The WB6000 Series Metal Wrist Band and Coil Cord set is a premium band set offered by Transforming Technologies. Featuring a high quality adjustable, one size fits all metal wrist strap set with an insulating outer surface and stainless steel inner surface. The band is standard with 4mm, machined…

The WB9000 Series Metal Wrist Band and Coil Cord set is a premium band set offered by Transforming Technologies. Featuring a high quality adjustable, one size fits all metal wrist strap set with an insulating outer surface and stainless steel inner surface. The band is standard with 4mm, machined…

This conductive ESD floor runner has a non-slip, grooved surface that provides excellent traction and allows the mat to be easily cleaned. A v-groove emboss provides a non-slip surface that provides excellent traction and allows the mat to be easily cleaned. The ribbed matting is also very…

The Transforming Technologies HG1390S Heel Grounder is constructed from durable materials and features a classic hi-visibility yellow/green hook & loop closure with an elastic insert to maximize fit and comfort. HG1390S heel grounders connect the person wearing them to ground via a proper floor mat…

Transforming Technologies ComfortDome ESD Anti-Fatigue mat provides unparalleled comfort in areas where static control is a concern. Evenly spaced ComfortDomes on the conductive surface of the mat provides superior anti-fatigue relief because ComfortDomes get softer as compressed, not harder like…

Transforming Technologies FM2525 is used to interconnect two monitored work surfaces. A straight cord with male snap fasteners at each end and no resistors. The FM2525 comes with two molded low profile mushroom caps with 3/8? (10mm) male snaps ensure a secure connection to mats.

The IDP-Stat sheet protectors are designed for use in controlled areas such as clean rooms where there are ESD sensitive devices. The static safe 9 hole punched sheet protectors fit into binders and are made from a permanently dissipative PVC polymer. This product is designed to hold 8.5” x 11”…

A high-quality ring terminal that accepts standard banana jack.  Can be used to add a ground point for items in electronics.  Made with copper and chrome.  Ring Size: 1/4 (0.125”) 

The SRM500K is a digital surface resistance test kit designed to test all conductive, anti-static and static dissipative surfaces for electrical resistivity/ resistance according to EOS/ESD, CECC, ANSI, ASTM test procedures. It accurately and quickly measures resistance between two points (RTT) and…

The adjustable WB2500 series dual wire fabric wrist strap set features two 180 degree conductive paths around the wrist, providing maximum skin contact. The band is standard with two 4mm male snaps and is used with dual wire resistance based constant monitors. Dual wire wrist straps provide…

The WB5407 Disposable Wrist Strap offers a safe, effective and economical means for pro-viding static protection to end users of electronic devices. The WB5407 is designed for inclusion with shipments of computer upgrades, network systems and other devices to provide protection at the customer?s…

The Ptec™ IN5140 68KHz AC benchtop air ionizer is a small, efficient static elimination device with variable fan speed for protecting electronic components and general static protection. Using AC corona technology, to make the air more conductive, Ptec™ ionizers produce a balanced stream of…

The CP4070 Metal Bench Mount Common Point Ground offers the common ground point required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20. The metal enclosed box mounts under front edge of workstation. Includes a 15' long ground cable with #10 ring terminal connector. Two banana jack receptacles for secure…

A high-performance garments that protects against airborne contamination and static charges. Transforming Technologies ESD Cleanroom Frock is engineered to meet up to a Class 100 clean room demands for industries such as microelectronics, semi-conductors, disk drives, laser, and similar industries.…

Designed to test point-to-point (RTT) and point-to-ground resistance (RTG) in accordance with ESD Association Standards. The probe can be used to make measurements on floors, mats, workbenches, garments, seating or any other flat surface where the resistance between two points is required.

Designed for use at workstations and other manufacturing areas, the three layer VME Vinyl serves a dual purpose: the closed-cell foam absorbs and reduces the shock and impacts associated with manufacturing electronic equipment such as disk drives and hard drives, while also dissipating static…

The one-size-fits-all WB7000 Dual Conductor Fabric Wrist Bands from Transforming Technologies are used with Dual Conductor Constant Work Station Monitors. The WB0070 wrist strap features a silver plated, monofilament, continuous thread woven together with elastic nylon for full conductivity and…

Transforming Technologies CP4822 is a table mat ground cord with four banana jack receptacles for secure ground connections. The CP4822 offers the common ground point required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20. The ground block mounts under front edge of workstation or connects to a 10mm stud…

Static Dissipative trash liners are ideal for clean rooms, manufacturing, inspection, quality control and research industries where static control is crucial. Permanently conductive and conductivity does not depend on humidity. It is non-sloughing, does not contaminate components it comes in…

This SCS Dual-Wire Thermoplastic Wrist Strap consists of an insulative exterior with a conductive interior and a 3.4mm dual conductor jack. The wrist strap is light weight, low profile and safely makes contact with human skin. The “zipper” style latching mechanism easily adjusts to most…

Ionizing nozzle provides pinpoint ionization with hands-free foot peddle operation. The IN4200 flexible nozzle neck frees the operator’s  hands during assembly and manufacturing processes. A foot pedal controls both ionization and airflow, which reduces compressed air costs and…

Bemcot wipers are for quick and easy wiping in cleanrooms and other working environments that demand the lowest levels of lint and particles. BEMCOT is characterized by its low particle generation, high absorbency, high purity, high chemical resistance, high heat resistance, anti-static,…

ION-100A Ionizer optimizes the accuracy of results when weighing extremely finite samples by mitigating static charges that can lead to inaccuracies. ION-100A eliminates static electricity on plastic and glass weighing vessels which are particularly prone to attracting static charges. The ION-100A…

Anti-Static and ESD curtains are a great way to separate critical workspaces while also attending to the static-sensitive nature of certain products. Transparent PVC ESD curtains are an ideal barrier wall for sensitive environments. Honeycomb grids are installed on both sides of the PVC curtain…

The ESD tray liners are used to line the surface of process trays to keep items protected and from sliding around. ESD rubber provides a better path-to-ground and cushion versus the hard surface of the conductive tray. The economical dual layer rubber material is cut to fit a16"x24" process…

Common point ground cord connects two wrist straps and a work surface mat to ground. Low profile design features holes for permanent mounting to a bench. Comes with 15ft. cord, 3/8" stud snap with 1M‰ã_ resistor for mat connection and ring terminal to bulilding ground.

The SCS wrist strap input jack is suitable for use with 724 workstation monitor unit. It is made of high quality material, which ensures durability and long lasting usage. It is easy to install and convenient to use.

This device operates on a piezoelectric effect to emit positive (trigger squeeze) and negative (trigger release) charges to neutralize static on virtually any surface. The gun remits no radioactivity and it does not require electricity or batteries. The unit measures 4" x 6".

The Transforming Technologies CC2080 Series Dual Wire Coil Cord's polyurethane coil insulation and strain relief molding offers excellent coil memory and endurance. Dual grey and black 4 mm sockets help maintain a constant connection. Dual wire wrist straps provide redundancy. When used with…

The FM1515 is a low profile cord that grounds floor mats or work surfaces. A molded mushroom cap reduces concern of tripping hazards. The 15' long ground cord includes a 10mm male snap with a 1meg resistor

ComfortGEL ESD Anti-Fatigue Mats provides maximum softness and cushioning while Transforming Technologies ComfortGEL ESD Anti-Fatigue mat prevents worker fatigue in controlled environments. This non-slip, water resistant mat is constructed from a close cell rubberized gel foam which provides an…