I-CHEM blue, PTFE/silicone septa in an open-top 24-414 polypropylene cap. The I-CHEM molded-in septa retainer ring holds the septa securely in place without bonding to the cap,…

  • Non-Assembled Convenience Kits

    National Scientific

    Sample vials with PTFE-lined storage caps Available in clear or amber glass Each carton contains shrink-wrapped vials and PTFE-lined caps in plastic bags

  • Convenience Packs For WISP And Shell Vials

    J.G. Finneran

    Components packaged in a clear lid tray with 100 shell vials and 100 conical snap plugs. Snap Plugs are not attached to the vials and are in individual plastic bags. Fits into bench drawer for easy access and packaging keeps products visible and particle free.

  • Limited Volume Big Mouth Crimp Top Vials

    J.G. Finneran

    The Finneran Interlocked™ Vial is composed of a 12x32 glass vial and a clear glass limited volume insert fused together. This design eliminates movement of the insert, allows more consistent sample recovery, eliminates needle damage and concerns about contaminants around the fused seam/space…

  • Marathon Septa

    Chromatography Research Supplies

    High-performance GC Septa for autosampler use Outstanding lifetime Very low bleed Maximum temperature of 350°C Septum typically achieves 400 injections without failure when used with HP-style needles and autosampler needle guide. Soft, 45 Durometer, septa are easy on…

  • Vials, crimp top, convenience pack, 12 x 32 mm, large opening size 2 mL, clear…


    Material: PTFE/silicone septum, aluminum seal, clear glass vial Description: unassembled Packaging: pkg of 100 ea O.D. × H × I.D.: 12 mm × 32 mm × 6.0 mm Size: 2 mL Volume: 2 mL Fitting: for 11 mm crimp

  • Amber E-Z Vials With Aluminum Seals

    DWK Life Sciences (Wheaton)

    11 mm crimp finish 12 x 32 mm With or without patch Color coded aluminum seals E-Z Vials and 11 mm Aluminum Seals are available assembled together in convenience packs of 100. These amber vials are made of Type 1 borosilicate glass. The aluminum seals are available in four colors:…

  • Shell Vials


    Easy and quick to seal vial / closure combination Fire-polished neck Main application: for non-critical HPLC analyses Only suitable in cases of low requirements on tightness, as the plugs have no elastomeric sealing element PE stoppers with a diaphragm for safe penetration of the needle

  • Screw Neck Headspace vials, N 18


    MACHEREY-NAGEL Headspace screw neck vials N 18 are made from 1st hydrolytic class glass More convenient, consistent and safer sealing process compared to crimping (better reproducibility) 10 mL (clear) and 20 mL vials available (clear/amber) Compatible with CTC, Gerstel, Shimadzu and…

  • Polypropylene Screw Caps with Septa

    Agilent Technologies

    Polypropylene screw tops are for wide opening screw top vials. Precision-fit septa provide an evaporation-proof seal.

  • 11 mm Crimp Top Aluminum Blue Cap with PTFE/Red Rubber Septa


    PerkinElmer closures are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments.

  • Target Crimp Top Vial System. Standard Target High Recovery

    National Scientific

    For Agilent, Gilson, Hitachi and other autosamplers Precision formed neck for improved autosampler handling 40% wider opening 33 expansion glass (Type I Class A Borosilicate) Combine the convenience of a larger opening with the security of a tighter seal. Tightly controlled…

  • Round Bottom Headspace Vials

    Agilent Technologies

    Crimp top Use with 20 mm crimp caps Two sizes: 23 x 75 and 23 x 46 mm Round bottom glass headspace vials feature a 20 mm beveled crimp top that creates a much tighter seal than you get with a flat crimp surface. Vials are designed for use with Perkin-Elmer, Tekmar and Varian. …

  • Caps and Septa for Screw Thread Vials

    Agilent Technologies

    4 mL capacity vials Line of 13 x 425 mm caps with septa are for use with sample vials and as diffusion caps for wash vials. Caps also allow use as storage vials. This product is only available to U.S. Domestic Customers.

  • Snap Ring™ Vials

    J.G. Finneran

    Neck finish allows use of Snap Top Caps™ or standard aluminum seals. Designed to work in Shimadzu and Waters WISP™ 48 position autosamplers. Choose from clear or amber Type I borosilicate glass. ID design incorporates the StepVial feature that precisely centers a limited volume insert…

  • 4 mL Assembled Screw Thread Vial Kits

    National Scientific

    4 mL Capacity Assembled kits include 100 vials with pre-attached caps and septa Packaged in convenient trays with clear covers Vial trays are stackable for easy storage and feature alpha-numeric indexing Vial trays hold vials upright for easy filling and maintaining sample order

  • Wisp Style Snap Seal Vials

    J.G. Finneran

    Type I borosilicate glass Clear or amber Neck finish allows use of Snap Top Caps™ or standard aluminum seals. Snap Seal finish eliminates the need for crimping or decapping. Designed to work in Shimadzu and Waters WISP 48 Position Autosamplers. Incorporate the StepVial design that…

  • Screw Thread Glass Vials

    Agilent Technologies

    8-425 thread design Original, narrow neck size Uniformly flat bottoms ensure compatibility with inserts Vials are available with black caps and a variety of septa to meet your application needs. 2 mL 8-425 screw top glass vials (2714S22, S23, S61) Vials accommodate a…

  • Headspace Vials, Crimp Top

    DWK Life Sciences (Wheaton)

    Manufactured from Type I borosilicate glass Flat bottom vials are designed for use with older Agilent Headspace Autosamplers Beveled finish forms a tight seal with crimp headspace seals Compatible with WHEATON 20mm crimp headspace seals

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.