Multi Pupose Test Tubes and Accessories
-
Disp Culture Tube, 25x150 mm
Bellco GlassManufactured from Type 1 Class A Borosilicate Glass. Accepts Bellco stainless steel closures and KAPUT closures Specifications: Flint Glass #2 Wall Weight Type 1 Class A Borosilicate Glass Sizes: 25x150mm Closure Size: 25mm Case Quantity: 125
-
Hungate Tube Comp,16X125mm
Bellco GlassThe Hungate Anaerobic Culture Tube was developed for growing and maintaining anaerobic bacteria and culture conditions. method of hungate utilizes syringe methods for anaerobic. Technique: Exclude oxygen by flushing the tube with the desired gas Add 4.5mL of pre-reduced anaerobic agar…
-
50 mL Centrifuge Tubes with Caps
Caplugs Evergreen®50 mL centrifuge tubes are ideal for general purpose laboratory work. These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 50 mL tube with spork is also widely used in parasitology specimen transport. …
-
Widely used and referenced in laboratory protocols Dual position snap-cap prevents sample loss with ease of handling Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile) The foundation for consistent research…
-
INDUSTRIAL QUALITY 30ml (1oz) Test Tubes made of high quality, heavy duty, Borosilicate 3.3 glass THIN WALL Uniform wall thickness of 1.2mm provides excellent thermal shock resistance BEADED RIM Chip & crack resistant, fire polished beaded rims THERMAL SHOCK RESISTANT Autoclavable…
-
Microcentrifuge Tubes w/ Caps
Bellco GlassSuitable for laboratory centrifuge applications and the separation of substances, Microcentrifuge tubes accommodate smaller volumes of samples. Tubes featured a tethered cap for quick and easy closure. Caplugs Evergreen microcentifuge tubes are precision molded in the USA. Molded-in tethered cap…
-
Fermentation Tubes
GSC International, Inc.Borosilicate Glass. Available with and without base. With and without graduations.
-
Centrifuge Tubes 30 mL
Bellco GlassIdeal for general purpose laboratory work and useful as leak-proof secondary containers for shipping etiological specimens. Polypropylene co-polymer PPC is nearly transparent and is appropriate for use with solvents, alcohols, chlorinated aromatic hydrocarbons, except xylene and ketones. Note:…
-
Screw Top Transport Tubes & Caps
Thermo Scientific Capitol VialFeatures: Freestanding Nonsterile tubes 10 mL: Graduations in 1 mL increments up to 8 mL 0.59 O.D. x 3.38 in. L (15 x 86 mm) Round bottom with skirt Primary application: serum transport 12 mL: Etched fill lines at 5 mL and 8 mL 0.59 O.D. x…
-
Graduated Test Tubes with Beaded Rim
DWK Life Sciences (Kimble)Excellent choice for general laboratory use Plain top, beaded rim Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
RB Canister Only,38x135mm
Bellco GlassComponents will withstand repeated dry or steam heat sterilization. Specifications: Type 1 Class A Borosilicate Glass Optional Canister Only or Complete w/ Stainless Steel Closure Available Case Quantity: 6
-
S/C Cult Tube Only,38x200mm
Bellco GlassManufactured from Type 1 Class A Borosilicate glass, with a round bottom
-
Test Tube Baskets For Washing and Autoclaving
Thermo Scientific NalgeneConstructed of polypropylene Baskets hold test tubes, centrifuge tubes and bottles Designed for autoclaving, washing and incubating Each basket comes with a permanently attached lid. Tapered sides allow baskets of the same size to nest for storage. Slotted to allow complete drainage and…
-
-
INDUSTRIAL QUALITY 50ml (1.7oz) Test Tubes made of high quality, heavy duty, Borosilicate 3.3 glass THIN WALL Uniform wall thickness of 1.2mm provides excellent thermal shock resistance BEADED RIM Chip & crack resistant, fire polished beaded rims THERMAL SHOCK RESISTANT Autoclavable…
-
Test Tubes 17x100mm 16 mL
