Sample Holder 3 x 13 mm

Combining two different requirements into one cell allows a myriad of different sampling applications. Two cells in one- Demountable and Sealed Cell. Easily disassembled for cleaning. For Liquid Samples: After assembling the cell, you can introduce the liquid sample through injection ports that…

The PerkinElmer 100 gram elemental analysis reagent comes in a crystalline powder form and is mainly used in laboratory and manufacturing factories.

The PerkinElmer shoulder screw measuring 0.24 Inch OD x 1.5 Inch is helpful for fastening applications and the stainless steel construction offers more strength and durability.

Horse Power: 1.5 Hp Output CFM/Output L.: 6.0 CFM/170 L. Min Max Pressure PSI/Max Pressure Bar: 120 PSI/8 bar Noise Level: 72 dB/A, with Enclosure 55 dB/A Tank Size Gal./Tank Size L: 13 Gallons/50 Liters Dimensions: 25 x 18 x 29 / with Enclosure 29 x 23 x 32 Weight: 97 Lbs. / with…

The PerkinElmer detector flow cell is designed to use with 200 Series and helps in the smooth transfer of sample liquids inside the beam path.

Fused quartz has been chosen because of its very high purity and low thermal expansion rate. Because we care about your safety, all combustion tubes are pressure-tested to eliminate any tubes which might contain weak spots. In addition, stringent specifications are used to insure that the…

Wire Form Copper Plus is a reagent intended for use with 2400 CHNS/O Elemental Analyzer.

Sipper Install Kit - L650/850/950

The kIt includes: 2- 6 ft. lengths of 1/8 in. i. d. copper tubing with 1/8 in. Swagelok fittings at each end 2- 1/8 to1/4 in. fittings (09903087) 2- 1/8 to 1/8 in. fittings(09903434), and 1-roll of PTFE ® tape.

A complete High Sensitivity plastic body nebulizer with Pt/Ir capillary and Viton o-rings. This nebulizer is fabricated of inert plastic materials for maximum performance and corrosion resistance. It's compatible with the PerkinElmer AAnalyst 200/400/700*/800* AA instruments. Note: The AAnalyst…

Includes one of 09902207, one of 09902155, two of 09902247, and two of 09921028. Package of 6.

The PSS Injector Starter Kit (N6120102) includes: universal connectors (5), 0.53 mm i.d. deactivated fused-silica (5 m), 2 mm i.d. quartz liner, 1 mm i.d. quartz liner, glass hourglass liner, 1/16 in. stainless steel nuts (5), 0.5 mm i.d. graphite ferrules (10), 0.8 mm i.d. graphite ferrules (10),…

Helping to prevent salt build-up inside the sample introduction system, the Argon Humidifier allows uninterrupted and maintenance-free operation. The Argon Humidifier combines ease of operation, high performance and safety. For use with Optima 2x00/4x00/5x00/7x00/8x00.

Notice: Local electrical codes do not permit PerkinElmer Service Engineers to install the blower and vent assembly.

Cell-40mm Pair Rectangular. Quartz.

The PerkinElmer replacement absorption cell body measuring 4 mm Dia x 260 mm L is compatible to use with flow injection mercury systems.

The best way to assure consistent, accurate results from your Organic Elemental Analyzer is to use only the highestgrade of reagents. Our scientists select the purest raw materials, condition them,then test them on PerkinElmer analyzers.

A complete stainless steel body nebulizer with stainless steel capillary and Kalrez o-rings. Recommended for use with aqueous or organic solutions. This nebulizer is compatible with the PinAAcle 500 and 900F/H/T AA instruments.

This two-stage regulator has a brass body and stainless steel diaphragm and guarantees constant delivery pressure regardless of variations in cylinder pressure. Maximum inlet pressure is 3000psi, and the CGA fitting size is 580. A Swagelok™ 1/4in npt to 1/8in fitting (P/N 09903471) is included.…

Consists of two filter wheels, each with horizontal and vertical polarizing films installed. The excitation and emission polarizer positions are software-controlled and can be independently set or automatically calculated for polarization, anisotropy or G-factor. Requires, but does not include,…

Part of burner head O-ring kit 09902219. Qty. 1

The Quick Release Nut available from PerkinElmer is a part required for the assembly of the Semi-Demountable Cell.

The PerkinElmer prep flow cell assembly with a volume capacity of 1.7 uL measures 3 mm and the prep construction offers good strength.

PerkinElmer carries a wide selection of genuine supplies and accessories for your FIMS-100, FIMS-400, FIAS-100 or FIAS-400. Keeping your system in good working order by using only the best replacement parts is the first step in assuring quality analytical performance. Regular maintenance and/or…

Tare Weight Set

Al-Pans-Set

The photometric accuracy of spectrophotometers is limited by detector non-linearity errors. These errors can be reduced by use of the double aperture accessory, which allows non-linearity to be characterized and corrected for. Typical applications include specular reflectance measurements on very…

Valve-LC System Manual INJ (ST)

Therange includes Cylindrical Cells, Rectangular Cells, Semi-MicroCells and Micro Cells. These cells are suitable for use with allPerkinElmer NIR Spectrometers, including Spectrum™ andParagon™ IdentiCheck™ FTNIR Systems.

Cell W.Lid, Quartz 40/45mm (9302705) Pk/2

The PC 3 is a small, robust Peltier cooled cyclonic spray chamber. The PC 3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC 3 spray chamber enhance long-term signal stability, reduce…