Chemglass Lab Glass Stopcocks
-
High Vacuum Single Oblique Stopcocks
ChemglassHollow plug, oblique bore stopcock is precision ground with corresponding numbers on barrel and plug. Lower vacuum chamber is evacuated via a separate hole in the plug which is not in the line of flow.
-
Exposed O-ring Tip Valves
ChemglassHi-vac valve with two sidearms sealed to the barrel at a 90° angle to one another. Designed with a precision external thread for fine control.
-
T-Bore PTFE Plug Stopcocks
ChemglassA 1:5 taper PTFE stopcock with three stems sealed 90º apart. PTFE plug has a "T" shaped bore to connect any two or all three stems.
-
Pressure Release Bubbler
ChemglassBUBBLERS, HIGH CAPACITY, CHECK VALVES, High capacity check valve bubbler keeps oil and air from being drawn into a reaction system when negative pressure is developed. Bubbler has two 1/2" swagelock type fittings on top permitting one side to be connected to the nitrogen source and one side to…
-
Glass Plug Straight Bore Stopcocks
ChemglassThe 2mm through 6mm bore sizes are supplied complete with the listed size metal retaining clip CG-423. The 8mm and 10mm bore sizes are supplied with a #29 and #34 CG-145 Keck clip respectively.
-
T-BORE, CAPILLARY ARMS, Similar to CG-436, but with all three arms being made of 2mm ID capillary tubing. 120°, A 1:5 taper PTFE stopcock with three sidearms sealed 120º apart. Plug has a bore to allow connection of any two arms at once.
-
Chem-Vac™ Hi-Vac Valves
ChemglassCHEM-VAC™ valve has single sidearm sealed at a 90º angle to the barrel. This inexpensive configuration allows for the lower portion of the barrel to be sealed directly to the apparatus being constructed, making for more compact, stronger assemblies. Valve has a TFE plug with three…
-
Exposed O-ring Tip Valves
ChemglassVALVES, IN-LINE, EXPOSED O-RING TIP, Hi-vac valve with bent arms to minimize hold up of fluids that would occur in conventional valves. Designed with a precision external thread for fine control. VALVES, 3-WAY, EXPOSED O-RING TIP, Hi-vac valve with three way configuration for use in construction…
-
Replacement one-piece stem and control knob for our NEW 0-14mm drain valve. Available with either a red indicator band used for high temperature applications up to 230°C, or with a blue indicator band used for low temperature applications down to -60°C. The high temperature plug…
-
Chem-Vac™ Glass Portion Only 90° Valves
ChemglassCHEM-VAC™ valve glass portion only. Valve has two sidearms sealed to the barrel at a 90º angle to one another. Heavy duty rounded coarse thread and precision formed tapered seat. Dimensions as listed. PLEASE NOTE: THE 0-20mm BORE SIZE IS OUR PREVIOUS STYLE CG-500 SERIES VALVE…
-
High Vacuum Double Oblique Stopcocks
ChemglassHollow plug, double oblique bore stopcock is precision ground with corresponding numbers on barrel and plug. Lower vacuum chamber is evacuated with a separate hole in the plug which is not in the line of flow.
-
Organic Chemistry Labset Kit
ChemglassORGANIC CHEMISTRY LABSET KITS, 19/22, Chemglass organic chemistry kits contain the basic glassware required to perform basic experiments such as vacuum or atmospheric distillation, reflux or reflux with addition, extraction as well as other organic experiments. Each kit contains the 14 glass items…
-
High Vacuum Straight Bore Stopcocks
ChemglassHollow plug, straight bore stopcock is precision ground and hand-lapped with corresponding numbers on barrel and plug. They are supplied complete with the listed size CG-423 metal retaining clip.
-
Solid glass plug has a threaded glass snelling which accepts an assembly similar to the one supplied with standard PTFE stopcocks. This consists of a PTFE washer, PTFE nut and Viton O-ring. Assembly provides for uniform seating tension to be applied to the plug which is precision ground and…
-
High Vacuum 90° 4mm Stopcock
ChemglassSimilar to CG-476, but with the sidearms sealed at a 90º angle to each other. Precision ground and hand-lapped with corresponding numbers on barrel and plug.
