Simport Laboratory Tubes
-
Made of polypropylene Rotor-Gene™ analyzer was formerly designed by Corbett. These RotoCycler™ strips are perfectly designed to perform on Rotor-Gene™ instruments. Tube strips are packaged separately from cap strips. The frosted extensions on caps not only make them more…
-
Sample Tube
SimportTube made of polypropylene / Cap made of polyethylene Conical bottom tubes with self-standing base graduated from 10 to 30 ml and 10 to 50 ml respectively in 5 ml increments. Chemically resistant and shatterproof, they are supplied with a leakproof screw cap, particularly important when…
-
These new tubes have molded ridges matching serrations on racks such as the Simport T360 OneHand™ microtube rack, thus allowing the removal of caps with one hand. All Simport® Micrewtube® closures can be used on these tubes. Manufactured of exceptionally high-quality, transparent polypropylene…
-
5.0mL ClickLok™ MCT with insert cavity snap cap, designed for processing medium-sized sample volumes. The 16mm tube is compatible with 15mL centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121°C to -196°C.
-
Made of polypropylene Cap made of polyethylene The flexible sealing lip inside the cap ensures a positive leakproof seal under even the most adverse conditions. This deep internal lip fits snugly against the interior wall of the tube preventing the contents from coming in contact with the…
-
Made of polypropylene RNase, DNase, Pyrogen and DNA-free Conical bottom facilitates sample aspiration
-
Cultubes™ Sterile Culture Tubes
SimportMade of either polystyrene or polypropylene For users who prefer a more compact packaging with tubes oriented horizontally. Tubes are placed in a convenient space saving plastic tray. Stateof- the-art packaging keeps your tubes neatly aligned for easing manipulation. For further details…
-
0.1ml PCR Rigid Strips
Simport.1ml PCR Rigid Strips Polypropylene This flat cap low profile model has a volume of only 100 μl per tube, for a total of 8 tubes
-
Tube made of polystyrene / Cap made of polyethylene. These 8 ml screw cap tubes are available either sterile or non sterile. A special tamper evident cap is offered for applications needing the utmost security where sample integrity is of high importance. Tubes are made of optically clear…
-
-
Graduated Micrewtube®
SimportMade of polypropylene For your special needs, these tubes are identical to the T341 Series but are graduated and are provided with a white marking area for sample identification. Can be used at extreme temperatures from -196°C to +121°C. Certified RNase-, DNase-, Pyrogen-…
-
Made of polypropylene This series of tubes is also available either plain or with printed graduations and white marking area for sample identification. O-ring seal screw caps are unattached but incorporate a flat top which provides a writing surface. These flat surfaced caps can be used with…
-
Cultubes™ Sterile Culture Tubes
SimportMade of either polystyrene or polypropylene For users who prefer a more compact packaging with tubes oriented horizontally. Tubes are placed in a convenient space saving plastic tray. Stateof- the-art packaging keeps your tubes neatly aligned for easing manipulation. For further details…
-
-
Made of polyethylene The unique design of the CapLock™ provides extra security against inadvertent cap openings on critical samples or during incubation above 80 °C.
-
Microcentrifuge Tube
SimportExtra clarity for better visual inspection Boil-proof design Ultra rugged walls made for high speed centrifugation Unique ClickLok™ sealing mechanism Made of highest purity polypropylene Made of polypropylene These 0.6 ml and 1.5 ml graduated rugged tubes are made of laboratory…
-
Disposable Culture Tubes
SimportPrecision molded Virgin thermoplastic Chemically clean Made of either polystyrene or polypropylene, these tubes are ideal for use in bacteriology, RIA, coagulation and other routine laboratory procedures. No mold release agents are used that could cause errors and interferences in RIA…
-
For medium-sized sample volumes. The 16mm tube is compatible with 15 ml centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121 °C to -196 °C.
-
Made of polypropylene Simport Reaction Strips include 8 or 12 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer, therefore reducing PCR reaction time in most 96-well “V” bottomed thermal cyclers such as MJ Research, Perkin Elmer,…
-
17 mm outside diameter Plug type push-in caps are made of polyethylene for test tubes with outside diameters of 17 mm. Dual position caps can be closed but not sealed so that samples are maintained aerobic for microbiological procedures, or caps can be pushed tight and fully sealed for…
-
Made of polypropylene RotoCycler™ Discs are specially made to be used with the Qiagen Rotor-Gene™ Q Real-Time Rotary Analyzer. Two models are available: a 72-well format with 100 µL tubes and a 100-well format for reactions up to 25 µL. The discs are a one-piece "plate" equivalent, having…
-
Microcentrifuge Tube Storage Box
SimportMade of high impact polystyrene This microcentrifuge tube storage box with a polyurethane foam insert is ideal for holding up to 64 tubes from 0.5 ml to 2 ml. It should be used within a temperature range of -90 °C to 80 °C. A transparent cover allows you to see the contents of the box,…
-
Made of polypropylene Cap made of polyethylene Similar to the T336 Series but without the "tethered cap" feature. This series of tubes is available either plain or with printed graduations and white marking area for sample identification. They have all the other fine features of…
-
Made of polypropylene This thin wall 0.2mL tube is very useful when processing smaller volumes. It offers optimum contact with thermal cycler blocks. The ultrathin wall will ensure rapid thermal transfer and a significant reduction in cycle and PCR reaction time. Specially designed with a…
-
Microlock Centrifuge Tubes
SimportGraduated, 1.5 mL total capacity Seals securely with one hand Pierceable lid Graduated, rugged tubes are designed to withstand the stress of high speed centrifugation up to 17,000 rpm. The Microlock ® closure has a latch feature that eliminates sample loss and hazardous…
-
Cultubes™ Sterile Culture Tubes
SimportMade of polystyrene or polypropylene These disposable sterile tubes can be used for most routine laboratory procedures. They are biologically inert and exempt from mold release agents. Precision molding with virgin thermoplastics ensures that our tubes will be uniform in size and shape. High…
-
Made of polypropylene This more convenient 0.2 ml tube strip incorporates individually attached caps. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer. …
-
At any time the Color Coded Insert could be applied to the tube closure, which eliminates jeopardizing the integrity of your sample by transferring it to another vial. It is manually press fit and locks into place on top of closure.
-
Amplitube™, Dome Cap
SimportMade of polypropylene Simport Reaction Strips include 8 or 12 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer, therefore reducing PCR reaction time in most 96-well "V" bottomed thermal cyclers such as MJ…
-
RotoCycler™ 72 Workstation
SimportMade of aluminum To facilitate the handling and insertion of caps on the tubes, Simport offers a special solid aluminum loading rack. This rack can hold up to 18 x 0.1 ml tube strips for a total of 72 tubes. Other cavities can hold larger reaction tubes. To keep reactions cool…