Simport Laboratory Tubes
-
17 mm outside diameter Plug type push-in caps are made of polyethylene for test tubes with outside diameters of 17 mm. Dual position caps can be closed but not sealed so that samples are maintained aerobic for microbiological procedures, or caps can be pushed tight and fully sealed for…
-
These new tubes have molded ridges matching serrations on racks such as the Simport T360 OneHand™ microtube rack, thus allowing the removal of caps with one hand. All Simport® Micrewtube® closures can be used on these tubes. Manufactured of exceptionally high-quality, transparent polypropylene…
-
Made of polypropylene Cap made of polyethylene The flexible sealing lip inside the cap ensures a positive leakproof seal under even the most adverse conditions. This deep internal lip fits snugly against the interior wall of the tube preventing the contents from coming in contact with the…
-
Tube made of polystyrene / Cap made of polyethylene. These 8 ml screw cap tubes are available either sterile or non sterile. A special tamper evident cap is offered for applications needing the utmost security where sample integrity is of high importance. Tubes are made of optically clear…
-
Made of polypropylene RNase, DNase, Pyrogen and DNA-free Conical bottom facilitates sample aspiration
-
Made of polypropylene Rotor-Gene™ analyzer was formerly designed by Corbett. These RotoCycler™ strips are perfectly designed to perform on Rotor-Gene™ instruments. Tube strips are packaged separately from cap strips. The frosted extensions on caps not only make them more…
-
Made of polypropylene This more convenient 0.2 ml tube strip incorporates individually attached caps. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer. …
-
Micrewtube®
SimportMade of polypropylene Can be used at extreme temperatures from -196°C to +121°C. Tubes and caps in the Micrewtube® Family are certified RNase, DNase, DNA and Pyrogen free.
-
Made of polypropylene Cap made of polyethylene Similar to the T336 Series but without the "tethered cap" feature. This series of tubes is available either plain or with printed graduations and white marking area for sample identification. They have all the other fine features of…
-
Cultubes™ Sterile Culture Tubes
SimportMade of polystyrene or polypropylene These disposable sterile tubes can be used for most routine laboratory procedures. They are biologically inert and exempt from mold release agents. Precision molding with virgin thermoplastics ensures that our tubes will be uniform in size and shape. High…
-
When quality matters choose the AMPLITUBE™ Made of polypropylene This more convenient 0.2 ml tube strip incorporates individually attached caps. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultrathin sidewalls and bottoms…
-
Conical Centrifuge Tubes
SimportDisposable tubes are suitable for general centrifugation, urinalysis procedures and serum separation 15 mL polypropylene tubes Chemically clean Metal-free Tubes resist speeds of up to 5,000 rpm Ready-to-use and uniform in size and shape, measuring 17 x 120 mm. Graduations are at 0.25, 0.5,…
-
Made of polypropylene Simport Reaction Strips include 8 or 12 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer, therefore reducing PCR reaction time in most 96-well “V” bottomed thermal cyclers such as MJ Research, Perkin Elmer,…
-
Made of polyethylene The unique design of the CapLock™ provides extra security against inadvertent cap openings on critical samples or during incubation above 80 °C.
-
-
Made of polypropylene This series of tubes is also available either plain or with printed graduations and white marking area for sample identification. O-ring seal screw caps are unattached but incorporate a flat top which provides a writing surface. These flat surfaced caps can be used with…
-
Microcentrifuge Tube Storage Box
SimportMade of high impact polystyrene This microcentrifuge tube storage box with a polyurethane foam insert is ideal for holding up to 64 tubes from 0.5 ml to 2 ml. It should be used within a temperature range of -90 °C to 80 °C. A transparent cover allows you to see the contents of the box,…
-
Microlock Centrifuge Tubes
SimportGraduated, 1.5 mL total capacity Seals securely with one hand Pierceable lid Graduated, rugged tubes are designed to withstand the stress of high speed centrifugation up to 17,000 rpm. The Microlock ® closure has a latch feature that eliminates sample loss and hazardous…
-
Microcentrifuge Tube
SimportExtra clarity for better visual inspection Boil-proof design Ultra rugged walls made for high speed centrifugation Unique ClickLok™ sealing mechanism Made of highest purity polypropylene Made of polypropylene These 0.6 ml and 1.5 ml graduated rugged tubes are made of laboratory…
-
5.0mL ClickLok™ MCT with insert cavity snap cap, designed for processing medium-sized sample volumes. The 16mm tube is compatible with 15mL centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121°C to -196°C.
-
0.1ml PCR Rigid Strips
Simport.1ml PCR Rigid Strips Polypropylene This flat cap low profile model has a volume of only 100 μl per tube, for a total of 8 tubes
-
Made of polypropylene Having all the advantages of our popular T341T Series, the specially formulated polypropylene used to manufacture these tubes provides a low adhesion surface to obtain maximum sample yield. Ideal for research procedures such as nucleic acid amplifications, protein work…
-
Disposable Culture Tubes
SimportPrecision molded Virgin thermoplastic Chemically clean Made of either polystyrene or polypropylene, these tubes are ideal for use in bacteriology, RIA, coagulation and other routine laboratory procedures. No mold release agents are used that could cause errors and interferences in RIA…
-
EconoTube™ Microcentrifuge Tube
SimportMade of polypropylene These Simport Centrifuge Tubes offer superb quality and performance at an affordable price. They feature an extended lip for easy opening. Marked graduations and frosted labeling panels on tube and cap for easy writing and identification. These Simport centrifuge tubes…
-
Cultubes™ Sterile Culture Tubes
SimportMade of either polystyrene or polypropylene For users who prefer a more compact packaging with tubes oriented horizontally. Tubes are placed in a convenient space saving plastic tray. Stateof- the-art packaging keeps your tubes neatly aligned for easing manipulation. For further details…
-
Graduated Micrewtube®
SimportMade of polypropylene For your special needs, these tubes are identical to the T341 Series but are graduated and are provided with a white marking area for sample identification. Can be used at extreme temperatures from -196°C to +121°C. Certified RNase-, DNase-, Pyrogen-…
-
Sample Tube
SimportTube made of polypropylene / Cap made of polyethylene Conical bottom tubes with self-standing base graduated from 10 to 30 ml and 10 to 50 ml respectively in 5 ml increments. Chemically resistant and shatterproof, they are supplied with a leakproof screw cap, particularly important when…
-
For medium-sized sample volumes. The 16mm tube is compatible with 15 ml centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121 °C to -196 °C.
-
Cultubes™ Sterile Culture Tubes
SimportMade of either polystyrene or polypropylene For users who prefer a more compact packaging with tubes oriented horizontally. Tubes are placed in a convenient space saving plastic tray. Stateof- the-art packaging keeps your tubes neatly aligned for easing manipulation. For further details…
-