Precision bore bearing for use in moderate vacuum with a CG-2074 or CG-2075 ground 10mm stirrer shaft. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.

Powerful magnets and motors guarantee a high-speed and a good management of the devices. Performance & Convenience Ergonomic designed, lightweight, easy to operate, and low profile. Best-in-the-class with broad speed range and suitable for high-speed rotation experimental…

RT Basic Series Magnetic Stirrers Experience the reliability of our plug-and-play stirrers, ideal for routine stirring applications. Features: Strong magnetic coupling to ensure consistent stirring during experimental procedures Three size options Low profile lightweight…

Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

All stainless steel 303/304 are constructed with 15° pitched blades which creates an axial flow. Various shaft lengths and diameters with permanent 2" or 3.5" 3-blade propeller for every mixing need available. PTFE coating available.

Stirring bars with large, 25mm (1 inch) raisied center ring.

Ideal for applications with changing viscosity requirements Use for either high-speed or high-torque mixing Solid-state controller for precise speed control Two motor axles give you two mixers in one! The direct-drive axle provides high-speed, low-viscosity mixing; switch to the…

3/8HP Brushless DC motor for use on pilot plant reactors up ²to 200L. May be used with either the 120V or 240V BLDC ²motor controllers. Supplied with 6ft removable cable and ²mounting hardware.

Caframo’s BDC2002 offers ultimate versatility and maximizes productivity. With the push of a button, the unique Stirlight™ lights up so that solutions can be seen clearly. Included in each purchase: Overhead stirrer motor, chuck, chuck key, support rod, external power supply, grounded…

Stirring shaft agitator combination available in either a solid, precision ground glass shaft or all PTFE knob type shaft with a PTFE snap-fit agitator designed to fit through 14/20 and 18/11 joints. Designed for use with our 5mm ID 9524 or 9527 bearings and flasks of 50ml and smaller.

The AREX 5 is a robust and versatile hotplate stirrer suitable for applications ranging from basic to temperature-sensitive where precise sample thermoregulation is required. The AREX 5 can work stand-alone or be upgraded to digital by connecting the VTF digital temperature controller. …

Safely conduct applications with aggressive media in high-humidity environments with this Thermo Scientific™ Cimarec™ i Telesystem Multipoint Stirrer. The stirrer is designed for integration with incubators and controlled climate chambers. Includes: cord set with various plugs and the…

OHAUS Achiever 5000 Overhead Stirrers are designed for powerful, precise stirring, safety and simplicity in all applications. The sealed design has an IP54 rating and ensures safe mixing performance even in the most demanding applications. The keyless chuck and software-controlled speed ramping…

The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require…

RT Basic Series Magnetic Stirrers Experience the reliability of our plug-and-play stirrers, ideal for routine stirring applications. FEATURES Strong magnetic coupling to ensure consistent stirring during experimental procedures Three size options Low profile lightweight design…

Custom designed stirrers provide precision stirring up to 1400 rpm Hot surface warning light flashes when plate temperature is above 50°C Capable of mixing large volumes, up to 15 L Three color choices: blue, white, and black Powerful magnets provide these analog stirrers…

The Grant bio mini magnetic stirrer MMS-3000 is a compact magnetic stirrer for handling small volumes in routine laboratory procedures such as pH metering, extraction and dialysing. Adjustable speed control: 0 to 3000 rpm Stirring volume: 20 litres Quiet operation, small size - fits neatly…

Micro stirrer has a 6mm OD x 305mm long precision ground button style shaft and a football shaped 11 x 33mm TFE blade. The 11 x 33mm blade can be used in flasks having a capacity of 25mL and above. Complete stirrer assembly consists of a shaft, bearing and blade.

This bearing is the standard liquid seal type except that the use of Trubore tubing enables this unit to perform very satisfactorily under high vacuum conditions. Use our precision ground stirring shafts (8068,8070,8071,8073,9532,9533).

RT Touch Series Magnetic Stirrers Stay in control with our low profile digital display stirrer, ideal for routine stirring applications where visible stir speed is required. FEATURES Digital control Gradual start-up stirring to prevent splashing Designed for stir rod…

Small and efficient magnetic stirrer. Robust Structure Technopolymer casing resists chemicals White surface for visualization of particles and color changes Long life operation Reliable Results Speed regulation up to 1100 rpm Accepts up to 5 liter flasks …

4 Blade PTFE agitator available with either 45 or 90 degree blade angle. For use with glass or metal shafts and is secured using a compression style fitting allowing it to positioned anywhere along the length of the shaft.

OHAUS offers four models for stirring capacities between 25 to 200 L allowing you to choose the right model for your application. The broad top plate surface allows processing of oversized vessels such as carboys for your large volume stirring. The powerful magnetic drive is also capable of mixing…

The ultimate in compact design measuring only two by four inches. The BDC250 offers great capabilities in a small package; used in formulation, R&D, clinical research, education labs, anywhere a magnetic stirrer is used. It fits into small spaces and can be easily transported to other labs or…

Tank clamp lets you mount a mixer head and a controller support (either model 04552-70 or 04552-75) directly onto an open top drum or container (maximum 1-1/2" [38 mm] wall thickness) Support stand has an electropolished cast steel base and 303 stainless steel support rod measuring 29"H x…

Semi-micro stirrer has a 10mm OD x 440mm long precision ground button style shaft and a 15 x 46mm TFE blade. Lower end of shaft has a reduced diameter to allow passage through a 19/22 outer joint. The 15 x 46mm blade can be used in flasks having a capacity of 100mL and above. Complete stirrer…

All propellers mixers are made of 316 stainless steel. They have a 5/16-24 internal thread for easy assembly with all of our stainless steel shafts. All stainless steel mixer shafts are made of 316 stainless steel. These quality mixer parts have a 5/16-24 external thread for easy assembly with all…

PTFE stirrer bearing featuring a non-shedding, fully enclosed, anti-whip, chemically resistant design. Models available for 6, 8 and 10mm glass, metal or PTFE stir shafts. Can be used in slight pressure or vacuum applications. Maximum recommended speed for continuous operation is 500 rpm. Unlike…

A 19mm precision ground and polished stirrer shaft to fit CG-2086 19mm PTFE bearings. Side button for attachment of CG-2089 PTFE stirrer blades. PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2085. ALSO NOTE:…

Thermo Scientific™ SuperNuova+™ stirrer series provides reliable performance, dependable safety and simple operation. Units are available in two sizes, including a multi-position model with optimized controls and settings for applications that demand advanced precision. Intuitive…