Tubing

Compare Tool

Select up to 3 products

Sort
View
Show
  • 8mm O.D. Thin Walled Precision NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Pyrex® NMR Capillary Tubes

    Wilmad-LabGlass - SP Scienceware

    Wilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field

  • 5mm O.D. Thin Walled Economy NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    Designed for routine use in all NMR spectrometers, Wilmad Economy NMR Tubes are guaranteed to fit tightly in any spinner turbine and have zero NMR background. Best OD tolerance in the industry and a 30% thicker wall than any competitors' product Manufactured in an ISO 9001:2008 USA…

  • X-Band Economy Brand EPR Quartz Tubes

    Wilmad-LabGlass - SP Scienceware

    Wilmad X-Band Economy Brand EPR Quartz Tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Tight ID and OD tolerances ensure 100% compatibility to spectrometers Individually wrapped to prevent contamination Comes with a cap

  • 5mm Screw-Cap NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    Commonly used in sample degasification these tubes can maintain vacuum quality of >10-4 torr. For better vacuum, please check our Pressure/Vacuum Tube and Quick Pressure Valve Tube. Tube comes complete with open top screw cap and septum. Caps and septa can be ordered separately.

  • Susceptibility Matched Shigemi® Tubes

    Wilmad-LabGlass - SP Scienceware

    Shigemi tube features a susceptbility matched bottom and plunger for each of the following solvents: CDCL3 CD3OD D2O DMSO-d6 This feature would effectively reduce the boundary gradients at the edges of the coil. Therefore, it is no longer critical to keep the general NMR sample…

  • Universal Inlet Adapters with Screw Cap

    Wilmad-LabGlass - SP Scienceware

    Borosilicate glass universal inlet adapters are capable of sealing thermometers, syringes, pipets, etc. Insert probes can be positioned within the apparatus by loosening the screw cap on top of adapter and tightening to create a seal. Bottom of adapter features a Standard Taper joint. Supplied as a…

  • Universal Solvent Jet NMR Tube Washer

    Wilmad-LabGlass - SP Scienceware

    The Universal Solvent Jet NMR Tube Washer can be used for any length NMR sample tube by a simple adjustment of the flexible PTFE tubing. By loosening and retightening the fitting on the assembled washer head, the PTFE tubing that extends into the sample tube is adjusted to the proper length.…

  • Multi-Tube Jet Solvent NMR/EPR Tube Washer and Dryer

    Wilmad-LabGlass - SP Scienceware

    Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once. When an inverted tube is inserted onto the solvent transfer tubing and the open end is…

  • FEP NMR Tube Kit for Silicon NMR

    Wilmad-LabGlass - SP Scienceware

    Ideal for 29Si NMR experiments, this tube kit contains a silicone free FEP tube and 5mm OD glass adapter with two open ends. Use of a depth gauge to fine adjust position of the liner to ensure no glass protrudes in the Rƒ coil limit is suggested Rated for 500MHz experiments. …

  • Disposable NMR/EPR Tube Caps

    Wilmad-LabGlass - SP Scienceware

    Disposable NMR Tube Caps are manufactured from molded PVC or Polyethylene depending on the tube OD. The different colors help track samples based on various reference solvents. When using Chloroform or Acetone as reference solution, please avoid (1) direct contact between the sample and the…

  • Economy Single Tube Solvent Jet Washer/Cleaner

    Wilmad-LabGlass - SP Scienceware

    After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles. You can perform numerous wash steps and finish by pulling air through the tube to complete the procedure. Filter flasks…

  • X-Band Precision Brand EPR Quartz Tubes

    Wilmad-LabGlass - SP Scienceware

    Wilmad X-Band Precision Brand EPR Quartz tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Hold 10 to 15 times better tolerances on the inner diameter and 5 times smaller camber and concentricity vs economy brand tubes Ideal…

  • Low Pressure/Vacuum Suprasil® EPR Tubes

    Wilmad-LabGlass - SP Scienceware

    Wilmad’s low pressure/vacuum (LPV) Suprasil tube is ideal for anaerobic and gas-tight EPR experiments, and offers a convenient flame-free sealing solution for air sensitive or volatile liquid samples. Robust sealing system allows pressure build-up inside the sample Greaseless PTFE…

  • 5mm O.D. Medium Walled Precision NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Screw Cap EPR Sample Tubes

    Wilmad-LabGlass - SP Scienceware

    Now, sample tubes and storage vials have been joined! Save time and money with the Screw Cap EPR Tube; each come with a PTFE/Silicone Septum.

  • Pyrex® MAS Rotor Inserts

    Wilmad-LabGlass - SP Scienceware

    Designed for air-sensitive samples and semi-solid samples such as gels or highly viscous liquids, Pyrex® MAS Rotor Inserts allow samples to be sealed into an NMR rotor by heat-seal or epoxy. Note: A glove box may be required for sealing of air-sensitive samples.

  • 8" FEP NMR Tube Liners

    Wilmad-LabGlass - SP Scienceware

    For NMR investigations where corrosive chemical compounds such as hydrofluoric acid, ammonium bifluoride and concentrated hydroxide solutions are present, Wilmad’s 8" FEP NMR Tube Liners fit 7" NMR tubes and provide a contamination-free environment. Round-bottom,…

  • PTFE Thermometer Adapters with Compression Cap

    Wilmad-LabGlass - SP Scienceware

    These PTFE inner joint adapters have a threaded compression cap, four saddle O-rings and one Viton® O-ring for use with plain stem thermometers and inlet tubes. Accepts thermometers with O.D.'s from 3 to 7mm.

  • 5mm Micro Cell Assembly

    Wilmad-LabGlass - SP Scienceware

    Sample volume can be as little as 18µL 3 different inserts with various shapes (Spherical Bulb, Capillary Tube and Cylindrical Bulb) Outer tube (Precision Thin Walled) must be ordered separately depending on magnetic field strength Not recommended for variable temperature experiments…

  • X-Band Economy Brand EPR Suprasil® Tubes

    Wilmad-LabGlass - SP Scienceware

    Wilmad X-Band Economy Brand EPR Suprasil® tubes are manufactured from synthetic quartz which has 20 fold less paramagnetic impurities than naturally occurring quartz. Tight ID and OD tolerances ensure 100% compatibility to spectrometers Individually wrapped to prevent contamination …

  • Pressure Vacuum Valve NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    Wilmad’s Pressure Vacuum Tube is the most reliable NMR tube on the market for medium range pressure (<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE,…

  • 5mm O.D. Heavy Walled Precision NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Low Pressure/Vacuum Tubes

    Wilmad-LabGlass - SP Scienceware

    Wilmad’s low pressure/vacuum (LPV) tube is ideal for anaerobic and gas-tight NMR experiments, and offers a convenient flame-free sealing solution for air sensitive or volatile liquid samples. Robust sealing system allows pressure build-up inside the sample Greaseless PTFE piston…

  • Omni-Fit Valve NMR System

    Wilmad-LabGlass - SP Scienceware

    The Wilmad Omni-Fit NMR valve system is designed for easy injection of samples through a gas-tight syringe without the need for a glove box in anaerobic applications. Omni-Fit valve (OFV) is a complete accessory set Comprised of a 5mm end cap, 2 way valve, septum with cap, barrel…

  • 5mm O.D. Thin Walled Suprasil® NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    Wilmad Precision NMR Suprasil® (Synthetic Quartz) Tubes are manufactured from high purity synthetic fused silica materials with <0.005ppm Fe2O3 and outstanding optical characteristics in the deep UV to the near IR. Transmission rate from 190nm to 2600nm is well over 95% (10mm…

  • 10mm O.D. Economy NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    Wilmad-LabGlass 10 mm Economy NMR Tubes are manufactured from borosilicate glass that meets the ASTM Type 1 Class B standard and recognized as N51A. Due to its nature, this glass has much less thermal-shock resistance than Class A glass used for our Precision Tubes. It may contain Fe2O3 which is…

  • 3mm O.D. Thin Walled Precision NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 4mm O.D. Thin Walled Precision NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Stem Coaxial Small Volume NMR Inserts

    Wilmad-LabGlass - SP Scienceware

    Manufactured from ASTM Type 1, Class A Glass, these inserts are the most versatile and reliable coaxial small volume inserts available for various NMR experiments. Upper section of each insert fits snuggly into Wilmad’s 5mm OD Thin Walled Precision NMR Tubes Stem is held straight…

  • 10mm O.D. Thin Walled Quartz NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    Wilmad Precision NMR Quartz Tubes have an extremely low thermal expansion rate and high tensile strength which is 14 times more robust during the cooling/heating process than Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness,…

  • 5mm O.D. Ultra-Thin Walled Precision NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.