Material: 316l stainless steel with ra32 finish or better Size: 15l Paddle size: 3" tall x 7 1/2" wide

These Corning® stirrers have a durable glass-ceramic 4 x 5 inch Pyroceram® top and offer superior performance and reliability in a low profile, space-saving design. Exclusive closed-loop stirring control monitors and regulates the stirring speed for aqueous, viscous, or semi-solid solutions. A…

Thomas No. 1203B76 Stirrer diameter: 55 mm Thomas No. 1203B77 Stirrer diameter: 45 mm Thomas No. 1203B78 Stirrer diameter: 42 mm Thomas No. 1183U39 Stirrer diameter: 50 mm

Rated 1 hp. for use with most stirrer motors. Not for use with shunt wound DC motors. A compact, lightweight, solid state, ring stand mountable control unit, both AC and DC outlets. Pulsed AC gives better low speed torque than voltage dropping devices such as rheostat or transformer. AC output: 120…

Motor, AC variable, hazardous duty, 1/2hp,230/460v 60Hz²3 phase, complete with controller, 115v 50/60Hz input, CE and ²cULus rated. Control box cord to motor is 12ft long, control²box cord to electrial source is 24ft long.

The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, this high-tech overhead stirrer with its compact design is ideal for special applications. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee.…

High-density polyethylene Porous 1 foot rods Can withstand temperatures up to 93°C (200°F) Coarse grade Average pore size of 110 microns

The Phipps & Bird state-of-the-art programmable model elevates jar testing to a new level of precision by utilizing four operator-programmable memory banks that offer virtually unlimited stirring capabilities: Each bank may be programmed with paddle speeds from 5 to 300 rpm in 1-rpm…

Stands Extra strong retort stands with H-pattern base for stability and robust support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer.   Paddle Rods Made from high grade stainless steel, there is a choice of five…

“Power Hold” Universal Clamps (8583L36 and L40) Designed with large knobs for powerful gripping plus an adjustable stop for speed and safety in set up and operation Made with precision machined aluminum rod for strength and durability Used for most applications Will hold any stirrer with…

Hi-torq SST over head drive impeller assembly - full width Size: 8l . For hi-torq motor & cap assembly (7774-40115/40230 & 7764-74000) Similar to 1964-60008 but to accept 1/2" shaft from 7764-74000 cap assy Material: 316l SST with elelctropolish finish Paddle size: 3" tall x 8" wide

Material: 316l stainless steel ra32 finish or better inside & out Includes: dust shield, impeller shaft folding paddle Locking ring secures paddle in horizontal position Dimensions: 3"x14"

Thomas No. 1205W04 Laboratory stirrer designed for simple stirring tasks for quantities up to 15 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an…

Continuous shearing and blending action mixes with introducing air Corrosion-resistant stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics,…

Blades Stainless steel with 400 mm shafts

A compact, heavy duty air motor with highly damped muffler. Complete unit consists of an air hose with a snap coupling on motor end and shut-off valve on the other. Motor will develop 1.5 hp. at 90 lbs. air pressure. Speeds are variable from 300 to 3000 r.p.m. It consumes approximately 1.98m3 free…

Offset gearbox and motors complete with right angle drive unit for pilot plant systems. Motors with right-angle drive save headspace and work well where height is restricted. Available for standard or hazardous duty applications. Available in either 1/4hp or 1/2hp with a digital 115/230v 50/60Hz…

Impellers made of stainless steel (8592H39 through H48) or glass-filled propylene (8592H36) Autoclavable 8592H36 Lower Assembly/Shaft and Impeller; shaft length x diameter: 13-1/2" x 3/8"; impeller diameter: 4". 8592H39 Lower Assembly is for use with the Nalgene 30-gallon,…

For drawing the material to be mixed from above Stirrers generate axial flow in the vessel Minimum danger of injury when contact is made with vessel Minimum shearing forces Used at medium to high speeds Additional stirrers available on special order

More power than stirrers ten times its size! Incredible 91in-oz of power yet fits in the palm of your hand! Safety - Low Voltage - Sparkless Sealed motor housing isolates motor from organic vapors Low voltage operation - Sparkless motor runs on 16 volts Convenience - Weighs less than…

Rotating ball joint seal gives vacuum-tight connection good into the micron range. Ultimate vacuum is determined primarily by the tightness of the vinyl tubing connector which fastens the unground shaft to the ball member. Operate below 500 rpm. Use with unground stirring shafts (8134,9530).…

The ultimate in compact design measuring only two by four inches. The BDC250 offers great capabilities in a small package; used in formulation, R&D, clinical research, education labs, anywhere a magnetic stirrer is used. It fits into small spaces and can be easily transported to other labs or…

Medium Duty, Model HST10 Totally enclosed, 1/17 hp, permanent magnet DC motor Direct-drive, with rpm/torque readout and X-Y output Maximum rpm: 2,500 Torque: 1.5 lbs.-in. (1.73 kg-cm) Direct drive provides 20 to 2,500 rpm and 1.5 lb.-in. torque. Available for 120 or 240 V, 50/60 Hz…

Accessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blade stirrer Gentle processing samples, used at low and medium speeds Polytetrafluoroethylene (PTFE) coating has low coefficient of friction against a solid

For connecting inert gas and vacuum sources Stopcock has metering groove cut into the plug to provide fine control of vacuum and inert gases. Distance between stopcocks is 65 mm for 8651N01 and 100 mm for 8651N03. Include patented pressure/vacuum retainers. Dimensions (mm): 8651N01: 230 L x…

Effective performance for excellent dispersion, homogenization and mixing The OV 625 Digital incorporates cutting-edge technologies and high levels of engineering expertise, to guarantee high shearing force and excellent homogenizing, emulsifying, suspending and mixing performance for a wide range…

Model 8583J10: Produces propeller speeds from approximately 200 to 10,000 rpm Compact and quiet; operates on compressed air at pressures from 30 to 100 psi (210 to 690 kPa) Sturdy, smooth-running motor develops 1/6 hp (120 W) at 80 psi (550 kPa) input Speed is variable by adjustment…

Designed to meet mixing requirements for varying viscosities and volumes Feedback circuitry to maintain speed when viscosity changes Reference circuitry to maintain speed even with voltage fluctuations of ±10% Cord connections between drive motors and controls Stirrers filter the drive…

The Heidolph overhead stirrers of the Hei-TORQUE series are perfectly designed for powerful stirring, in order to achieve best mixing results even for very challenging applications. Hei-TORQUE Value These stirrers are ideal for standard stirring tasks. They are designed to mix and…

400640 & 402645: Reusable Spinner Direct Top Drive Motor High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350…

Thomas No. 1177M32 Chuck key includes tool for removal from stirrer’s output shaft for cleaning or replacement. Thomas No. 1177M33 Chuck compatible for High Torque and Compact Caframo stirrers, accepting impeller shafts up to 10 mm (3/8”) diameter. Chuck key includes tool…

Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.