Spectrophotometer Cells/Cuvettes

Compare Tool

Select up to 3 products

HomeAll Products

Thomas® Spectrophotometer Cells/Cuvettes

1 - 15 of 15
Sort
View
Show
  • Minimum working capacity as shown in listings Cell bodies are of fused-wall construction. Matched sets are supplied in cushioned storage box. Includes Teflon® cover. 8491M18 cells require 8494J20 adapter to accommodate cells in standard cell carrier.

  • Designed for the measurement of very small samples Retain exterior dimensions of standard cells Volume range: 10 µL to 160 µL Path length: 10 mm The entrance to the sample compartment is hemispherical to eliminate sharp corners which can cause sample loss due to…

  • Disposable Methacrylate Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side Standard 10 mm Light Path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The methacrylate…

  • Made of disposable polystyrene Dimensions: 120 mm long by 3 mm diameter.500 stirrers in a polyethylene bag, 2 bags per case.

  • Cylindrical Cells End windows fused to cylindrical body, of far UV silica, range 170 to 2,600 nm With Teflon stopper; 10 mm and 20 mm have single neck, longer sizes have 2 necks Light path length and minimum sample volume given in listings

  • Disposable Polystyrene Cuvettes Convenient and affordable Save time with no cleaning required Prevent cross-contamination Useable in the range of 340 to 750 nm Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5…

  • Polyethylene Fits most standard 10 mm cuvettes Flexible fins on 8495V27 caps allow tight fit with 10 mm cuvettes from most other manufacturers.

  • Square, 10 mm Light Path Cells Outside dimensions approximately 12.5 x 12.5 x 46 mm high Light path: 10 mm, ±0.01mm Teflon® cover included Matched sets are supplied in cushioned storage box Cell bodies are of fused-wall construction Cells are usable in spectral…

  • Disposable Methacrylate Cuvettes Convenient and affordable Save time with no cleaning required Prevents cross-contamination Useable in the range of 285 to 750 nm. Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5 x 45 mm outside…

  • Disposable Polystyrene Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side. Standard 10 mm light path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The…

  • Spectrosil® Far UV Quartz window Usable range: 170 to 2700 nm ‘Z’ Dimension: 15 mm Nominal volume: 0.45 mL Feature a rectangular window in a self-masking configuration. Sample chamber (W x L x H): 4 x 10 x 11 mm. The external dimensions for Thomas No. 8495L11…

  • Jacketed for heating or cooling samples by liquid heat transfer media Ideal for study of heat effects, such as thermal denaturalization of DNA Small jacket volume minimizes undesirable heating of phototube Fits standard carriers for 10 mm square cells One-piece construction …

  • Holds 12 glass, silica or plastic disposable cuvettes (external dimensions 12.5 x 12.5 mm) Permits easy viewing of solution color to be measured Helps prevent breakage Dimensions: Approximately 6 3/4 x 2 x 1/2”H

  • With and without masking Minimum working volume 0.4 mL Spectral Range as indicated in listings Supplied with Teflon® cover The nominal working volume of this range represents only 20% of that of the standard cell with the same path length. Outside dimensions 12.5 x 12.5 x…

  • Spectrofluorometer Cells With polished bottom for excitation through floor of cell Minimum working capacity 3 mL Cells can also be used for absorption measurements through 10 mm light path Cells have all four sides and bottom polished; 8429N30 furnished with Teflon cover, N19…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.