Stoppers

Compare Tool

Select up to 3 products

1 - 32 of 145
Sort
View
Show
  • One-Hole Rubber Stoppers

    Plasticoid

    Size No. 000, 00 and 0 have hole 3 mm diameter; sizes No. 1 and 2 have hole 4 mm in diameter; all other sizes have hole 5 mm in diameter.

  • Rubber Stoppers, One Hole

    Chemglass

    Similar to CG-3026 except with one hole. These stoppers are suitable for practically all general laboratory uses. Composition ensures resiliency and pliability over a long period and withstands laboratory conditions without hardening. The dimensions are in accordance with specifications established…

  • Solid Rubber Stoppers

    Plasticoid

    Standard Grade Size No. 000 is 18 mm long; sizes No. 00 to No. 13 are 25 mm long. Sizes No. 13 1/2, 14 and 15 are 35 mm, 36 mm and 39 mm respectively.

  • Sani-Tech® Silicone Stoppers

    Saint Gobain

    Sani-Tech® ultra-pure platinum-cured silicone stoppers outperform standard neoprene and rubber stoppers in critical laboratory and process applications. These long-life silicone stoppers are fully autoclavable and sterilizable and will not crack, spallate or invoke particle migrations that can…

  • Neoprene Rubber Stoppers

    Plasticoid

    Solid green Neoprene Withstands exposure to temperatures up to  120°C Usable with petroleum products, vegetable and mineral oils and fats which deteriorate natural rubber Standard length: 26 mm Increased functionality over rubber stoppers at elevated temperatures. Not recommended for…

  • Mity Plugs

    Jaece

    Cellulose Acetate plugs for all size test tubes and laboratory flasks. MITY Plugs are non-shedding, dense weave cellulose acetate E plugs for drosophila vials and bottles. Dense weaving offers a superior barrier to mite infestation. Allows for reduced food evaporation to keep food fresh…

  • No 8 Stopper, Silicone

    DWK Life Sciences (Wheaton)

    Silcone rubber stopper Makes the connection to a standard 1 liter Erlenmeyer-style filtration flask Size: No. 8 Case of 6

  • Solid Rubber Stoppers

    Chemglass

    These stoppers are suitable for practically all general laboratory uses. Composition ensures resiliency and pliability over a long period and withstands laboratory conditions without hardening. The dimensions are in accordance with specifications established by the N.B.S. and are low in free sulfur…

  • Assorted 2 Hole Rubber Stoppers

    GSC International, Inc.

    RS-2H-C 1 pound package of assorted 2 hole rubber stoppers. Sizes and quantities are as follows: Size 2: 3 each Size 3: 3 each Size 4: 3 each Size 5: 3 each Size 6: 3 each Size 7: 3 each Size 8: 3 each

  • #12 Silicone Rubber Stoppers

    DWK Life Sciences (Kimble)

    This rubber stopper is an accessory for Kimble 4L flasks 27060-4000, 27065-4000, and 27070-4000, as well as 90mm funnnel 953805-0090.

  • Twistit Convertible Stoppers

    Plasticoid

    Unique seal system allows use as solid or one-, two- or three-hold closures Simplifies stock room inventory Molded of soft, resilient, white natural rubber Seals vacuum-tested to 760 mm Hg Autoclavable, with good shelf life. Sizes #3 & #4 have two holes; #5 - #10 have the (3)…

  • 3-Leg Lyophilization Stoppers

    DWK Life Sciences (Wheaton)

    1233Z70: 3-leg design provides stability during lyophilization and resists cocking. Constructed of Gray Chlorobutyl/50 material and fit bottles with mouth 13 mm ID x 20 mm OD. 1224A82: 3-leg lyophilization stopper is made from gray chlorobutyl/55 and is used with Wheaton screw neck diagnostic…

  • NMR Stoppers

    Plasticoid

    Hollow plug to fit inside bottles, flasks, vials, or tubing with a sleeve to pull over neck to create a double seal .Septa area allows insertion of needle, with excellent re-sealing properties for air sensitive chemistry Standard Compounds include Red and White Natural Rubber, Gray Butyl on…

  • SYNTHWARE Septum Stoppers, Sleeve Type

    Kemtech America

    Sleeve Type Septum Stopper made from natural white rubber.

