1700 series, gastight syringes with cemented needles. Length: 1.71 23s-26s gauge AS Point Style

1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…

S-Line Syringes S-Line syringes are the cost-effective choice for CTC PAL autosampler applications.  S-Line syringes deliver great performance in everyday use for GC injections at an exceptional value. Fast injection speeds in GC analyses put considerable stress on syringe plungers and,…

Cemented needles on 8928B58-64 Removable needles on 8928B67 Length: 2” Point style: 2 See 8928C40 for needle for 8928B67.

Gastight syringes for injection of Gas and Liquid Samples. Removable Needle (RN), (point style 2) Autoclavable needles are 51 mm 22s gauge

Removable needles Length: 2.756” Point style: 3 Replacement needles available on special order.

7000 Series Modified Microliter® Removable needles Replaceable barrels and parts No dead volume Positive displacement syringe for use with liquids. A tungsten plunger wire travels inside the needle, eliminating dead volume. Knurled hubs are used exclusively on the 7000…

1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1μL up to 500μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…

OilExpress ™ 4 system delivers highly automated, rapid, reliable oil condition monitoring results using recognized industry standard protocols such as ASTM ® , JOAP and Caterpillar ® S•O•S ? . We offer a range of solutions for fast and accurate IR analysis of in-service lubricants based on the…

10mL Gas Tight Syringe with Removable Needle

This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. The 1700 series syringes are the GASTIGHT version of the original 700 series syringes. A variety of different terminations and needle options are available in this series.

SGE syringes have consistently been the choice of GC and LC equipment manufacturers for many years. They choose our products because their reputation depends on the performance of our components. Our knowledge and expertise in liquid handling technologies has enabled us to design syringes for a…

NIST Traceable For use with gasses Fixed, removable or Luer Lock needles Similar to 8929R01 series but in larger sizes. Luer Lock needles sold separately, see 8930D70 series.

Each plunger is individually fitted for each microsyringe for perfect sealing. Accuracy and Reproducibility: ±1% Borosilicate Glass Barrel OD: 8mm Scale Length: 60mm

NIST Traceable Removable Needles Designed for Manual GC Injection Capable of injecting as little as 0.01 µL with accuracy and reproducibility of less than ±1%. The plunger extends to the tip of the needle, displacing the full sample during injection. This means the…

Hamilton offers a wide variety of syringes specifically designed for Shimadzu autosamplers that require 43 mm needle lengths as well as standard 51 mm lengths.

Sample introduction is a key aspect of any chromatographic system. The AOC-20i is able to inject samples into a variety of injection ports, as well as product reproducible results with a minimum of problems. The challenge in today’s laboratory is processing large sample numbers and various…

For Varian 8034 Length: 2” Point style: 2 See 8928C40 for replacement needles. For Varian 8100/8200 Length: 1.99” Point style: 5 See 8928C47 for replacement needles.

Agilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. …

Agilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. …

Needle Styles Broad selection of syringes for manual and auto injection to provide accurate and effective sampling Tapered or straight needles Fixed Needle Syringe The epoxy-cemented, stainless steel needle is centered in the syringe barrel at the depth of the zero…

1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…

1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…

The LaChrom Elite Autosampler represents a new standard of performance in HPLC. Whether you need high sample capacity, extreme precision, ultra-low carry over, or rapid cycle times between injections, the LaChrom Elite models excel.

SGE syringes have consistently been the choice of GC and LC equipment manufacturers for many years. They choose our products because their reputation depends on the performance of our components. Our knowledge and expertise in liquid handling technologies has enabled us to design syringes for a…

Designed for the analysis of drinking water samples according to EPA purge and trap concentration techniques Easy-to-remove syringe plunger for loading water samples into syringe barrel. Internal standard or surrogate sample can be added directly through twist valve.

50 uL Sampling Syringe

Teflon ® PTFE tipped plungers Replaceable barrels, plungers and tips Cemented or removable needles For use with liquids or gases. Features a precision-machined Teflon plunger tip which, when wetted, forms an interference fit with the inner diameter of the glass barrel to achieve the seal…

Denomination specific color coded barrels Easy to read, vertical scales Wide variety of styles and sizes with needles for GC or LC Incorporated bench top storage Environmentally-friendly packaging Lot traceable with Certificate of Conformance Color Speaks Volumes! …

SGE syringes have consistently been the choice of GC and LC equipment manufacturers for many years. They choose our products because their reputation depends on the performance of our components. Our knowledge and expertise in liquid handling technologies has enabled us to design syringes for a…

Ideal for a variety of analyses, this single quadrupole detector brings the unsurpassed sample insight of mass spectrometry to liquid chromatography applications. The Flexar SQ 300 MS™ is an integral part of the powerful and exible Flexar LC product line. It features a revolutionary interchangeable…

EasyLOK Fittings EasyLOK fittings are composed of a knurled stainless steel nut and a double ended PEEK™ ferrule. The PEEK™ ferrule simply slides over any 1/16" OD tubing to its required position, while the nut is finger tightened. Unlike stainless steel, the PEEK™…