Sterilization Indicators

Compare Tool

Select up to 3 products

HomeAll Products

Sterilization Indicators

1 - 32 of 60
Sort
View
Show
  • Chemical Process Indicators – EO Sterilization

    Crosstex

    Ethylene Oxide (EO) Chemical Process Indicators (CPIs) are manufactured to meet performance specifications described in ISO 11140-1 “Sterilization of health care products - Chemical indicators - Part 1: General requirements,” for Class 1 Process Indicators. The purple-to-green color…

  • SporAmpule® Liquid Biological Indicators

    Hardy Diagnostics

    Monitoring your autoclave couldn’t be easier with the convenient SporAmpule. Easy to use! Process one or more SporAmpules, along with your normal load, then incubate at 55-60°C for 48 hours and observe for a color change. No activation, crushing, or additional culture media is…

  • SporView® Self-Contained Biological Indicators

    Crosstex

    The SporView Self-Contained Biological Indicators (BIs) are approved for use in gravity, prevacuum, and flash cycles. SporViewPlus can also be purchased with 50 BIs and 50 STEAMPlus™ integrators per pack, for immediate release of routine or flashed loads. Final visual spore growth is recorded…

  • B/T Sure™ Biological Indicators

    Barnstead

    Verifies the sterility of your instruments, glassware and other products in just two days Simple, three step process Run indicator through standard sterilization cycle; compress plastic vial to break glass ampule inside and then incubate for a minimum of 48 hours. When complete,…

  • Strate-Line® Steam Sterilization Strips

    Propper Manufacturing

    Strate-Line Sterilization Indicator Strips are an economical alternative to OK strips and are designed for monitoring steam sterilization cycles at 250°F (121°C) and 273°F (134°C). It uses the same reactive ink as the OK strip. The correct endpoint is indicated when the…

  • Sterilamp II Biological Indicator

    Thermo Scientific

    Indicators verify sterility of instruments, vials, media, liquid cycles and other products in less time than it takes to send samples to an outside lab. Choice of two biological indicators: for media and liquids or for instruments, glassware, and other

  • Sterilization Indicators

    3M

    For Exposure Control (1251T50) Peel-off, pressure sensitive labels For use in dry heat sterilizers Comply™ (ATI Sterilabel™) Sterilization Indicator Labels are for use in dry heat sterilizers 170°C (340°F) or above. Pressure-sensitive labels are for hard-surfaced areas such as unwrapped glass…

  • VERIFY™ Dual Species Self-Contained Biological Indicators

    Steris

    VERIFY™ Dual Species Self-Contained Biological Indicators (SCBIs) are for use in monitoring steam sterilization and ethylene oxide (EO) sterilization processes. Each SCBI is completely self contained within a vial and contains a disc inoculated with dual species bacterial spores (Geobacillus…

  • Comply™ Bowie-Dick Test Packs

    3M

    3M™ Comply™ Bowie-Dick Test Packs are used to monitor the performance of vacuum-assisted 132ºC - 134ºC (270ºF - 273ºF) steam sterilizers; test packs will reproducibly detect residual air in the sterilizer chamber due to air leaks, air removal failures and inadequate…

  • Steam-Dot® Indicators

    Propper Manufacturing

    Self-adhesive Steam-Dot® Indicators offer a fast, positive visual check on items that were sterilized by steam. 

  • Chex-All® III Pouches

    Propper Manufacturing

    Process indicators are printed on the pouch corners and covered by the extension of the transparent film beyond the sealed area. This guarantees protection of the indicators from direct contact with metal trays or instruments, yet does not obstruct observation of the indicator color change. …

  • Steri-Wrap® II

    Propper Manufacturing

    A softer wrap for greater drape-ability Features: Efficient microbial barrier and provides for pack security Virtually lint free and has a tightly anchored fiber structure Does not delaminate and can be used on either side Excellent liquid repellency and is an effective…

  • Biological Test Pack and Culture Service Program

    Propper Manufacturing

    The Centers for Disease Control and AAMI recommend a weekly biological indicator challenge of all sterilizers. This is important to help prevent cross-contamination, and to protect patients and medical professionals from infection that can result from a faulty sterilizer or its incorrect…

  • Duo-Record® Sterilization Record Cards

    Propper Manufacturing

    Provides monitoring and documentation for both steam and EO gas sterilization procedures Permanent load information is entered on both sides of the Duo-Record Card A color-coded Duo-Record Label (sold seperately) with control numbers and expiration date or the “sterile…

  • Chex-All® Sterilization Pouches

    Propper Manufacturing

    Heat-Sealable Chex-All® Pouches are premium quality sterile packaging products designed to reduce the cost of sterilization processing. The pouches have independent indicators imprinted on both inside and outside of every pouch. While external indicators serve as process indicators, the…

  • Steam Dot® Blu™ Indicators

    Propper Manufacturing

    Steam Dot Blu™ utilizes the latest in environmentally friendly inks: the Blu™ ink technology. All products made with Blu™ inks are free of all heavy metals, including lead.  Environmentally Friendly Technology: Manufactured without lead & heavy metals …

  • Spore Suspensions - Bacillus subtilis (Cell Line 5230)

