Tubes

Compare Tool

Select up to 3 products

1 - 32 of 71
Sort
View
Show

  • Falcon® Round Bottom Test Tubes

    Corning

    Size: 75 mm long x 12 mm o.d.; capacity: 5 mL Designed for economical, one-time use Clear polystyrene, with deep, friction fit caps of lower density polyethylene Caps allow sealing or partial closure to permit gas transfer 9219F22 tubes are packed in bags of 25; case contains 20…

  • PYREX® Screw Cap Culture Tubes with Phenolic Caps

    Corning

    These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

  • Cell Strainers

    Corning

    Corning Cell Strainers are an easy and ready-to-use solution for obtaining a more uniform single cell suspension Nylon mesh provides a strong, uniform filtration device Strainers reduce chance of contamination Cell strainers fit inside a Falcon®™ 50 mL centrifuge tube.…

  • PYREX® Screw Cap Culture Tubes with PTFE Lined Phenolic Caps

    Corning

    These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

  • Self-Standing 5ml Conical Bottom Copolymer Screw Cap Centrifuge Tubes

    Corning

    Skirted, self-standing tubes with a conical bottom. Tubes are graduated at 1.0mL intervals and feature a large frosted writing area. Caps fit tubes securely for a leakproof seal. Sterile tubes come with caps attached. Transport tube comes with a blue cap Certified RNase, DNase, and…

  • Centrifuge Tube 15 ml

    Corning

    These 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI…

  • PYREX® Test Tubes

    Corning

    With lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.

  • Tube 10mL Self Stand Screw Cap

    Corning

    Skirted, self-standing tubes with a conical bottom Graduated at 1.0mL intervals and feature a large frosted writing area Caps fit tubes securely for a leakproof seal Sterile tubes come with caps attached

  • Disposable, Screw Cap, Borosilicate Glass Tissue Culture Tubes

    Corning

    Round bottom, with threaded neck; without marking spot Size 100 x 13 mm takes size 13-415 cap; other sizes take size 15-415 cap Cap is not supplied and must be purchased separately; see 9215F70 series Cases of 1,000 contain 4 packages of 250. Listings indicate length x o.d. in mm.

  • Polypropylene Microcentrifuge Tubes with Attached Screw Caps

    Corning

    Feature screw caps that provide a tight secure seal Sterile Attached cap with black silicone O-ring Withstands a maximum RCF of 20,000 x g

  • PYREX® Disposable Glass Culture Tubes with Marking Spot

    Corning

    Identical to 9215F20 series, but with marking spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass,…

  • PYREX® Oil Centrifuge Tubes

    Corning

    Pear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations:  from 0 to 1/2 in 0.05  from 1/2 to 2 in 1/10  from 2 to 3 in 1/5  from 3 to 5 in 1/2  from 5 to 10 in 1  from 10 to…

  • PYREX® Round Bottom Centrifuge Tubes

    Corning

    2619H22 Capacity 50 mL Heavy-duty tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall…

  • 5ml Self Standing Screw-Cap Tube with Blue Cap, Unassembled

    Corning

    Self-standing polypropylene transport tube comes with a blue cap Volume: 5mL; cap and tube material: virgin polypropylene Unassembled; non-sterile; autoclavable Provides a ‘leak-proof’ and reliable seal for critical sample storage Features a large, frosted writing area; …

  • PYREX® Oil Centrifuge Tube

    Corning

    Graduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…

  • Axygen® 96 Well Polypropylene Cluster Tubes

    Corning

    Axygen® 0.65mL and 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Features Available in 0.65mL single MiniTube or 1.1mL single MiniTube and…

  • Falcon® Tissue Culture Tubes

    Corning

    Tissue Culture Tubes with Screw Cap, Sterile Sterile, similar to 9217F60 in material and style 9217F80 tubes (Falcon® 2037) are 16 mL, individually wrapped; case contains 500 9217F86 tubes (Falcon® 2025) are 16 mL, packaged in bags of 125; case contains eight bags 9217G15…

  • PYREX® Conical Centrifuge Tubes

    Corning

    Graduated Capacity 50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length…

  • PYREX® Rimless Culture Tubes

    Corning

    These reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.

  • 50ml Conical Bottom Copolymer Screw Cap Centrifuge Tubes

    Corning

    Axygen Brand 50mL Screw Cap Centrifuge Tubes are designed to meet the needs of your laboratory. Made of durable polypropylene homopolymer, these tubes can withstand forces up to 12,000 RCF. Printed in two colors with a large writing surface. Centrifuge Rated to 12,000 x G Easy one hand…

  • Pyrex Oil Conical Centrifuge Tube

    Corning

    These 100mL PYREX® conical centrifuge tubes have white graduations and are used in accordance with standard methods of testing for water and sediment in petroleum products. These tubes are graduated upward to 0.5mL in divisions of 0.05mL; from 0.5mL to 2mL in divisions of 0.1mL; from 2mL to 3mL…

  • PYREX® Heavy Wall Rimless Ignition Tube

    Corning

    These PYREX® ignition tubes are made from No. 7740 glass and are satisfactory for most applications encountered in school work where temperatures above 600°C are not required. These rimless tubes perform well when continually used at temperatures up to 500°C, or for short periods to 600°C.

  • PYREX® Folin-Wu Digestion Tubes

    Corning

    Fabricated from specially selected tubing for product durability. Engraved white-filled graduations at 25 and 50 mL .

  • Disposable PYREX® Centrifuge Tubes

    Corning

    Improved design for secure sample preparation and storage Withstand centrifugation up to 3,000 RCF Manufactured from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with…

  • Disposable Phenolic Screw Caps with Rubber Liners

    Corning

    These disposable Corning® caps are made from phenolic resin and are autoclavable at 121°C. Caps are provided with a white rubber liner.

  • Costar® 1.7 mL Low Binding Snap Cap Microcentrifuge Tubes

    Corning

    These Costar® 1.7mL low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…

  • PYREX® Weathering Test Centrifuge Tubes

    Corning

    Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.

  • PYREX® VISTA Culture Tubes

    Corning

    Reusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.

  • PYREX Micro Tubes (Corning 8061)

    Corning

    Graduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm

  • Costar® 0.65 mL Low Binding Snap Cap Microcentrifuge Tubes

    Corning

    These Costar® low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…

  • Corning® 96 Well Polypropylene Cluster Tubes, Individual Format, Sterile, 96…

    Corning

    Cluster tubes are composed of 1.2mL 96 individual polypropylene tubes in a 96 well microplate rack with lidPolyethylene tube caps are available in 8-cap strips (Corning No. 4418)

  • PYREX® Diameter 90° Coarse Porosity Fritted Disc Gas Dispersion Tubes

    Corning

    These PYREX® tubes have a coarse porosity (40 to 60µm) fritted disc at an angle of 90° and are used to disperse or scrub gas in liquids. The approximate overall dimension across the disc and stem is 35mm for a 20mm disc. For more information on fritted products, please check the Guide to Selecting…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.