Traps
-
Sparger Fritted 25ml 1/2"
DWK Life Sciences (Kimble)These U-shaped spargers are specially designed for use with Teledyne Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers. 25 mL Fritted Sparger (2000/3000) with 3/4" mount Fritted spargers are recommended for potable water and wastewater samples…
-
Insect/Vegetation sweeping net 10" Diameter frame 36" lightweight aluminum handle Rubber grip for dependable handling 12" deep nylon net is durable for years of use This net has 10? frame, made of steel wire and 36? light weight aluminum handle with a rubber grip to ensure dependability when…
-
Adapter Valve No.15 O-Ring Joints
Ace GlassBorosilicate glass valve adapter with various Hi-Vac valve sizes and (2) No.15 O-Ring joints. Ideal for assembling Schlenk or vacuum lines Comes with (2) size -116 FETFE O-Rings.
-
SYNTHWARE Vacuum Traps, Spherical Joints
Kemtech AmericaVacuum Trap Kit with Spherical Joints. Includes trap body, top adapter, middle adapter, bottom adapter, and clamps. Body OD: 50mm, Body Length: 360mm
-
Vacuum Trap, Vertical Side Arm
Ace GlassModified version of 8750 series of vacuum traps, with side arm bent 90 degrees upward for easier attachment of vacuum tubing. For use with vacuum systems to capture undesirable vapors. Fits easily into Dewar flasks.
-
Vactrap™ XL Vacuum Trap System
Foxx Life SciencesFoxx Life Sciences VactrapXL™ is the world's most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, VactrapXL safely contains waste from supernatural removal, chemical separation, and cell or tissue culture media aspiration. Best of all,…
-
SYNTHWARE Vacuum Trap with #15 O-Ring Joint
Kemtech AmericaVacuum Trap Body Joint: 45/50 O-ring Joint Size: #15 Outer Body OD: 50mm Outer Body Length: 250mm below joint supplied with two size 116 Viton O-rings
-
-
Replacement glassware for Buchi rotary evaporators. The C glassware set is the most popular and is available with either a plain or safety coated outer trap. Outer trap bodies, codes -01 & -03 do not include plugs. Order separately 1 each 13295-08 and 1 each 13295-10.
-
Rotary Evaporator Bump Traps, Modified
ChemglassTrap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
-
Trap, Rotary Evaporator, Anti-Climb
Ace GlassUpper tubulation prevents migration of film and foam directly into the condenser.
-
SYNTHWARE Dual Vacuum Trap Assembly
Kemtech AmericaVacuum Trap Assembly, Dual Joints: #15 O-ring, with high vaccum valves
-
Vacuum Trap, Twin Chamber
Ace GlassTwin chamber vacuum trap for double protection against undesired vapors in a vacuum system. Trap can be used in a two liter Dewar flask such as 12540-07. Distance from outside of one body to outside of other is approximately 97mm; height is 250mm. Inlet and outlet have serrated fittings; O.D. of…
-
Trap, Rotary Evaporator, Elliptical
Ace GlassSpace saving, Elliptical shaped, bump trap. For use in Rotary Evaps between the steam tube and the evaporator flask. Prevents fluid from being drawn into the condenser. Shape allows for the same effect as standard traps but with less space between the flask and evaporator tube. This allows for use…
-
Vacuum Trap
Ace GlassUsed for freezing out undesired vapors in the vacuum system and also for use in conjunction with Dewar flasks.
-
Vactrap™2 Round Tubing
Foxx Life SciencesFoxx Life Sciences' Vactrap2™ is the world's most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, Vactrap2™ safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all,…
-
Trap, Rotary Evaporator, Anti-Splash
Ace GlassBump trap for use between the rotary evaporator's steam tube and evaporator flask, preventing fluid from being drawn into the condenser.
-
SYNTHWARE Cylindrical Vacuum Traps
Kemtech AmericaVacuum Trap, Cylindrical Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.
-
Two-Piece Vacuum Traps with Straight Top Stem
SP Wilmad-LabGlassMade of borosilicate glass, these vacuum traps consist of two pieces with a straight top stem. Both inlet and outlet stems are integral with the stopper. Body and stopper are connected by a full length Standard Taper joint.
-
Vacuum Traps, Threaded Body
Ace GlassConsists of Body with Ace-Thred, adjustable Inner Tube and Nylon Bushing with FETFE O-Ring. Available with optional threaded tubing adapters (-75,-78), or modified with #15 Ace-Threds on inlet/outlet for use with PTFE Ace-Safe connectors to allow safe easy tubing connect-disconnect. Simply attach…
-
Vacuum Trap, O-Ring Flange Connection
Ace GlassVacuum trap assembly with o-ring flange connection. This design has flexibility and ease of assembly-disassembly for cleaning. Comes with Viton o-ring and stainless steel pinch clamp.
-
With standard taper joint; 2 piece unit Top and side tubulations are 75 mm long and have same o.d. specified for inlet tube in listings Body lengths specified exclude joint; inlet tube extends to approximately 25 mm from bottom Body o.d. x length, inlet tube o.d. x length and…
-
High Vacuum System Trap
Ace GlassVacuum trap system protects gauge heads, like our 14034, and pumps from corrosive vapors and particle fouling. System consists of a Dewar flask, cold trap and inlet arm. High-vacuum stopcocks are used throughout. Gauge & inlet arm are Ace-Thred connections. Pump & manifold connections are o-ring joints.
-
-
Vacuum Trap / Manifold
Ace GlassSpecial Vacuum Apparatus that can be used as a complex trap with the bottom tube or as a small manifold by itself. Can be joined to ACE 8737,8738 or 8739 manifolds or as a stand alone manifold. The code -23 consists of the -03 manifold and our 8753-21 tube, making a trap unit. It has a 15mm o-ring…
-
Vacuum Trap Size 21
DWK Life Sciences (Kimble)Connections are 180º apart for easy installation into a variety of vacuum systems. Protects the mechanical pump from attack by corrosive vapors which can be condensed by using liquid nitrogen or dry ice/slurry mixtures.
-
Complete Vacuum Traps with 3/8" Hose Connections
SP Wilmad-LabGlassWidely used to protect vacuum pumps from contamination, these borosilicate glass vacuum traps are a one piece unit with two 3/8" hose connectors. Connectors are 180° apart to ease connection of heavy wall rubber tubing used in basic vacuum set-ups. These traps are frequently used with…
-
SYNTHWARE Micro Dewar Vacuum Traps
Kemtech AmericaVacuum Trap, Dewar, Micro Reservoir Capacity: 100mL Stopcock: Glass or Teflon options available 2mm Stopcock Bore
-
Two-Piece Vacuum Traps with Hose Connection
SP Wilmad-LabGlassThese borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.
-
-
Inert Atmosphere System, Ace-Burlitch
Ace GlassThis system is designed for maximum convenience and versatility in the handling of air-sensitive compounds in conjunction with Ace no-air labware or suitably adapted conventional glassware. Complete instructions on assembly, leak testing and preparation of the system are included. Components can be…
-
Moisture Removal S-Traps
Agilent TechnologiesContains Molecular Sieve 5 Angstrom, 45/60 mesh Traps can be reconditioned by heating at a minimum of 350°C, with flow for 6 hours. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies…