Traps

Compare Tool

Select up to 3 products

1 - 32 of 60
Sort
View
Show
  • Adapter Vacuum ST 24/40

    DWK Life Sciences (Kimble)

    Vertical adapter with vacuum take-off and drip tip.

  • Trap, Rotary Evaporator, Anti-Climb

    Ace Glass

    Upper tubulation prevents migration of film and foam directly into the condenser.

  • SYNTHWARE Vacuum Trap

    Kemtech America

    For use with vacuum manifolds having 35/20 socket joints. Please order the pump adapter and socket clamp separately.

  • SYNTHWARE Vacuum Traps, Hose Connections

    Kemtech America

    Vacuum Trap, Hose Connections Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.

  • SYNTHWARE Vacuum Trap with #15 O-Ring Joint

    Kemtech America

    Vacuum Trap Body Joint: 45/50 O-ring Joint Size: #15 Outer Body OD: 50mm Outer Body Length: 250mm below joint supplied with two size 116 Viton O-rings

  • Dry Ice Condenser / Trap, with Reservoir

    Ace Glass

    Trap,dry ice condenser,glass hose connections,PTFE stopcock bottom.

  • High Vacuum System Trap

    Ace Glass

    Vacuum trap system protects gauge heads, like our 14034, and pumps from corrosive vapors and particle fouling. System consists of a Dewar flask, cold trap and inlet arm. High-vacuum stopcocks are used throughout. Gauge & inlet arm are Ace-Thred connections. Pump & manifold connections are o-ring joints.

  • Adapter, Distilling Trap

    Ace Glass

    Distilling trap adapter with outer joint top and inner joint bottom

  • Trap, Rotary Evaporator, Anti-Splash

    Ace Glass

    Bump trap for use between the rotary evaporator's steam tube and evaporator flask, preventing fluid from being drawn into the condenser.

  • Two-Piece Vacuum Traps with Hose Connection

    Wilmad LabGlass

    These borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.

  • Tekmar Fritless Sparger

    Chromatography Research Supplies

    Precision ground heavy wall tubing Remarkable piece-to-piece consistency Glassware is designed for Tekmar instruments. Made by a special fixture-based process which affords piece-to-piece consistency. Tops are fire-polished for smoothness. Kits include sparger, replacement stainless steel…

  • Fritted Bump Trap for a Rotary Evaporator

    DWK Life Sciences (Kimble)

    This trap has a 40-60 micron porosity fritted disc sealed between the lower inner and top outer joint to prevent the contents of the flask from entering into the condenser in the event of bumping. All traps have a Standard Taper 24/40 top outer joint Manufactured from 33 expansion, low…

  • Trap, Rotary Evaporator, Elliptical

    Ace Glass

    Space saving, Elliptical shaped, bump trap. For use in Rotary Evaps between the steam tube and the evaporator flask. Prevents fluid from being drawn into the condenser. Shape allows for the same effect as standard traps but with less space between the flask and evaporator tube. This allows for use…

  • Vacuum Trap with Serrated Hose Connections

    Ace Glass

    Same as 8751 except with six ring hose connections on inlet and outlet tubes. O.D. of smallest ring is 14mm; largest is 16mm.

  • SYNTHWARE Dewar Type Vacuum Traps

    Kemtech America

    Vacuum Trap, Dewar Type Capacity: 250, 500, and 1000mL available Stopcock: Glass or Teflon Options available Stopcock Bore: 4mm

  • SYNTHWARE Two-Piece Vacuum Trap with #15 O-Ring Joint

    Kemtech America

    Vacuum Trap with #15 O-ring joint Features 0-12mm high vaccum valve as the shut off. Connection is made via a 57mm O-ring flat flange. Length below flange is 300mm. Steel Clamps sold seperately.

  • Adapter Valve No.15 O-Ring Joints

    Ace Glass

    Borosilicate glass valve adapter with various Hi-Vac valve sizes and (2) No.15 O-Ring joints. Ideal for assembling Schlenk or vacuum lines Comes with (2) size -116 FETFE O-Rings.

  • Dry Ice Trap

    Ace Glass

    With a 24/40 joint at the bottom. Inside diameter of coolant section is 50mm and length is approximately 250mm. O.D. of inlet and outlet is 22mm. Available modified with #15 Ace-Thred inlet/outlet for use with Ace-Safe tubing connectors.

  • Freezing Section, 29/42

    Thomas®

    Prevents corrosion by acid and alkaline vapors, moisture, etc., entrained during evacuation of distilling apparatus, vacuum desiccators, etc. Freezing trap, when immersed in suitable freezing mixture, removes condensable vapors, gauge liquid or other foreign material accidentally introduced…

  • Vacuum Trap

    Ace Glass

    Same as 8750 except top is bent in line with side tube.,/p>

  • Dry Ice Trap, Twin

    Ace Glass

    Twin chambered dry ice condenser-trap similar to 8748 except dry ice finger condensers in this unit are NOT removable. Ports at top for connecting to Rotary Evaporator and to vacuum source are 3/8" O.D. Condensate stopcock at bottom is 4mm PTFE, 90 degree bore, that allows draining each chamber…

  • Vacuum Trap, O-Ring Flange Connection

    Ace Glass

    Vacuum trap assembly with o-ring flange connection. This design has flexibility and ease of assembly-disassembly for cleaning. Comes with Viton o-ring and stainless steel pinch clamp.

  • Buchi Assembly CR, Replacement Rotary Evap Glassware

    Ace Glass

    Replacement glassware for Buchi rotary evaporators. Available with either a plain or safety coated outer trap. Outer trap bodies, codes -01 and -03 do not include a plug. Order separately 1 each 13295-10.

  • Vacuum Traps, Threaded

    Ace Glass

    Round bottom with adjustable inner tube and Nylon bushing with FETFE O-Ring. Optional threaded adapters (8746-75 and -78) will allow safe and easy tubing connect-disconnect. Simply attach tubing to serrated end of adapter, then connect adapter via 7506 bushing to inlet and outlet of trap. Serrated…

  • Two-Piece Vacuum Traps with Straight Top Stem

    Wilmad LabGlass

    Made of borosilicate glass, these vacuum traps consist of two pieces with a straight top stem. Both inlet and outlet stems are integral with the stopper. Body and stopper are connected by a full length Standard Taper joint.

  • Trap, Rotary Evaporator, Anti-Splash, Improved

    Ace Glass

    Bump trap for use between a rotary evaporator's steam tube and evaporator flask, preventing fluid from being drawn into the condenser. Improved design incorporates two drain holes to expedite the return of solvent to the evaporator flask.

  • Purge/Trap A

    MilliporeSigma

    Synonym: PURGE TRAP A, O.I. ANALYTICAL 4560

  • Sparger Fritted 25ml 1/2"

    DWK Life Sciences (Kimble)

    These U-shaped spargers are specially designed for use with Teledyne Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers. 25 mL Fritted Sparger (2000/3000) with 3/4" mount Fritted spargers are recommended for potable water and wastewater samples…

  • SYNTHWARE Micro Dewar Vacuum Traps

    Kemtech America

    Vacuum Trap, Dewar, Micro Reservoir Capacity: 100mL Stopcock: Glass or Teflon options available 2mm Stopcock Bore

  • Dry Ice Condenser-Trap, with Ace-Threds

    Ace Glass

    Twin chambered dry ice condenser-trap,for Rotary Evaporator use. Squatty design 18"high, two chambers. Dry ice fingers secured in main body via #50 Ace-Thred, bushings, and O-Rings allowing for easy cleaning. Two ports at top of chamber are 3/8" O.D. (for connecting to evaporator & vacuum source).…

  • Purge/Trap K Vocarb® 3000

    MilliporeSigma

    Synonym: PURGE TRAP K, O.I. ANALYTICAL 4560

  • Vacuum Trap

    Ace Glass

    With both arms in vertical position. 60mm O.D. x 250mm long. Side arms are 12mm O.D. Available with or without serrated connections on arms. Serrated connectors have six rings: the smallest, 14mm O.D.; largest, 16mm O.D.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.