Standards, A, 100 mL
-
-
Antimony, plasma standard solution, Sb 1,000µg/ml
BeanTown ChemicalEC No: 231-595-7 MDL No: MFCD00134030 UN No: UN1789; Haz Class: 8; Packing Group: II Liquid, Sb in 20% HCl
-
-
-
-
-
UN No.: 1789 pH: (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.033 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
Matrix: H2O Min: >= 995 Max: =< 1005 ppm Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
-
UN No.: 1789 pH: (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.033 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
-
-
-
-
-
-
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
Matrix: H2O Min: >= 995 Max: =< 1005 ppm Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
UN No.: 3264 pH: (H2O, 20°C) Density: 1.072 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
Chloride 1000 ppm Standard Solution
GFS ChemicalsVolumetric, colorimetric or turbidimetric standard.
-
-
Ricca 10, 000 ppm As in 5% HNO3 Arsenic ICP Standard
Ricca ChemicalThe Ricca Chemical arsenic ICP standard with a composition of 93.98% water, 5.06% nitric acid and 0.96% arsenic, is suitable for use in agriculture, cleaning products, cosmetics, food, beverages and personal care applications. It can be stored at a temperature of 15 to 30 degree C.
-
-
Assurance® Grade Alternate Metals III
SPEX CertiPrepStandards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only…
-
-
-
-
-
-
spex® ICP-MS Interferents B3 with Mercury
SPEX CertiPrepOur Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2. The final ICP check, performed in our own…
-
spex ICP Alternate Interferents B
SPEX CertiPrepCLP Standards for ICP & ICP-MS Our Contract laboratory Program (CLP) standards allow you to calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2. The final ICP…