Overhead Stirrers
-
Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.
-
STARVISC Torque-Measuring Stirrers
IKA WorksMeasure viscosity and display it, even during product development: the new IKA STARVISC 200-2.5 control torque-measuring stirrer makes it possible. The result can be read in real-time on the display. STARVISC therefore has a broad range of applications. This is particularly helpful during product…
-
A powerful combination of torque and electronic sophistication. The robust 1/2 horsepower motor, PC/PLC connectivity and extensive features make the Caframo Crossover unparalleled in the market. Mixing up to 200 litres (55 gallons) in basic pre-mix, complex pilot scale, or full production batches…
-
Caframo’s high torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high performance Brushless Direct Current (BDC) motor. A unique two speed transmission provides incredible amounts of power. Caframo…
-
Bearing, Trubore, Economy, 6mm
Ace GlassTrubore bearing, heavy duty, standard taper joint, self-aligning. Unique design is forgiving of slight misalignment of stir motor and shaft. Recommended for use with our 9534 6mm precision ground stir shaft.
-
J-KEM® Miniature Overhead Stirrers
ChemglassMore power than stirrers ten times its size! Incredible 91in-oz of power yet fits in the palm of your hand! Safety - Low Voltage - Sparkless Sealed motor housing isolates motor from organic vapors Low voltage operation - Sparkless motor runs on 16 volts Convenience - Weighs less than…
-
Inert to corrosives Easy to clean Bendable into shapes These Saint-Gobain Chemware ® PTFE Fluoropolymer Stirring Rods contain a fully enclosed steel insert for stiffness, yet can bend into various shapes for use with powders. Heat resistant to 550° (288°C) and completely inert to highly…
-
Stirrer Accessories
Arrow EngineeringSupport Stand Steel base; legs have rubber pads to cut vibration Support rod is made of stainless steel. Height is 29”; available in two models. Jacob's Chuck, Adjustable Fits 3/8 ” (10 mm) diameter motor shafts Keyless Chuck, Nylon-bodied …
-
Laboratory Shakers/Roller/Rotator & Accessories
Oxford Lab ProductsThe Benchmate orbital shaker is a platform shaker that allows you to shake liquids and semi liquids to 7.5 kg in total weight.It may be used to to mix liquids in bottles, flasks, test tubes, and bowls with a variety of attachments. The Oxford Lab Products Digital tube rotator is ideal for a variety…
-
Pass-Thru Rod, Flexible shaft
Ace GlassPass-thru rod for use with Caframo 13565 & 13566 stir motors attached to our 8081 flexible stirring shaft.
-
The DLS is a digital overhead stirrer for medium-low viscosity liquids. The technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs…
-
Air Motor, Heavy Duty
Ace GlassA compact, heavy duty air motor with highly damped muffler. Complete unit consists of an air hose with a snap coupling on motor end and shut-off valve on the other. Motor will develop 1.5 hp. at 90 lbs. air pressure. Speeds are variable from 300 to 3000 r.p.m. It consumes approximately 1.98m3 free…
-
Stir Shaft, 4 Blade Propeller, PTFE
Ace GlassPTFE covered stainless steel shaft with solid PTFE, 4 blade screw propeller. Blades are pitched 45 degrees. For a better grip by the stir motor chuck, 50mm of stainless is left exposed.
-
Stirrer Accessories
Thermo Scientific NalgeneImpellers made of stainless steel (8592H39 through H48) or glass-filled propylene (8592H36) Autoclavable 8592H36 Lower Assembly/Shaft and Impeller; shaft length x diameter: 13-1/2" x 3/8"; impeller diameter: 4". 8592H39 Lower Assembly is for use with the Nalgene 30-gallon,…
-
The ReversingDigital stirrer maximizes productivity, fits into any area of the laboratory including a fume hood or enclosed workstation, and provides accurate and repeatable results every time. This stirrer also offers a choice of rotation direction - clockwise, counter clockwise or both (agitation…
-
EUROSTAR Overhead Stirrers
IKA WorksThomas No. 1205W04 Laboratory stirrer designed for simple stirring tasks for quantities up to 15 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an…
-
Manufactured from 316l stainless steel for standard bioreactor vessels. Use with over head drive motors.
-
Material: 316l stainless steel with ra32 finish or better Size: 8l
-
Overhead Stirrer
OhausOHAUS Achiever 5000 Overhead Stirrers are designed for powerful, precise stirring, safety and simplicity in all applications. The sealed design has an IP54 rating and ensures safe mixing performance even in the most demanding applications. The keyless chuck and software-controlled speed ramping…
-
MINISTAR digital Overhead Stirrers
IKA WorksThe space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require…
-
LH Overhead Stirrers
VELPThe LH is the ideal solution for medium-high viscosity liquids. The technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs for…
-
The DLS is a digital overhead stirrer for medium-low viscosity liquids. The technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs…
-
Digital Stir-Tester Accessories
Glas-ColStirrer Shafts, with 4-Blade Propeller Shaft diameter 6.4 mm, with stainless steel, 4-blade propeller on one end Listings show shaft length x propeller diameter Stirrer Shaft, with 3-Blade Propeller 8 mm-diameter shaft has stainless steel propeller and includes coupling Shaft length 222…
-
Manufactured from 316l stainless steel for standard bioreactor vessels. Use with over head drive motors.
-
400640 & 402645: Reusable Spinner Direct Top Drive Motor High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350…
-
Manufactured from 316l stainless steel for standard bioreactor vessels. Use with over head drive motors.
-
The Velp DLH is an intuitive overhead stirrer ensuring safety with overload, over-current and overheating protection. DLH guides the user through a bright and easy to read display. All the main parameters, including the set speed, actual speed, torque and timer are visible at a glance. Max…
-
MINISTAR control Overhead Stirrers
IKA WorksThe new MINISTAR series by IKA: Developed using the latest cutting-edge technology, this high-tech overhead stirrer with its compact design is ideal for special applications. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee.…
-
These Corning® stirrers have a durable glass-ceramic 4 x 5 inch Pyroceram® top and offer superior performance and reliability in a low profile, space-saving design. Exclusive closed-loop stirring control monitors and regulates the stirring speed for aqueous, viscous, or semi-solid solutions. A…
-
Upward Flow Stirrers
Glas-ColContinuous shearing and blending action mixes with introducing air Corrosion-resistant stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics,…
-
Thomas No. 1177M32 Chuck key includes tool for removal from stirrer’s output shaft for cleaning or replacement. Thomas No. 1177M33 Chuck compatible for High Torque and Compact Caframo stirrers, accepting impeller shafts up to 10 mm (3/8”) diameter. Chuck key includes tool…
-
Scilogex offers two efficient and carefully controlled digital overhead stirrer models for the safe and effective mixing of large volumes of liquids. LCD and LED Digital overhead stirrer models offer considerable functionality that would not be available on a standard analog overhead stirrer.…