Tools

Compare Tool

Select up to 3 products

1 - 32 of 1579
Sort
View
Show
  • General Surgery Kit

    Miltex®, an Integra company

    Kit includes: Quantity Description 1 Mayo Scissors, Straight, 6-3/4" (17.1 cm) 1 #3 Scalpel Handle 1 Snook Hook, 8" (20.3 cm) 3 Mosquito Forceps, Curved, 5" (12.7 cm) …

  • Diamond Tip Scribers, Retractable Scriber

    Electron Microscopy Sciences

    High quality chrome pen that features appearance as well as utility. The diamond is mounted in a stainless steel tip and refills are available. The tip is finished at a 60º angle.

  • Instant Read-out Precision Digital Caliper

    Electron Microscopy Sciences

    Caliper is made from stainless steel and measures inside and outside in inches and millimeters. Read-out from 0 to 6 inches with 0.001" resolution, or 0 to 150 mm with 0.01mm resolution. Includes a zero set button, depth measuring rod and a fine adjustment thumb wheel. Protective carrying…

  • Curved Forceps

    Electron Microscopy Sciences

    6" (152mm), Stainless Steel, Medium fine tips, curved smooth points.  

  • Dumont Tweezers Set

    Electron Microscopy Sciences

    Dumont Tweezers Set Made from lightweight plastic and padded with protective foam inside, this tweezers storage box offers you the safe place to store your delicate and valuable tweezers, but keeps them at your reach when you need them. Set of 7 DUMONT Dumoxel/Biology quality tweezers,…

  • General Purpose Optical Bench (GPOB)

    PerkinElmer

    General Purpose Optical Bench (GPOB)

  • Diamond Tip Scribers, Straight Head

    Electron Microscopy Sciences

    Sturdy scribers are in wide use throughout the laboratory. It leaves a permanent marking on virtually any surface, including metal, glass, or plastic. Each Scriber features a hexagonal aluminum pencil shaped body, mill finish, natural diamond tip and protective cap. Different styles are…

  • Emery Paper

    Electron Microscopy Sciences

    Sheets come in size 9"x133/4" (22x34cm) in varying grit sizes. Grit 4/0 is the finest and 3 is the coarsest.

  • Helium or Argon Gas Regulator

    PerkinElmer

    This two-stage regulator has a brass body and stainless steel diaphragm and guarantees constant delivery pressure regardless of variations in cylinder pressure. Maximum inlet pressure is 3000psi, and the CGA fitting size is 580. A Swagelok™ 1/4in npt to 1/8in fitting (P/N 09903471) is included.…

  • Glass Tubing Cutter

    Humboldt

    Made of nickel-plated zinc alloy, with hardened steel cutting wheels Spring-loaded, to remain open until used For tubes up to 38 mm diameter

  • Nitrogen Generator 30 liter Per Minute 120 Volt

    PerkinElmer

    Five models operate at flow rates from 15 L/min to 50 L/min. The LCMS generators provide a continuous stream of high purity nitrogen from a single ‘plug play’ unit. Models are available with and without an integral oil free compressor, are extremely quiet in operation and are fully approved for use…

  • Quartz Control Plate -1 at 589 nm

    PerkinElmer

    Thermostattable housing, nominal rotation -1 to 589 nm (NaD).

  • Soldering Irons

    Specialized Products Co

    Industrial grade Temperature: 750° F Features rugged stainless steel barrel construction and long-life, double-coated tips. Irons have pencil styling with light blue handles. Models 9396A25 and A28 are 25 watt units with 1/16" ST tips. Model 9396A31 is a 35 watt unit with a screwdriver ST…

  • Lab Tools Kit

    United Scientific Supplies

    An assortment of the most commonly used lab tools available as one convenient set. Contains one each of the following: Test tube brush, spatula, crucible tongs, test tube clamp, lab scoop, and forceps.

  • Glass Tubing Cutter

    Humboldt

    Attaches to laboratory table tops up to 1-3/4" (45mm) thick. Cuts glass tubing up to 1-1/2" (38mm) diameter. Aluminum alloy casting with gray hammerloid finish. Hardened steel cutting wheel.