Bellco GlassSterile culture tubes are precision molded from premium-grade, chemically inert plastic materials: polystyrene (PS) for clarity and nearly-transparent polypropylene (PP) for toughness and chemical resistance. All tubes are packaged in easy-to-open bags of 25 tubes each. All tubes are gamma…
-
Disposable Culture Tubes
SimportPrecision molded Virgin thermoplastic Chemically clean Made of either polystyrene or polypropylene, these tubes are ideal for use in bacteriology, RIA, coagulation and other routine laboratory procedures. No mold release agents are used that could cause errors and interferences in RIA…
-
R/B Canister Only,38x300mm
Bellco GlassManufactured from Type 1 Class A Borosilicate Glass. Components will withstand repeated dry or steam heat sterilization. Specifications: Type 1 Class A Borosilicate Glass Size: 38x300mm Case Quantity: 6
-
INDUSTRIAL QUALITY 20ml (0.7oz) Test Tubes made of high quality, heavy duty, Borosilicate 3.3 glass THIN WALL Uniform wall thickness of 1.2mm provides excellent thermal shock resistance BEADED RIM Chip & crack resistant, fire polished beaded rims THERMAL SHOCK RESISTANT Autoclavable…
-
5mL Culture Tube and Dual Cap, PP, Sterile
Bellco GlassDual caps allow for either vented or sealed positions14mL tubes feature molded graduationsPolystyrene tubes are optically clear to visualize culturesPolypropylene tubes offer better chemical resistance
-
F/B Canister Comp,38X300mm
Bellco GlassManufactured from Type 1 Class A Borosilicate Glass. Bottom pad prevents chipping and breaking of pipette tips. All components can and will withstand repeated dry or steam heat serialization. No stainless steel closure included. Specifications: Material: Type 1 Class A Borosilicate Glass …
-
Storage Tube, Micro Schlenk
Ace GlassUsed for storage or simple reactions. With 10/10 or 14/10 outer joint externally threaded for making an O-RING-CAP-SEAL connection with mating inner joint. Stopcock on side arm is 1mm bore glass. Item supplied with holed cap, O-Ring and septa for sealing or syringe retrieval. For replacement caps…
-
Tubes W/2 Position Caps 5mL
Bellco GlassSterile culture tubes are precision molded from premium-grade, chemically inert plastic materials: polystyrene (PS) for clarity and nearly-transparent polypropylene (PP) for toughness and chemical resistance. Overfitting caps have inner ribs for two-position fits: loose for aerobic culturing and…
-
Disposable Closure, 13 mm, Yellow
Bellco GlassFor culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes
-
Test Tubes with Screw Caps
Caplugs Evergreen®Ideal for a variety of general laboratory applications. Threaded tubes are non-sterile and packaged with their screw caps. Polystyrene tubes provide clarity and are appropriate for use with mild acidic solutions, alkali solutions, alcohols, and salt. Polypropylene…
-
Borosilicate Glass Culture Tubes
Globe ScientificGlobe Scientific is pleased to offer these premium quality borosilicate glass tubes. The tubes provide excellent chemical resistance and durability. They feature well-rounded bottoms and smooth, fire-polished rims. Dimensional specifications are rigidly controlled for reliable, uniform results. The…
-
F/B Canister Only,38X300mm
Bellco GlassManufactured from Type 1 Class A Borosilicate Glass. Bottom pad prevents chipping and breaking of pipette tips. All components can and will withstand repeated dry or steam heat serialization. No stainless steel closure included. Specifications: Material: Type 1 Class A Borosilicate Glass …
-
Disposable Closure, 20 mm, Green
Bellco GlassFor culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes
-
R/B Canister Only,38X430mm
Bellco GlassManufactured from Type 1 Class A Borosilicate Glass. Components will withstand repeated dry or steam heat sterilization. Specifications: Type 1 Class A Borosilicate Glass Size: 38x430mm Case Quantity: 6
-