Corning Tubes
Corning's centrifuge tubes are engineered for strength and are capable of withstanding high-speed centrifugation without compromising sample integrity. Their clarity and durability make them an ideal choice for a multitude of applications, from molecular biology to biochemistry.
Corning Tubes are available in various sizes and styles to accommodate different volumes and experimental requirements, ensuring that researchers have the right tools for their specific needs. With Corning Tubes, scientists can expect exceptional performance, improving the efficiency and accuracy of their laboratory workflows.
-
PYREX® Rimless Culture Tubes
CorningThese reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.
-
For 9195R10 series plant tissue culture tubes Autoclavable caps available in natural or orange color. Two positions: closed, for humidified environments; and open, for gas exchange. Drip ring minimizes contamination. Flexible interval ribs hold cap firmly in place.
-
PYREX Goetz Centrifuge Tubes
CorningWithout stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations: from 1 to 5 mL in 1 mL from 5 to 50 mL in 5 mL from 50 to 100 mL in 10 mL divisions
-
Centrifuge Tube 15 ml
CorningUniform glass distribution in the wall, taper and bottom of these 15mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy.
-
0.2mL PCR tubes (assorted colors) are made of thin wall polypropylene and designed for precise fit in heat blocks to optimize heat transfer With domed cap for efficient heat transfer Nonsterile and certified DNase- and RNase-free Autoclavable at 121°C and will withstand…
-
These disposable 20x150mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 30mL, are made from borosilicate glass, bulk-packed and are sold…
-
Improved design for secure sample preparation and storage Withstand centrifugation up to 3,000 RCF Manufactured from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with…
-
These 15mL PYREX® conical centrifuge tubes have white enamel graduations. The 15mL sizes are graduated upward from tip in 0.1mL divisions.
-
Plastic Caps With Teflon Liners
CorningAs supplied with 9212K21 series test tubes, with Teflon over-liner Cap size shown is GPI thread-finish
-
Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.
-
These 50mL PYREX® conical centrifuge tubes have white enamel graduations and are graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50 in 1mL divisions. The No. 16 Standard Taper pennyhead stopper is solid glass.
-
Widely used and referenced in laboratory protocols Dual position snap-cap prevents sample loss with ease of handling Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile) The foundation for consistent research…
-
These heavy duty 10mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity of these…
-
Tube 10 ml
CorningThese 10mL PYREX® conical centrifuge tubes are used in connection with the Wasserman test. Also used to measure H2O content and potassium ions in oil muds. API RP 13B standard testing method. They are graduated in 0.1 mL divisions up to 4 mL, and 0.2 mL divisions from 4 to 10 mL …
-
These disposable 20x125mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 24 mL, are made from borosilicate glass, bulk-packed and are sold…
-
These PYREX® gas dispersion tubes have a 30mm diameter coarse porosity (40 to 60µm) fritted disc and are used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity of the fritted disc and the liquid used. The finer porosity discs give smaller bubbles, however…
-
PYREX® Replacement Inlet Tube
CorningThis specially designed PYREX® inlet tube is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C) Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation…
-
These PYREX® replacement tubes fit the Kuderna Danish Apparatus and have an outer 19/22 Standard Taper joint. The tube graduations go from 0 to 2mL in 0.1mL increments and from 3mL on in 1.0mL increments.
-
PYREX Micro Tubes (Corning 8061)
CorningGraduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm
-
These 7x280mm PYREX® capillary tip bleed tubes are for bleeding gases, steam or liquids below the liquid surface of sidearm distillation flasks. This tube is also a replacement part for organic chemistry kits Nos. 6949E, 6949G-2 and 6949K.
-
Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…
-
Axygen® screw cap tubes feature a cap that provides a tight secure seal. Self standing screw top microcentrifuge tube with "O" ring cap Made of polypropylene Volume: 1.5mL Cap color: Red Pre-sterilized
-
These PYREX® ignition tubes are made from No. 7740 glass and are satisfactory for most applications encountered in school work where temperatures above 600°C are not required. These rimless tubes perform well when continually used at temperatures up to 500°C, or for short periods to 600°C.
-
Unattached HDPE rim seal caps provide a tight secure seal Polypropylene Self-standing Sterile Withstands a maximum RCF of 20,000 xg
-
Centrifuge Tube 12 ml
CorningThese 12mL heavy-duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length…
-
-
Axygen® 0.65mL and 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Features Available in 0.65mL single MiniTube or 1.1mL single MiniTube and…
-
Skirted, self-standing tubes with a conical bottom. Tubes are graduated at 1.0mL intervals and feature a large frosted writing area. Caps fit tubes securely for a leakproof seal. Sterile tubes come with caps attached. Transport tube comes with a blue cap Certified RNase, DNase, and…
-
Disposable Tissue Culture Tubes
CorningScrew cap, flat bottom, borosilicate glass (9215J30 and J50) Suitable for tissue culture and routine bacteriological work Flat bottom allows tube to stand unsupported 9215J30 tube takes size 15-415 cap; case of 1,000 contains four packages of 250 9215J50 tube takes size 18-415…
-
PYREX® Oil Centrifuge Tube
CorningGraduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…
-
PYREX® Oil Centrifuge Tubes
CorningPear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations: from 0 to 1/2 in 0.05 from 1/2 to 2 in 1/10 from 2 to 3 in 1/5 from 3 to 5 in 1/2 from 5 to 10 in 1 from 10 to…