  • Helium/Nitrogen Pressure Regulator

    PerkinElmer

    Two-stage regulator for precise outlet pressure control. Brass body and stainless steel diaphragm for long life and minimum maintenance. Maximum inlet pressure of20,700 KPa. Supplied with CGA-580adapter. Approximate weight: 1.3 Kg.

  • Digimatic Calipers – 6" Long

    Electron Microscopy Sciences

    Provides a digital readout to 0.0005" / 0.01mm for error-free reading and can measure steps. Function: zero setting, data hold, low battery alarm and data output. Provided with a data saving output port for connection with the SPC system. Powered by a single SR-44 battery. Battery…

  • Grease Testing Penetration Needles

    Humboldt

    Grease-testing penetrometers; ASTM D217, D937. ASA Std. Z11.3.

  • Mall Probe

    Electron Microscopy Sciences

    6" long, Chrome plated with one blunt bent end and hexagonal shape handle.

  • Inoculating Loop/Needle

    Electron Microscopy Sciences

    Nichrome wire. An 8" aluminum handle with a 3" nichrome wire, 25 gauge. Loop outside diameter is 4mm. Loop inside diameter is 2.5mm. Available with a loop or a needle.

  • AA Ultra Quiet Oil-Less Air Compressor Micron Dryer Filter Element

    PerkinElmer

    With the addition of a water separator with a 5 micron particle filter, no liquid transfers into the air supply, providing you with contaminant free air. Each quiet, vibration free compressor comes standard with an internally and externally coated air tank with top drain. The AA Ultra Quiet…

  • Vernier Caliper

    GSC International, Inc.

    Precise Caliper with roller adjustment and locking screw. Double scale graduations in both metric and English, 120mm x 1mm and 5" x 1/16".

  • Fiber Tip Tweezers, Style 269

    Electron Microscopy Sciences

    The handles are made from Antimagnetic Steel and Tips from Synthetic Fiber. Temperature Resistance: 375°F (190°C). Synthetic Fiber: High-performance Plastic type CP - PEEK/CF30 (Polyetheretherketone reinforced with 30 wt% carbon fiber) Very hard, high tensile and flexural…

  • Weldin Periodontal Instrument Kit

    Miltex®, an Integra company

    Kit includes: Quantity Description 1 Griplite® S6 Mirror Handle 1 #3 Cone Socket Front Surface Mirror* 1 #4 Cone Socket Front Surface Mirror* 1 Griplite® S6 #23 Explorer Probe 1 …

  • Force Calibration Weight, 50 g.

    PerkinElmer

    Force Calibration Weight, 50 g.

  • Rubis Standard SA Steel Tweezers, Style 3M

    Electron Microscopy Sciences

    Rubis Steel, Plastic, and Wafer Tweezers High-Tech Tweezers for Laboratory Requirements EMS is Proud to represent Rubis Innovations from Rubis with a clear focus on cutting-edge laboratory instruments Evolution is what the Rubis development engineers call it when they harmonize…

  • Brass Deflagration Spoon

    Humboldt

    Capable of handling intense temperatures, this unit is the ideal instrument for dipping, with a 16" (406mm) long handle and 3/4" (19mm) bowl.

  • Kelly Forceps

    Electron Microscopy Sciences

    Stainless steel hemostatic forceps with box lock joint and serrated jaw.

  • Stainless Steel Forceps - Serrated Tips

    Electron Microscopy Sciences

    Made from stainless steel, medium points, serrated tips and alignment pin, curved or straight tips. Available in 4" and 6" long. Only curved type A tips comes with locking device.

  • Purge/Trap K Vocarb® 3000

    MilliporeSigma

    Configured for Tekmar Stratum.

  • 1/8in Degassing Tefzel Nut

    PerkinElmer

    1/8in Degassing Tefzel Nut

  • Dumont Medical Tweezers, Style 2

    Electron Microscopy Sciences

    Dumont Tweezers Dumont produces high quality handmade tweezers, and has gained the popularity of all researchers over the years Developed in 1875 by Arnold Dumont in La Sagne, Switzerland. There is a variety of material which is used to make Dumont tweezers, is shown below: …

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.