    Crosstex

    Crosstex manufactures Bacillus subtilis (Cell Line 5230) Spore Suspensions utilized in low temperature (<121°C) steam sterilization processes. The Spore Suspensions are pure suspensions of spores with known steam resistance characteristics and a variety of population levels standardized per…

  • Spore Suspensions - B. subtilis (Cell Line 6633)

    Crosstex

    Crosstex manufactures Bacillus subtilis (Cell Line 6633) Spore Suspensions utilized in low temperature (<121°C) steam sterilization processes. The Spore Suspensions are pure suspensions of spores with known steam resistance characteristics and a variety of population levels standardized per…

  • Self-Seal Sterility Maintenance Covers

    Propper Manufacturing

    Plastic dust covers protect the sterile pack during storage, handling, and transportation from dust, moisture, or airborne contaminants, and extend sterile shelf life when definite shelf life terms are used. Self-Seal Dust Covers satisfy current regulations for sterility maintenance covers.

  • DUO-FLASH® Sterilization Indicators

    Propper Manufacturing

    Two indicators in one: monitors 3 and 10 minute flash cycles at 272°F Specifically designed for non-porous and porous loads. After monitoring a 3-minute steam flash sterilization cycle used for a non-porous load, the arrow pointing to the "3" turns from green to dark. After…

  • Chemical Process Indicators – VH2O2 Sterilization

    Crosstex

    Hydrogen Peroxide Chemical Process Indicators (CPIs) are manufactured to meet performance specifications as described in ISO 11140-1 “Sterilization of health card products - Chemical indicators - Part 1: General Requirements,” for Class 1 Process Indicators. Hydrogen Peroxide CPIs are…

  • Emu-Chex™ Emulating Indicator Strips

    Propper Manufacturing

    Our Emu-Chex™ Chemical Indicator introduces innovations in indicator ink technology based on our advanced lead and heavy metal free ink formulation. Our new generation of indicators demonstrates exceptional performance which is customized for the most widely utilized steam cycles in hospital…

  • KIMTECH™ KC100 Kimguard™ Sterilization Wrap

    Kimberly Clark

    Kimtech Pure Kimguard Sterilization Wrap is a must-have tool for sterile processing environments, such as in pharmaceuticals and medical devices. The line comes in six grades of wrap fabric, from KC 100 to KC 600, so you can get precisely the right protection for your needs. The higher the…

  • O.K.® Sterilizer Bags

    Propper Manufacturing

    These all-paper, high quality, gusseted sterilization packaging bags are available in three sizes and are manufactured to meet stringent requirements. The exterior of each bag carries a pre-printed process indicator to allow easy identification of packs that have been subjected to the steam…

  • Twindicator® Sterilization Indicators

    Propper Manufacturing

    Twindicator® is an indicator designed for monitoring all critical parameters of steam sterilization cycles at 250°F (121°C) and 273°F (134°C). Twindicator® adds extra flexibility in sterilization monitoring: each 8” strip is perforated to allow for two 4” strips.…

  • Duo-Check™ Steam Test Pack

    Propper Manufacturing

    Duo-Check™ combines the immediate accuracy of Vapor Line® Class 5 Integrator with the traditional reliability of the BI-O.K.® spore test without the need to wait for an early readout biological vial. Say “goodbye” to costly recalls and release with confidence! …

  • BI-O.K.® Self-Contained Biological Indicators

    Propper Manufacturing

    Propper BI-OK® self-contained biological indicators for Steam and EO gas are designed for sterilization efficacy monitoring in hospitals, clinics, and for industrial applications. After processing in a sterilization cycle and activation of media by crushing the glass vial, indicators need to be…

  • Biological Chemical Indicator Strips

    Thermo Scientific

    Chemical indicator strips, for use with steam sterilizers, require a temperature of 132 to 135°C (270 to 275°F). Daily verification ensures that items being processed have been run through a cycle, preventing the accidental use of items that have not been adequately processed.

  • Record Keeping Envelopes

    Propper Manufacturing

    Separate color-coded envelopes for steam and EO gas sterilization: Each envelope is specifically designed for its sterilization process, and contains checklists for operators All essential data is in one place: Each envelope holds charts, indicators, Duo-Record cards and biological monitoring…

  • Bio-Challenge Test-Pak®

    Propper Manufacturing

    For use with biological indicators in testing all steam sterilizers, pre-vacuum or gravity.  Accurate : Proven to be equivalent to the standard AAMI test pack Convenient : Works with the biological indicator already used, self contained or spore strip type. No need to purchase new…

  • Nonslip Sterility Maintenance Covers

    Propper Manufacturing

    Plastic dust covers protect the sterile pack during storage, handling, and transportation from dust, moisture, or airborne contaminants, and extend sterile shelf life when definite shelf life terms are used. Nonslip Dust covers satisfy current regulations for sterility maintenance covers.

  • Gas-Chex® Sterilization Indicators

    Propper Manufacturing

    Gas-Chex® Sterilization Indicator Strips have the easiest-to-remember color scheme: Red for Stop (pack was not yet processed or the process was inadequate), and Green for Go. Gas-Chex® Strips are suitable for monitoring gas concentration and exposure, and are especially suitable for…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.