Static Eliminator Duostat For neutralization of static charge on balances, optics, films, etc. Strength 500 µCi; effective range approximately 40 mm No state or USNRC-specific license is required to purchase or possess this unit. Effective life span is one year. Spent unit…

A homogeneous polymer mix construction with unsurpassed electrical properties, gives VinylStat C a consistent, controlled static drain and physical properties with highest level of protection. Available in 0.093″ or 0.0625″ thick. Resistant to degradation by inorganic acids, organic…

VinylStatB provides excellent ESD protection and extra cushion for component safety and operator comfort. VMB utilizes a three layer construction consisting of a conductive metalized fleece sandwiched between a solid, vinyl top surface and a foam, base layer. Surface resistivity is in the…

The Model IN5120 68KHz AC in-tool air ionizer is a small, efficient static elimination device with variable fan speed for protecting electronic components and general static protection. Using AC corona technology, to make the air more conductive, Ptec™ ionizers produce a balanced stream of positive…

Benchtop Air Ionizer, Including Ionizer, Operator's Manual, And Power Transformer; 100 Vac-240 Vac

All products are made with Conductive Polypropylene handle and ESD Bristle. All conductive products were tested and proved to meet the following standards: ESD TR53-01-06 Compliance verification of ESD protective equipment and materials, ESD association (USA) ASTMD-257-78:…

The 8812 Lapel Collar jackets are fabricated from light weight 88% polyester and 12% carbon fabric for unmatched operator comfort. Excellent for warm environments. Superior workmanship provides reliable panel to panel continuity. The JKC Series 8812 jackets maintains consistent continuity readings…

The FM1515 is a low profile cord that grounds floor mats or work surfaces. A molded mushroom cap reduces concern of tripping hazards. The 15' long ground cord includes a 10mm female snap with a 1meg resistor

Anti-Static and ESD curtains are a great way to separate critical workspaces while also attending to the static-sensitive nature of certain products. Transparent PVC ESD curtains are an ideal barrier wall for sensitive environments. Honeycomb grids are installed on both sides of the PVC curtain…

The PDT 800K is an easy, accurate, and time saving One-Touch digital wrist strap and footwear tester. Simultaneously and independently test both feet and a wrist strap while filtering out human body noise. The results are visible with the digital screen on the tester's face. What makes the PDT 800K…

Heel Grounder Converts non-ESD footwear to footwear that will provide a path-to-ground and will not generate a charge. Tab to Cup Resistance: 1 x 106 to < 1 x 107 ohms at 100 volts Meets the ANSI/ESD S20.20 required limit tested per ESD SP9.2 & ESD TR53 High…

The 3M Ionized Air Gun 980 Is An Excellent Tool For Blowing Particulate Contamination Off Of Any Surface. It Releases A Balanced Stream Of Compressed Ionized Air That Neutralizes The Static Charge That Can Hold Particulates To A Surface.

The Ricca Chemicals potassium pyroantimonate TS (test solution) is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

ComfortTREAD ESD Runners quickly snap together to create ergonomic anti-fatigue floor with excellent traction. ComfortTREAD diamond-plate ESD anti-fatigue mats keep your workers comfortable and your ESD sensitive equipment safe.  The mat will not separate, bubble-up, ripple, tear, compress…

The WB4000 Series Wrist Band and Coil Cord set is a premium band set offered by Transforming Technologies.  Featuring a machined 4mm snap post, the soft, wrist band features a 360 degree conductive contact around the wrist, providing maximum skin contact. The band uses hypoallergenic…

The Model IN5110 68KHz AC benchtop air ionizer is a small, efficient static elimination device with variable fan speed for protecting electronic components and general static protection. Using AC corona technology, to make the air more conductive, Ptec™ ionizers produce a balanced stream of…

Transforming Technologies FM2000 Common Point Ground Cord System with the unique large center snap and two grounding connections allow for grounding of a wrist strap and work surface. The 10’ (extended length) coiled cord section snaps to technician’s wrist band; the 5’ (extended length) coiled…

Ensure that you are electrically connected to ground by wearing ESD socks with your ESD shoes or Heel Grounders. The toe and heels of the socks are reinforced with conductive yarn.  Made with polyester, spandex and conductive yarn. Available in small, medium and large.

Low-compression ESD floor tiles for industrial environments. The PV Series Comfort matting is structurally robust and is capable of tolerating the heavy loads and harsh conditions associated with industrial environments while providing a comfortable, ESD- safe area for people required to stand for…

The WB1600 Series Wrist Band and Coil Cord set is the most versatile and cost effective band set offered by Transforming Technologies. The soft, blue woven fabric and 360°curved buckle of the wrist band allows the skin to breathe and makes it very comfortable to wear. The band uses…

Brushes remove static charges, resulting in the adhesion of particles such as dust to an object Soft hair brush designs prevents scratching Ideal for dusting balances, cuvettes, microscope slides, optics and instrument/computer screens Removes static as it brushes Conductive composite handle …

With Transforming Technologies? MC1221W ESD safe microscope cover you can protect your microscope optics from dust and other contamination while keeping your work station ESD safe. Common microscope covers are made from vinyl, a material that is an insulator and potential static generator. The…

Superior workmanship provides reliable panel to panel continuity of the garment. The 5049 Series Garment maintains consistent continuity readings for up to 100 wash cycles. This ESD Jacket features a three snap cuff for proper fit adjustment.

The adjustable WB2695P series dual wire fabric wrist strap set features two 180 degree conductive paths around the wrist, providing maximum skin contact and two 4mm male snaps is standard. The WB0025 is constructed with stainless steel back plates, nylon molding and a premium elastic yarn that…

StaticCare Antistatic Hand Lotion is specially created for use by individuals in the electronics industry to increase the conductivity of the skin. This fast absorbing, non-greasy ESD hand lotion enhances the contact between a persons skin and grounding devices such as wrist straps and heel…

The Ptec™ IN5140 68KHz AC benchtop air ionizer is a small, efficient static elimination device with variable fan speed for protecting electronic components and general static protection. Using AC corona technology, to make the air more conductive, Ptec™ ionizers produce a balanced stream of…

The IN4000 flexible ionizing nozzle frees the operator's hands during assembly and manufacturing processes. A foot pedal controls both ionization and airflow, which reduces compressed air costs and extends the life of the ionizer. The model IN4000 ionizing air nozzle produces a 68KHz AC output…

Transforming Technologies’ bright yellow vinyl floor tape with bold black ESD symbols is perfect for marking off ESD safe areas. Print reads “CAUTION Static Sensitive Area” with ESD symbol. Tear resistant 2? and 3” wide rolls available in lengths of 36 yards.

VinylStat FM2 anti-fatigue matting provides a cushioning anti-fatigue surface to stand as well as grounding the person at the same time. VinylStat FM2 is constructed with a closed-cell expanded PVC that results in a cushioning spongy surface and provides a path-to-ground for electrostatic…

The HG4560 Disposable Heel Grounder is the perfect solution for plant visitors and other temporary personnel who enter static controlled environments with ESD protective flooring. Constructed of a durable non-woven fabric impregnated with carbon, our disposable heel grounders are comfortable to…

ION-100A Ionizer optimizes the accuracy of results when weighing extremely finite samples by mitigating static charges that can lead to inaccuracies. ION-100A eliminates static electricity on plastic and glass weighing vessels which are particularly prone to attracting static charges. The ION-100A…