Stirrers
-
Electric Laboratory Stirrers
Arrow EngineeringElectronically controlled and built to handle viscosities ranging from light watery solution to high viscosity fluid Totally enclosed, non-ventilated motor keeps corrosive fumes and dust out for a long and trouble-free service life Permanent-magnet, D.C. motor provides maximum constant torque…
-
Stirring Shaft, Glass, Polished, 10mm
Ace GlassPolished glass stirring shafts, 10mm OD. Recommended for use with only our 8050,8066,13443 and 13445 bearings. Join 8083,8085,8086,8087,8096 blades to button type shafts. Join 8088, 8089, 8090 & 8091 agitators to bead type shafts. Plain shafts will accept 8094 & 8095 agitators secured with a…
-
MICROSTAR control Overhead Stirrers
IKA WorksThe new MINISTAR series by IKA: Developed using the latest cutting-edge technology, this high-tech overhead stirrer with its compact design is ideal for special applications. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee.…
-
Stirring shaft agitator combination available in either a solid, precision ground glass shaft or all PTFE knob type shaft with a PTFE snap-fit agitator designed to fit through 14/20 and 18/11 joints. Designed for use with our 5mm ID 9524 or 9527 bearings and flasks of 50ml and smaller.
-
Beaded pipe to sanitary fitting adapter connects to the 1-1/2” beaded pipe side arm of CG-1968-GL zero dead space drain valve. Approximate overall length of adapter is 1.75”. NOTE: Requires a CG-1968 beaded pipe coupling.
-
Stirring Shaft, Unground, 9mm
Ace GlassUnground, 9mm OD stirring shaft design for use with our 9528 vacuum and debris free stirrer assembly. 380mm straight section, 416mm overall length. Use our 9530-08 blade.
-
Material: 316l stainless steel ra32 finish or better inside & out Includes: dust shield, impeller shaft folding paddle Locking ring secures paddle in horizontal position Dimensions: 3"x14"
-
PTFE Flake Catching Cups
ChemglassCup is designed to catch all flaking that occurs with PTFE stirrer bearings. Made entirely of PTFE, the complete item consists of a compression fitting, deep perforated PTFE cup and a 50 micron porosity PTFE filter disc.
-
The Velp DLH is an intuitive overhead stirrer ensuring safety with overload, over-current and overheating protection. DLH guides the user through a bright and easy to read display. All the main parameters, including the set speed, actual speed, torque and timer are visible at a glance. Max…
-
Polished Glass Stirrer Shafts
SP Wilmad-LabGlassPrecision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…
-
Benchmark’s Overhead Stirrers
Benchmark ScientificBenchmark’s Overhead Stirrers feature advanced LCD controls for accurate display of both speed and run time. The stirrers include a support stand complete with mounting hardware. The mixer is easily attached at the desired height for compatibility with a wide range of vessels (up to 24…
-
Collar, Stir Shaft
Ace GlassDesigned to be used with 8068, 8070, 8071, 8074 or 8078 stirring shafts. Handy for positioning shaft in bearing, and preventing shaft from dropping into flask. Supplied with PTFE gasket to prevent scratching top of bearing and acts as dust cover. Available in either Glass-filled PTFE or 316…
-
Fully flexible drive shaft facilitates isolation of the stirrer motor from the reactor. Complete units, code -30 (91.4cm) and code -32 (152.4cm), designed for use with 8mm (5/16in) motor shaft. Purchase the optional code -27 adapter for motors with 9.5mm (3/8in) shafts. Reactor end consists of a…
-
Stirrer Multi Position
OhausPowerful Magnetic Stirrers available in either four or nine position capacities provide precise speed control that deliver repeatable performance. Offered in both digital and non-digital models. Digital models have touchpad controls for input of speed & time. Non-digital models have an…
-
Similar to CG-2070 but with a tooled lubricant cup at the top of the bearing to hold an increased amount of lubricant. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.
-
Scilogex offers two efficient and carefully controlled digital overhead stirrer models for the safe and effective mixing of large volumes of liquids. LCD and LED Digital overhead stirrer models offer considerable functionality that would not be available on a standard analog overhead stirrer.…
-
Stirrer Bearing, PTFE, 6-10MM Shafts
Ace GlassPTFE stirrer bearing featuring a non-shedding, fully enclosed, anti-whip, chemically resistant design. Models available for 6, 8 and 10mm glass, metal or PTFE stir shafts. Can be used in slight pressure or vacuum applications. Maximum recommended speed for continuous operation is 500 rpm. Unlike…
-
Manufactured from 316l stainless steel for standard bioreactor vessels. Use with over head drive motors.
-
Short width stainless steel folding impeller assembly for standard bioreactor vessels 6l 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3? x 5 1/4?
-
LH Overhead Stirrers
VELPThe LH is the ideal solution for medium-high viscosity liquids. The technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs for…
-
Material: 316l stainless steel with ra32 finish or better Size: 8l
-
MS-3000, High speed magnetic stirrer, 120v
Grant InstrumentsThe MS-3000 is a compact magnetic stirrer with stainless steel working surface. It provides stirring of liquids up to 5 litres to a maximum of 3000 rpm. The MS-3000 has a powder enamelled strong steel enclosure, which is chemically resistant to acids and alkali. The stirrers are supplied with a…
-
1 P Proc Stirr Comp, 8L-230V
Bellco GlassBell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in…
-
9 Pos Process Stirr Comp,115V
Bellco GlassBell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in…
-
5 Pos Proc CPT Stir Comp,230V
Bellco GlassBell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in…
-
2 Pos Proc Stirr Comp,115V
Bellco GlassBell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the researcher a wide range of capabilities and the latest innovations in stirring…
-
2 Pos F/E Proc Stir Comp,230V
Bellco GlassBell-ennium Process Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. The Front-End models are designed to position so that one flask is positioned behind the other, minimizing the…
-
5 Pos Proc CPT Stir Comp,115V
Bellco GlassBell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in…
-
5 Pos Process Stirr Comp,230V
Bellco GlassBell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in…
-
IKAMAG® C-MAG HS Magnetic Stirrer
IKA WorksMagnetic stirrer with heating and ceramic heating plate which offers excellent chemical resistance. Powerful motor for stirring quantities of up to 5 l (H2O) Fixed safety circuit of 550 °C Hot Top indicator >> hot surface warning to prevent burns! Exact temperature setting via…
-
The state-of-the-art digital multi-position magnetic stirrer with 6 or 15 positions, that remains cold even after several days of continuous use. Reliable & Precise Setting Bright digital display for accurate speed monitoring Exclusive, on-board timer for unattended operation …
-
Shaft is precision ground and polished to fit our CG-2077-H, CG-2077-G and CG-2077-U style 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120° apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR CLOCKWISE ROTATION.