Hamilton Chromatography Syringes
-
Teflon ® PTFE tipped plungers Replaceable barrels, plungers and tips Cemented or removable needles For use with liquids or gases. Features a precision-machined Teflon plunger tip which, when wetted, forms an interference fit with the inner diameter of the glass barrel to achieve the seal…
-
Shimadzu AOC-9 Syringes
HamiltonHamilton offers a wide variety of syringes specifically designed for Shimadzu autosamplers that require 43 mm needle lengths as well as standard 51 mm lengths.
-
1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…
-
Shimadzu SIL-6A Syringes
HamiltonThe most commonly used site for intramuscular injection is the thigh muscle. Quadriceps, rather than posterior thigh muscles, should be used for injection of irritating substances or larger volumes. [1] The products below are a selection of recommended small volume syringes and small gauge needles…
-
1750 Hitachi Syringe
HamiltonThe LaChrom Elite Autosampler represents a new standard of performance in HPLC. Whether you need high sample capacity, extreme precision, ultra-low carry over, or rapid cycle times between injections, the LaChrom Elite models excel.
-
Shimadzu AOC-14, 17 and 20 Syringes
HamiltonSample introduction is a key aspect of any chromatographic system. The AOC-20i is able to inject samples into a variety of injection ports, as well as product reproducible results with a minimum of problems. The challenge in today’s laboratory is processing large sample numbers and various…
-
Hamilton introduces a new headspace syringe featuring a unique Glue-Free (GF) needle attachment in combination with the well-known High Dynamic (HD) plunger designed specifically for PAL COMBI-xt Headspace Autosamplers. Hamilton's solution: Glue-Free needle attachment is chemically…
-
Digital Syringes
HamiltonThe most accurate manually operated syringes available Consistent plunger position LCD NIST Traceable Ergonomically designed syringes have a fine adjustment thumbwheel for easy volume control. Plunger drag adjustment optimizes the rate of plunger movement to the…
-
Removable needles Length: 1.71” HP point style See 8928C19 series for replacement needle kits.
-
Removable needles Length: 2.756” Point style: 3 Replacement needles available on special order.
-
Superior design and materials result in an 8-fold increase in syringe life Economically designed to give true value at an affordable price Strictly machined tolerances for reproducible results from injection-to-injection Inert polytetrafluoroethylene (PTFE), GASTIGHT® plunger tip …
-
1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…
-
The 800 series syringes are the reinforced plunger version of the original Hamilton 700 Series syringes. Attached to the flange of the syringe is a blue syringe holder. The syringe holder provides a spot to hold the syringe that will not heat up the barrel causing dispense inaccuracies.…
-
C-Line Syringes for CTC Autosamplers
HamiltonImprove operation and functionality Available for all GC and HPLC PAL Instruments Innovative cemented needle design making a more inert fluid path Inert plunger tip material that provides longer life and chemical resistance Ensure proper installation with color-coded needle gauge indicator and…
-
Syringes
HamiltonThe Hamilton 700 series 100 uL syringe is suitable for use with small removable needles. This syringe model offers SST and borosilicate glass fluid path. It can be used at a pressure rating of up to 2000 psig and temperature rating of up to 10 to 115 degree F.
-
Length: 2” Point style: 3 For use with Rheodyne, Valco™ VISF-2, Beckman®/Altex and SSI injection valves. Syringes are available with cemented or removable needles and feature Teflon® PTFE-tipped plungers. Barrel, plunger and plunger tip are replaceable. See…
-
GC On-Column Syringes
HamiltonRemovable needles Fused silica needle Length: 100 mm (8928C59: 115 mm); Point style: 3. Syringes 8928C65 to C68 and C77 to C83 are gas-tight.
-
1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1μL up to 500μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…
-
1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…
-
Bruker Varian 8100 and 8200 Syringes
HamiltonFor Varian 8034 Length: 2” Point style: 2 See 8928C40 for replacement needles. For Varian 8100/8200 Length: 1.99” Point style: 5 See 8928C47 for replacement needles.
-
1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…
-
1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…
-
Microlab 500 Replacement Parts
HamiltonThe Hamilton 18 gauge dispense tubing with M6 fitting is 6 Feet long and is suitable for use with Microlab 500 diluter/dispenser system.
-
Reinforced plungers Cemented or removable needles Economical Similar to 800 series syringes, except these lower-cost syringes do not have adjustable plunger friction or a plunger stop. Order 8929F64 for replacement needle for removable needle syringes.
-
This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. The 1700 series syringes are the GASTIGHT version of the original 700 series syringes. A variety of different terminations and needle options are available in this series.
-
CTC / LEAP PAL GC Syringes
HamiltonS-Line Syringes S-Line syringes are the cost-effective choice for CTC PAL autosampler applications. S-Line syringes deliver great performance in everyday use for GC injections at an exceptional value. Fast injection speeds in GC analyses put considerable stress on syringe plungers and,…
-
The 1000 series syringe is a mid-volume Gastight syringe. Gastight syringes are ideal for dispensing both liquids and gases. They have a precision-machined polymer plunger tip, often PTFE, which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe…
-
600 Series Microliter Syringes
HamiltonHamilton's '600 Series' syringes are a rugged, durable, and long lasting half stroke version of Hamilton’s original 700 series syringes. They have a reinforced plunger which prevents plunger bending. Each plunger is individually fitted to the glass barrel and cannot be…
-
Cemented needles on 8928B58-64 Removable needles on 8928B67 Length: 2” Point style: 2 See 8928C40 for needle for 8928B67.
-
1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…
-
Gastight syringes for injection of Gas and Liquid Samples. Removable Needle (RN), (point style 2) Autoclavable needles are 51 mm 22s gauge
-
Purge & Trap Syringes
HamiltonDesigned for the analysis of drinking water samples according to EPA purge and trap concentration techniques Easy-to-remove syringe plunger for loading water samples into syringe barrel. Internal standard or surrogate sample can be added directly through twist valve.