-
A 1:5 taper PTFE plug having a threaded needle valve to allow the adjustment of flow through the bore of the plug.
-
CHEM-VAC™ valve glass portion only. Valve has two sidearms sealed to the barrel at a 180º angle to one another and bent to minimize hold up of fluids. Heavy duty rounded coarse thread and precision formed tapered seat.
-
Similar to CG-446, but with the top oblique stem being made of 2mm ID capillary tubing.
-
Chem-Vac™ Glass Portion Only Valves
ChemglassCHEM-VAC™ valve glass portion only. Valve has a single sidearm sealed at a 90º angle to the barrel. Heavy duty rounded coarse thread and precision formed tapered seat. Dimensions as listed. PLEASE NOTE: THE 0-20mm BORE SIZE IS OUR PREVIOUS STYLE CG-500 SERIES VALVE WITH COARSE THREAD.
-
CHEM-CAP, METERING, LOW HOLD UP, CHEM-VAC™ CHEM-CAP® metering valve has an extended tip on the plug to allow semi-needle valve control of gases and liquids. Similar to CG-965 CHEM-VAC™ valve but with the arms bent to minimize hold-up of fluids. See CG-971 for replacement…
-
High Vacuum Single Oblique Stopcock
ChemglassSolid plug, oblique bore stopcock is precision ground with corresponding numbers on barrel and plug. Lower vacuum chamber is evacuated with a separate hole in the plug which is not in the line of flow.
-
Straight Bore Glass Plug Stopcocks
ChemglassSTOPCOCKS, STRAIGHT BORE, GLASS PLUGS, CAPILLARY ARMS, Similar to CG-400, but with the sidearms being made of capillary tubing having the same bore as the plug. Supplied complete with metal retaining clip CG-423. STOPCOCKS, STRAIGHT BORE, SCHLENK, GLASS PLUGS, This stopcock is especially…
-
Straight Bore 1-Arm Capillary Stopcocks
Chemglass1-ARM CAPILLARY Similar to CG-424, but with one arm being made of 2mm ID capillary tubing. CAPILLARY ARMS Similar to CG-424, but with both arms being made of 2mm ID capillary tubing.
-
PTFE Valves
ChemglassVALVES, IN-LINE, PTFE TIP, Hi-vac valve with bent arms to minimize hold up of fluids that would occur in conventional valves. Designed with a precision external thread for fine control. VALVES, 3-WAY, PTFE TIP, Hi-vac valve with three way configuration for use in construction of manifolds,…
-
S-Type Exposed O-ring Tip Valves
ChemglassHi-vac valve with two sidearms sealed to the barrel at a 180° angle to one another and on the same plane.
-
Chem-Vac™ Glass Portion Only 180° Valves
ChemglassCHEM-VAC™ valve glass portion only. Valve has two sidearms sealed to the barrel at a 180º angle to one another and on the same plane. Heavy duty rounded coarse thread and precision formed tapered seat.
-
High Vacuum Straight Bore Stopcocks
ChemglassSolid glass high vacuum stopcock with the NEW Chemglass improved constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all…
-
Stopcocks
ChemglassFor replacement or construction of burets having a 1:5 PTFE stopcock plug. One arm is pulled to a delivery tip.
-
-
High Vacuum T-Bore Stopcocks
ChemglassSolid glass high vacuum stopcock with the NEW Chemglass improved constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all…
-
T-Bore Glass Plug Pressure Stopcocks
ChemglassT-BORE, Similar to CG-458, but with three stems sealed 90º apart. Solid glass plug has a "T" shaped bore so that any two or all three arms can be connected at one time. Plug is precision ground and hand-lapped with corresponding numbers on the barrel and plug. DOUBLE OBLIQUE BORE,…
-
High Vacuum T-Type 4mm Stopcock
ChemglassSimilar to CG-478, but with the addition of an extra horizontal sidearm. Precision ground and hand-lapped with corresponding numbers on barrel and plug.