MilliporeSigma Chemicals Standards S
-
UN No.: 2031 pH: (H2O, 20°C) Density: 1.031 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
UN No.: 1824 pH: 13.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.022 g/cm3 (20°C) Ignition Point: 13.5 (H2O, 20°C)
-
-
UN No.: 1824 pH: 12.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.055 g/cm3 (20°C) Ignition Point: 12.5 (H2O, 20°C)
-
Sirolimus-D3 sol. 100 mug/mL in acetonitrile, 1mL ampule
MilliporeSigmaA stable-labeled internal standard for the immunosuppressant sirolimus, an immunosuppressant and narrow therapeutic index drug used to prevent rejection in organ transplantation. This ertified calibration material is suitable for critical quantitative LC-MS/MS applications in clinical and…
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
-
Solubility: (20°C) soluble Density: 0.998 g/cm3 (20°C)
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
Standard Oil For Atomic Absorption Spectroscopy
MilliporeSigmaCAS No.: 8012-95-1 pH: (H2O) not applicable Solubility: (20°C) practically insoluble Vapor Pressure: 0.0001 hPa (20°C) Flash Point: 195°C Density: 0.85 g/cm3 (20°C) Ignition Point: (H2O) not applicable Saturation Concentration: >300°C Evaporation Number: 16 mm2/s (40°C)
-
di-Sodium Tetraborate Decahydrate
MilliporeSigmaSynonyms Borax, Sodium biborate decahydrate, Sodium borate decahydrate Hill Formula B4Na2O7*10H2O Chemical formula Na2B4O7*10 H2O HS Code …
-
-
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
This stable-labeled internal standard is suitable for quantification of scopolamine levels by LC/MS or GC/MS for applications in clinical toxicology, food testing, and forensic analysis. Scopolamine, also known as hyoscine, is a naturally-derived medication used to treat postoperative nausea and…
-
pH: 7 (H2O, 20°C) Density: 1.00 g/cm3 (20°C) Ignition Point: 7 (H2O, 20°C)
-
Scopoletin analytical standard
MilliporeSigmaSynonym: 6-Methoxyumbelliferone, 7-Hydroxy-5-methoxycoumarin, 7-Hydroxy-6-methoxy-2H-1-benzopyran-2-one, Chrysatropic acid, Esculetin-6-methyl ether, Gelseminic acid CAS Number: 92-61-5 Empirical Formula (Hill Notation): C10H8O4 Molecular…
-
CertiPUR® Barium ICP Standard, 1000 ppm
MilliporeSigmaFormula: Ba(NO3)2 in HNO3 2-3% Formula Weight: N/A Synonym(s): Description: Composition: Barium nitrate in nitric acid Suprapur®; 2-3%
-
pH: 1.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.000 g/cm3 (20°C) Ignition Point: 1.5 (H2O, 20°C)
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
UN No.: 1824 pH: 13.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.022 g/cm3 (20°C) Ignition Point: 13.5 (H2O, 20°C)
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.02 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
UN No.: 3264 pH: (H2O, 20°C) Density: 1.038 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
CertiPUR® Sodium Carbonate Volumetric Standard
MilliporeSigmaSecondary reference material for acidimetry, traceable to NIST SRM Certipur® volumetric standards for reliable results in titration Proper titer determination is an important prerequisite for accurate and comparable analysis in the titration laboratory. Influential factors such as…
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
SOLu-Trypsin
MilliporeSigmaSOLu-Trypsin (EMS0004) is our exclusive, Advanced Proteomics Grade enzyme that is solution stable for mass spectrometry. Designed to be stable in solution when refrigerated, SOLu-Trypsin can be used immediately without preparation. Other forms of trypsin require thawing or reconstitution, and must…
-
Arsenic ICP Standard
MilliporeSigmaFormula: As in 3% HNO3 Formula Weight: N/A Description: Composition: H3AsO4 in HNO3 2-3%
-
Certipur® Nickel ICP Standard
MilliporeSigmaTraceable to SRM from NIST, Ni(NO3)2 in HNO3, 2-3%, 10000 mg/l Ni
-
UN No.: 2031 pH: (H2O, 20°C) Density: 1.031 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)