  • HDPE Stopper No 22

    Corning

    These blue and white No. 22 PYREX® stoppers are made from linear high-density polyethylene and have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects the neck in the event of accidental…

  • Septum Stoppers, Suba-Seal®

    Chemglass

    Suba-Seal® septa are a flanged stopper with a hollow plug and sleeve extension that folds down over the neck of the vessel. In addition to the pull over sleeve, Suba-Seal® stoppers have a series of annular serrations on the plug portion of the septa. Each of these serrations depress along…

  • KIMAX Brand Joint Stoppers

    DWK Life Sciences (Kimble)

    Borosilicate, with penny head Conforms to ASTM Standard E 675 Size Standard Taper 13 has solid plug; size Standard Taper 38 has recessed bottom Standard Taper designation indicates the approximate diameter of the ground zone at its widest (gauging) point.

  • Gray Chlorobutyl Straight-Sided Stoppers

    DWK Life Sciences (Kimble)

    These high quality gray chlorobutyl stoppers are used for research and pharmaceutical packaging applications. Universal gray chlorobutyl formulation passes Japanese, European and United States pharmacopeia testing for globally marketed pharmaceutical products Formulation contains no…

  • Stoppers

    Dynalon

    Stoppers - Test Tubes 11-12 MM (1211Z88) Product Dimensions (l x w x h) : 0x0.463x0.622in Natural Test Tube Stoppers. Low-Density Polyethylene, 11mm-12mm tubes. Single- position tight fitting stopper to fit disposable test tubes.  Stoppers - Test Tubes 16 MM (1211Z93) …

  • Stoppers, Lyophilization with Ultra Pure Formulation

    DWK Life Sciences (Wheaton)

    Ultra Pure Lyophilization Stoppers are made from a bromobutyl rubber compound containing the highest level of chemical purity. These stoppers demonstrate a very low level of moisture absorption and are ideal for most lyophilization applications. They are compatible with Water for Injection (WFI)…

  • Borosil® Solid Penny Head Glass Stoppers

    Borosil

    Borosil® Solid Penny Head Glass Stoppers are with Interchangeable Ground Joint and can be used with Volumetric Flask of 5645, 5647 families or for other suitable joints. Manufactured with low extractable quality grade USP Type I, 3.3 Borosilicate Glass confirming to ASTM E438 Class A…

  • Polyethylene Stoppers

    Chemglass

    Inexpensive, tapered stopper provides for a tight, leak-proof fit while the top ring permits the stopper to be easily removed. Stoppers are made of yellow Polyethylene

  • Stoppers, O-Rings, Airfree®, Schlenk

    Chemglass

    For use with the AF-0060 or AF-0061 manifolds or any Airfree® component with an o-ring as a closure. Supplied complete with one Viton O-Ring.

  • SYNTHWARE Septum, Stopper, Sleeve Type for NMR Tubes

    Kemtech America

    Sleeve Type Septum stopper made from natural white rubber for use with 5mm NMR tubes.

  • Plug-Type Rubber Sleeve Stoppers

    DWK Life Sciences (Kimble)

    Uses include outgassing NMR tubes, pressure venting or adding reactants via syringe. Hollow, plug-type stopper fits into the neck of the glassware apparatus Sleeve extension fits over the neck for a secure seal Diaphragm can be punctured with a syringe needle Series 774261 may be…

  • Glass Pennyhead Stoppers

    DWK Life Sciences (Kimble)

    Solid pennyhead stopper for volumetric flasks, centrifuge tubes, etc. Meets ASTM Standard E 694.

  • PYREX® Gas Washing Stopper with Extra Coarse Fritted Disc

    Corning

    These PYREX® gas washing Standard Taper stoppers are replacements for the 500mL gas washing bottles (No. 31760-500EC). Sidearm tubulations are 8mm O.D. A 40/50 Standard Taper stopper is used to seal the top to the base. This Standard Taper stopper incorporates a tube with a 20mm diameter extra…

  • SYNTHWARE Stopper with #15 O-Ring Joint

    Kemtech America

    Stopper, Cap Design, for #15 O-ring joint.

  • Tube, Test, Stoppered

    Ace Glass

    Test tube with interchangeable stopper; 24/40 stopper is hollow, other two solid.

  • SYNTHWARE Septum Stoppers, Sleeve Type

    Kemtech America

    Flanged type stopper with a hollow plud and sleeve extension that folds down over the neck of vessel, tubing, etc. The diaphragm can be punctured with a syringe needle, resealing after need is withdrawn.

  • Sleeves, PTFE

    Chemglass

    Reusable .005in thick PTFE sleeve for standard taper joints provides a grease-free seal.

  • Septum Stoppers, Sleeve Type

    Chemglass

    Sleeve type stoppers with a hollow plugs and sleeve extensions that folds down over the neck of a vessel, tubing, etc. The diaphragm can be punctured with a syringe needle, re-sealing after the needle is withdrawn. Available in either RED or WHITE rubber.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.