These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

BD Vacutainer® SST™ Tubes contain spray-coated silica to aid in clotting and a polymer gel for serum separation. Samples processed in these gold top serum separator tubes are used for serum determinations in chemistry, blood donor screening and infectious disease testing.* BD Vacutainer® SST™ Tubes…

0.5, 1.5 or 2.0 mL capacities Clear or amber Conical bottoms or freestanding Conical microcentrifuge tubes are made from a crystal clear resin that allows users to easily view samples. Polypropylene tubes are suitable for vapor phase liquid nitrogen storage, boiling and…

With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes

Easily remove Thermo Scientific™ Nalgene™ Friction-Fit Polypropylene Closures for Plastic Centrifuge Tubes from the centrifuge with a convenient pull tab. These autoclavable closures are designed to fit Nalgene™ round and conical centrifuge tubes. They may not be liquid-tight…

2.0mL SuperClear® Polypropylene snap cap microcentrifuge tubes with graduations. Tubes have frosted side labeling surface and a thin membrane cap that can be pierced easily by a syringe. Resealable bag. Spins to 20,000 RCF. Autoclavable. (122°C) With flat attached snap caps, side…

Withstand up to 50,000 x g in refrigerated or non-refrigerated centrifuges. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to 80% of the total capacity. With polypropylene screw closure.

A faster and easier alternative to gauze filtration in procedures involving dissociation of cells from either clumps or primary tissues      Consistently obtain a more uniform single-cell suspension      Three nylon mesh pore sizes for optimal performance in a…

BRAND PCR tube strips are manufactured from high-quality virgin plastics for excellent, reproducible results in most PCR applications. These tube strips are manufactured without lubricants or chemical additives that can contaminate reagents and samples. PCR tubes and plates from BRAND are…

Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet-nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. The 5, 10, and 15 mL sizes…

Axygen Brand 50mL Screw Cap Centrifuge Tubes are designed to meet the needs of your laboratory. Made of durable polypropylene homopolymer, these tubes can withstand forces up to 12,000 RCF. Printed in two colors with a large writing surface. Centrifuge Rated to 12,000 x G Easy one hand…

Screw cap, flat bottom, borosilicate glass (9215J30 and J50) Suitable for tissue culture and routine bacteriological work Flat bottom allows tube to stand unsupported 9215J30 tube takes size 15-415 cap; case of 1,000 contains four packages of 250 9215J50 tube takes size 18-415…

15mL & 50mL Conical Tubes High-clarity, medical-grade polymer Graduations every 1 mL (15 mL tube) or 5 mL (50 mL tube) increments Rated to 15,000 x G Temperature range: -80° to 40°C Tube racks are recyclable Both 50mL and 15mL tubes are BQ215 presented 25 tubes…

Eppendorf Protein LoBind Tubes are specifically designed for use in proteomics or other fields of protein research, where protein concentration tend to be very small and sample recovery is vital for assay results. Significantly more protein can be recovered for downstream analyses and enzymes…

Widely used and referenced in laboratory protocols      Dual position snap-cap prevents sample loss with ease of handling      Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile)   The foundation for consistent research…

These freestanding 50mL centrifuge tubes are available for use in those applications where a rack is not available. They include a large white solvent resistant writing area and black graduations. Available with either a flat cap or a plug style cap. Freezable (-80°C) and autoclavable…

Perform critical cellular applications with Thermo Scientific™ Nunc™ 14mL Round-Bottom Tubes. Features: Optimized gas exchange with dual position vent/close cap Off-gas volatile organic compounds easily with breathable packaging Certificates of conformity available…

Conical 15mL and 50mL centrifuge tubes are made of premium polypropylene for clarity and centrifugal strength. Tubes and caps may be frozen at temperatures as low as -86°C. The maximum centrifugal force is 12,000xg for the 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a flat top…

Pear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations:  from 0 to 1/2 in 0.05  from 1/2 to 2 in 1/10  from 2 to 3 in 1/5  from 3 to 5 in 1/2  from 5 to 10 in 1  from 10 to…

Ideal for high-speed centrifugation of aggressive chemicals. Excellent for chloroform and phenol extractions. Resists any acid, base or solvent. Autoclavable tubes withstand temperatures from -100°C to +150°C. For use in refrigerated and non-refrigerated centrifuges up to 50,000 x g. Before…

These PYREX® replacement tubes fit the Kuderna Danish Apparatus and have an outer 19/22 Standard Taper joint. The tube graduations go from 0 to 2mL in 0.1mL increments and from 3mL on in 1.0mL increments.

Glass or Plastic Glass Tube Size 13 X 100 mm Draw Volume 6 mL Closure Type/Color BD Hemogard™/Royal Blue Label Type Paper Additive/Concentration K2EDTA 10.8 mg Shelfpack 100 Case 1000

Labcon UVSafe™ tubes are designed to block 100% of Ultra violet light. They can be used instead of foil to shield samples sensitive to UV band radiation. They have been lab tested and certified to block UV light, but will still pass visible light so you can see your sample volume.…

Globe Scientific is pleased to offer these premium quality borosilicate glass tubes. The tubes provide excellent chemical resistance and durability. They feature well-rounded bottoms and smooth, fire-polished rims. Dimensional specifications are rigidly controlled for reliable, uniform results. The…

Tube, 1.7mL Micro, PP, YELLOW, 1000/PK, 500/BAG

Process tubes at their highest rated speed level (10,000 x g or greater) without leakage, even when full. Thermo Scientific™ Nalgene™ Sealing Cap Assemblies include a Viton™ fluoroelastomer o-ring. Also recommended when spinning hazardous materials compatible with centrifuge tube…

Bio-Reaction tubes offer a convenient and economical option for small scale, high density suspension cell culture. Bio-reaction tubes consist of centrifuge tubes with a 0.22μm hydrophobic membrane in the vent cap. These tubes are perfect for biological reaction experiments that require aseptic…

Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.

With two-position vent stopper that fulfills two functions: When attached lightly, this enables a uniform ventilation of the tube contents When attached firmly, by pressing in the stopper further, an airtight closure of the tub

Made from quartz. Used as reaction or sample tube in 7891 Turntable Reactor.