Glass Tubing

Compare Tool

Select up to 3 products

1 - 32 of 80
Sort
View
Show
  • PYREX® Standard Wall Glass Tubing

    Corning

    Made of a low expansion borosilicate composition with high chemical resistance Meets all U.S. pharmacopoeia specifications for Type 1A glass 4 to 32mm O.D. sizes are 1219mm long ± approximately 6mm. 4mm O.D. have ends cut, while 5 to 32mm sizes have ends fire polished. 35 to 178mm…

  • Pyrex® NMR Capillary Tubes

    Wilmad LabGlass

    Wilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field

  • Premium Standard Wall Borosilicate Capillaries

    Warner Instruments

    This capillary glass is precision drawn to insure reliability and consistency from batch to batch. Warner capillary glass is known worldwide for its consistent high quality The full line of glass capillaries listed here is stocked for fast shipment Ends are fire polished to prevent…

  • 5mm O.D. Thin Walled Quartz NMR Tubes

    Wilmad LabGlass

    Wilmad Precision NMR Quartz Tubes have an extremely low thermal expansion rate and high tensile strength which is 14 times more robust during the cooling/heating process than Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness,…

  • Thin Walled High Throughput NMR Tubes

    Wilmad LabGlass

    Wilmad Thin Walled High Throughput NMR Tubes have an average camber of 60 microns to guarantee the clarity of the spectrum for small molecule (MW<250) samples up to 600 MHz. Camber and concentricity values listed are the Total Indicator Reading (TIR) Designed for routine use in most…

  • Economy Single Tube Solvent Jet Washer/Cleaner

    Wilmad LabGlass

    After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles. You can perform numerous wash steps and finish by pulling air through the tube to complete the procedure. Filter flasks…

  • 5mm Screw-Cap NMR Tubes

    Wilmad LabGlass

    Commonly used in sample degasification these tubes can maintain vacuum quality of >10-4 torr. For better vacuum, please check our Pressure/Vacuum Tube and Quick Pressure Valve Tube. Tube comes complete with open top screw cap and septum. Caps and septa can be ordered separately.

  • 3mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Truebore, Precision Glass Tubing

    Ace Glass

    Inside diameter tolerance of 0.0004", Trubore, a trademark of Ace Glass Incorporated, stands for precision bore tubing of the highest quality, maintained by production techniques, careful selection of raw materials, and step-by-step quality control. Trubore tubing is used in ACE items such as our…

  • 5mm O.D. Medium Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 10mm O.D. Economy NMR Tubes

    Wilmad LabGlass

    Wilmad-LabGlass 10 mm Economy NMR Tubes are manufactured from borosilicate glass that meets the ASTM Type 1 Class B standard and recognized as N51A. Due to its nature, this glass has much less thermal-shock resistance than Class A glass used for our Precision Tubes. It may contain Fe2O3 which is…

  • Low Pressure/Vacuum Tubes

    Wilmad LabGlass

    Wilmad’s low pressure/vacuum (LPV) tube is ideal for anaerobic and gas-tight NMR experiments, and offers a convenient flame-free sealing solution for air sensitive or volatile liquid samples. Robust sealing system allows pressure build-up inside the sample Greaseless PTFE piston…

  • Bubbler, No-Air

    Ace Glass

    Bubbler with metering valve for precise control of inert gas introduction and features 9mm OD tube-end side arms for use with 3/8in ID vacuum tubing.

  • Universal Solvent Jet NMR Tube Washer

    Wilmad LabGlass

    The Universal Solvent Jet NMR Tube Washer can be used for any length NMR sample tube by a simple adjustment of the flexible PTFE tubing. By loosening and retightening the fitting on the assembled washer head, the PTFE tubing that extends into the sample tube is adjusted to the proper length.…

  • X-Band Precision Brand EPR Quartz Tubes

    Wilmad LabGlass

    Wilmad X-Band Precision Brand EPR Quartz tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Hold 10 to 15 times better tolerances on the inner diameter and 5 times smaller camber and concentricity vs economy brand tubes Ideal…

