Traps
-
Thomas Nos. 1166V25, 1166V26 and 1166V28 Same as 8746 except adjustable inlet and outlet tubes have six ring hose connections. O.D. of smallest ring is 14mm; largest is 16mm. Thomas Nos. 1166V27 and 1166V29 Vacuum trap,Complete with a 51mm x 250mm body with a hose²connection side…
-
Dry Ice Condenser-Trap, with Ace-Threds
Ace GlassTwin chambered dry ice condenser-trap,for Rotary Evaporator use. Squatty design 18"high, two chambers. Dry ice fingers secured in main body via #50 Ace-Thred, bushings, and O-Rings allowing for easy cleaning. Two ports at top of chamber are 3/8" O.D. (for connecting to evaporator & vacuum source).…
-
Dean-Stark Moisture Traps
SP Wilmad-LabGlassCalibrated "to contain" at 20°C, these borosilicate glass moisture traps are used for the determination of water in various materials by distillation with an immiscible solvent. They consist of a full length Standard Taper inner joint for vapor tube connection to distilling flask and…
-
Freezing Section, 29/42
labForce® (powered by Thomas Scientific)Prevents corrosion by acid and alkaline vapors, moisture, etc., entrained during evacuation of distilling apparatus, vacuum desiccators, etc. Freezing trap, when immersed in suitable freezing mixture, removes condensable vapors, gauge liquid or other foreign material accidentally introduced…
-
Vacuum Trap Com Size 21
DWK Life Sciences (Kimble)Outlets are 180º apart for easy installation into a variety of vacuum systems. Protects the mechanical pump from attack by corrosive vapors which can be condensed by using liquid nitrogen or dry ice/slurry mixtures. Two-piece construction allows removal of condensate.
-
-
Adapter, Distilling Trap
Ace GlassDistilling trap adapter with outer joint top and inner joint bottom
-
Bidwell-Sterling Moisture Traps
SP Wilmad-LabGlassMade of borosilicate glass, these Bidwell-Sterling moisture traps are calibrated "to contain" (TC) at 20°C and are used for determining moisture in samples by distilling with an immiscible liquid. Consist of vapor tube, return tube, round bottom graduated tube, and Standard Taper…
-
Bubbler Mineral Oil
DWK Life Sciences (Kimble)Used with mineral oil to observe gaseous addition to reactions. May be used to vent a reaction mixture to the atmosphere. Tubing connections are 8 mm O.D. and may be used with 179730-0808 or 179920-0808 to join multiple bubblers if necessary.
-
Rotary Evaporator Bump Traps, Modified
ChemglassTrap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
-
O-Ring Style Vacuum Traps
ChemglassSimilar to CG-4515 traps but having an o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration…
-
Trap, Rotary Evaporator, Anti-Climb
Ace GlassUpper tubulation prevents migration of film and foam directly into the condenser.
-
Vactrap™ G
Foxx Life SciencesFoxx Life Sciences’ Vactrap™ G (Glass) is the ultimate vacuum trap system, adhering to the strictest CDC recommendations for laboratory safety. With its new continuous full vacuum rating, it is ideal for protecting vacuum lines and users. Vactrap™ G safely contains waste produced during supernatant…
-
Trap, Rotary Evaporator, Anti-Splash
Ace GlassBump trap for use between the rotary evaporator's steam tube and evaporator flask, preventing fluid from being drawn into the condenser.
-
Sparger Fritted 25ml 1/2"
DWK Life Sciences (Kimble)These U-shaped spargers are specially designed for use with Teledyne Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers. 25 mL Fritted Sparger (2000/3000) with 3/4" mount Fritted spargers are recommended for potable water and wastewater samples…
-
Moisture Removal S-Traps
Agilent TechnologiesContains Molecular Sieve 5 Angstrom, 45/60 mesh Traps can be reconditioned by heating at a minimum of 350°C, with flow for 6 hours. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies…
-
Replacement glassware for Buchi rotary evaporators. Available with either a plain or safety coated outer trap. Outer trap bodies, codes -01 and -03 do not include a plug. Order separately 1 each 13295-10.
-
Glass Trap for CentriVap Cold Traps
LabconcoGlass Trap fits inside the CentriVap Cold Trap's collector chamber to protect the chamber and lid from corrosive materials. Includes insulative cover, 1/2" stems and elbows. Included with CentriVap Acid Systems. Not compatible with pre-2005 CentriVap Cold Traps. Shipping weight 4 lbs. (2 kg)
-
Vacuum Trap, Twin Chamber
Ace GlassTwin chamber vacuum trap for double protection against undesired vapors in a vacuum system. Trap can be used in a two liter Dewar flask such as 12540-07. Distance from outside of one body to outside of other is approximately 97mm; height is 250mm. Inlet and outlet have serrated fittings; O.D. of…
-
SYNTHWARE Dewar Type Vacuum Traps
Kemtech AmericaVacuum Trap, Dewar Type Capacity: 250, 500, and 1000mL available Stopcock: Glass or Teflon Options available Stopcock Bore: 4mm
-
-
Same as 8751 except with six ring hose connections on inlet and outlet tubes. O.D. of smallest ring is 14mm; largest is 16mm.
-
Inert Atmosphere System, Ace-Burlitch
Ace GlassThis system is designed for maximum convenience and versatility in the handling of air-sensitive compounds in conjunction with Ace no-air labware or suitably adapted conventional glassware. Complete instructions on assembly, leak testing and preparation of the system are included. Components can be…
-
Bump trap for use between a rotary evaporator's steam tube and evaporator flask, preventing fluid from being drawn into the condenser. Improved design incorporates two drain holes to expedite the return of solvent to the evaporator flask.
-
Two-Piece Vacuum Traps with Hose Connection
SP Wilmad-LabGlassThese borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.
-
Vacuum Trap / Manifold
Ace GlassSpecial Vacuum Apparatus that can be used as a complex trap with the bottom tube or as a small manifold by itself. Can be joined to ACE 8737,8738 or 8739 manifolds or as a stand alone manifold. The code -23 consists of the -03 manifold and our 8753-21 tube, making a trap unit. It has a 15mm o-ring…
-
SYNTHWARE Large Volume Vacuum Traps
Kemtech AmericaVacuum Trap, Large Volume Capacity: 500 and 1000mL available.
-
With standard taper joint; 2 piece unit Top and side tubulations are 75 mm long and have same o.d. specified for inlet tube in listings Body lengths specified exclude joint; inlet tube extends to approximately 25 mm from bottom Body o.d. x length, inlet tube o.d. x length and…
-
SYNTHWARE Vacuum Traps, Spherical Joints
Kemtech AmericaVacuum Trap Kit with Spherical Joints. Includes trap body, top adapter, middle adapter, bottom adapter, and clamps. Body OD: 50mm, Body Length: 360mm
-
Vacuum Trap
Ace GlassUsed for freezing out undesired vapors in the vacuum system and also for use in conjunction with Dewar flasks.
-
Dry Ice Trap, Twin
Ace GlassTwin chambered dry ice condenser-trap similar to 8748 except dry ice finger condensers in this unit are NOT removable. Ports at top for connecting to Rotary Evaporator and to vacuum source are 3/8" O.D. Condensate stopcock at bottom is 4mm PTFE, 90 degree bore, that allows draining each chamber…