Tubing

Compare Tool

Select up to 3 products

1 - 32 of 37
Sort
View
Show
  • Rodaviss® Inner Joints.

  • Medium wall Pyrex borosilicate tubing, see specifications tab at the bottom of this page. Sold either by the length or by the case, see suggested products tab at the bottom of this page.  *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • Precision ground OD tubing for use with PTFE ferrule Swagelok® fittings.

  • The Sample Vault™ Series of NMR tubes with NorLoc™ caps are engineered for the new generation of high-throughput lab automation NMR systems. Designed for use with 96 position carriers that accept either the 103.5mm (4”) or 178mm (7”) with open or closed top caps.…

  • Tube is useful in protein hydrolysis, amino acid separations, freeze drying or any application under vacuum.

  • Tubing, PTFE (FEP)

    Chemglass

    Chemically inert and suitable for low pressure applications, FEP tubing is recommended for all connections in the high performance, low pressure liquid chromatography system. The tubing is extruded with an outer diameter tolerance of +/- .001in. The 1/8in tubing can withstand pressure up to 500…

  • “T” shaped tube having serrated ends for connection of rubber, latex or Tygon® tubing.

  • PFA hose connections with a Viton rubber seal for use with GL-14 or GL-18 glass screw threads. Enables the connection of cooling or vacuum hose by simply screwing either style (straight or bent) onto the glass thread instead of forcing tubing over a serrated glass connector. Connection will…

  • Pyrex® borosilicate rod. Sold by the length. *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • FEP heavy wall tubing for use with Chemglass process reactors. Used to connect components having 1/4", 1/2", or 3/4" OD glass connections.

  • Features: Equivalent to Tygon® R3603, Nalgene™ 180 Excellent alternative to latex More cost-effective than silicone Inner bore prevents any build-up Withstands autoclaving gamma sterilization Durometer hardness (shore A): 55 Temperature range: -58°F to…

  • Clear fused quartz socket joint. For clamps see CG-150.

  • Special wall Pyrex borosilicate tubing. Sold either by the length or by the case. *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • NORELL™ Screw Cap NMR Tubes have a convenient screw cap access with the security of a PTFE® seal. Supplied with open top cap & PTFE® septum for quick and clean access with a 22 gauge standard point needle.

  • Clear fused quartz outer joints in medium and full length.

  • Reusable PTFE sleeve with knurled, reinforced gripping ring for easy removal. Sleeve has reinforcement ribs on the outer surface that provide a vacuum tight seal to 1 mbar and also prevent the sleeve from sticking. Sleeve is .008in thick.

  • Serrations are tooled on both ends of an 8" length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pieces tooled on both ends).

  • Stainless Steel Quick connects terminating in a male M16 thread. Quick connects have fluorosilicone seals. Both male and female couplers have shutoffs. Quick connects provide a easy and convenient way to change out reactor systems or disconnecting hoses. Temperature range is -60 to 200° C. M16…

  • Designed for use with our CG-1975 heavy wall PTFE tubing. Fittings are made entirely of chemically inert corrosion resistant PFA PTFE.

  • Triple Insulated Flexible Hose. Flexible stainless steel tubing, insulated with fiberglass and silicone. Temperature Range -80 to 200°C. One end has beaded pipe fitting and the other is a 3/4"; Male NPT. Hoses Are Designed For Use With CG-1969-M High Flow Manifold Systems

  • Capillary Tubing

    Chemglass

    Pyrex Borosilicate capillary Tubing, single lengths

  • NORELL™ Standard Series™ NMR Tubes are manufactured out of ASTM Type 1 Class B glass, commonly referred to as N-51A. Applications that are suited for using this type of glass are routine NMR, where samples are run under room temperatures with no thermal gradients, for auto-sampling…

  • For connection of circulators to Chemglass reactors. Hoses are flexible stainless steel tubing, insulated with fiberglass and silicone. Temperature range -80 to 200°; C. Both ends have a M16 x 1 Female fitting for attachement directly to our inlet/outlet connections see CG-1969-A. Adapters are…

  • PFA straight adapter, compression to male NPT fittings are ideally suited for use in corrosive environments and chemical applications. The fitting design yields a leak-tight connection and requires no special tools to assemble. The connection is achieved by merely inserting the tubing into the…

  • Connections are tooled to form a flare for sealing directly to apparatus using the tubing as a holder. Serrations are tooled on both ends of an 8" length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pieces tooled on both ends).

  • Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the user’s thumb. Sprayer is used with low pressure air (5/PSI) or rubber pressure bulb. Sprayer consists of an…

  • PFA 90° adapter, compression to male NPT fittings are ideally suited for use in corrosive environments and chemical applications. The fitting design yields a leak-tight connection and requires no special tools to assemble. The connection is achieved by merely inserting the tubing into the…

  • Mating end of flange has a ground surface to provide for a liquid tight seal when greased and clamped with the CG-139 horseshoe clamp.

  • Heavy wall Pyrex borosilicate tubing, see specifications tab at the bottom of this page. Sold either by the length or by the case, see suggested products tab at the bottom of this page.  *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • PFA elbow compression fittings are ideally suited for use in corrosive environments and chemical applications. The fitting design yields a leak-tight connection and requires no special tools to assemble. The connection is achieved by merely inserting the tubing into the fitting assembly and…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.