  • NMR Tubes for Bruker® MicroProbe and MicroCryoProbe

    Wilmad LabGlass

    Ten times more precise in terms of camber and concentricity than capillary tubes. Ideal for Ultra-High Field (>600MHz) experiments Recommended for Bruker® MicroProbe and MicroCryoProbe Includes disposable cap

  • 18mm O.D. Medium Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Reaction Monitoring System

    Wilmad LabGlass

    Designed to monitor reactions from start to finish, the Wilmad-LabGlass Reaction Monitoring System is a two-chamber borosilicate glass NMR tube that allows for in-tube mixing. The system features an inner chamber with a Teflon® tip that when secured creates a positive seal separating solutions…

  • 5mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Disposable NMR/EPR Tube Caps

    Wilmad LabGlass

    Disposable NMR Tube Caps are manufactured from molded PVC or Polyethylene depending on the tube OD. The different colors help track samples based on various reference solvents. When using Chloroform or Acetone as reference solution, please avoid (1) direct contact between the sample and the…

  • Pressure Vacuum Valve NMR Tubes

    Wilmad LabGlass

    Wilmad’s Pressure Vacuum Tube is the most reliable NMR tube on the market for medium range pressure (<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE,…

  • Omni-Fit Valve NMR System

    Wilmad LabGlass

    The Wilmad Omni-Fit NMR valve system is designed for easy injection of samples through a gas-tight syringe without the need for a glove box in anaerobic applications. Omni-Fit valve (OFV) is a complete accessory set Comprised of a 5mm end cap, 2 way valve, septum with cap, barrel…

  • 5mm O.D. Thin Walled Suprasil® NMR Tubes

    Wilmad LabGlass

    Wilmad Precision NMR Suprasil® (Synthetic Quartz) Tubes are manufactured from high purity synthetic fused silica materials with <0.005ppm Fe2O3 and outstanding optical characteristics in the deep UV to the near IR. Transmission rate from 190nm to 2600nm is well over 95% (10mm…

  • SYNTHWARE NMR Tube Washer

    Kemtech America

    With 24/40 inner joint and 10mm hose connection. For 5mm NMR tube only. The NMR tube is inserted into the tube cleaner with its plastic cap placed on the closed end to provide support and a vacuum seal. The washing solvent is sequentially added through the side tube while a vacuum is applied…

  • PYREX® Capillary Gas Delivery Tubes

    Corning

    These Capillary Gas Delivery Tubes are replacement parts for the 6949M series of PYREX® microchemistry kits.

  • Medium Tubing 1.75" X 0.09" X 48.25"

    DWK Life Sciences (Kimble)

    33 expansion borosilicate glass tubing with cut ends. Medium wall precision bore tubing Tubing has a low coefficient of expansion and a high resistance to chemical attack Conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • 10mm O.D. Medium Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 4mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 10mm Screw-Cap NMR Tubes

    Wilmad LabGlass

    Commonly used in sample degasification these tubes can maintain vacuum quality of >10- 4 torr. For better vacuum, please check our Pressure/Vacuum Tube and Quick Pressure Valve Tube. Tube comes complete with open top screw cap and septum. Caps and septa can be ordered separately

  • Pyrex® MAS Rotor Inserts

    Wilmad LabGlass

    Designed for air-sensitive samples and semi-solid samples such as gels or highly viscous liquids, Pyrex® MAS Rotor Inserts allow samples to be sealed into an NMR rotor by heat-seal or epoxy. Note: A glove box may be required for sealing of air-sensitive samples.

  • Stem Coaxial Small Volume NMR Inserts

    Wilmad LabGlass

    Manufactured from ASTM Type 1, Class A Glass, these inserts are the most versatile and reliable coaxial small volume inserts available for various NMR experiments. Upper section of each insert fits snuggly into Wilmad’s 5mm OD Thin Walled Precision NMR Tubes Stem is held straight…

  • Bruker SampleJet NMR Tubes

    Wilmad LabGlass

    Authentic Bruker® SampleJet® cap without code, up to 600 MHz. Do not use with Ceramic spinners.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.