A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

Disposable Methacrylate Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side Standard 10 mm Light Path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The methacrylate…

The Specac omni-cell spacer is designed to use inside a sealed cell to permanently attach to the demountable windows.

Square, 10 mm Light Path Cells Outside dimensions approximately 12.5 x 12.5 x 46 mm high Light path: 10 mm, ±0.01mm Teflon® cover included Matched sets are supplied in cushioned storage box Cell bodies are of fused-wall construction Cells are usable in spectral…

Fiber optic probes enable fast accurate measurements, improving your workflow and productivity, and eliminating the need for expensive cuvettes. Agilent offers a comprehensive range of fiber optic measurement probes, couplers, shields and tips for Versa/Dip probes used with Cary UV-Vis systems. …

Minimum working capacity as shown in listings Cell bodies are of fused-wall construction. Matched sets are supplied in cushioned storage box. Includes Teflon® cover. 8491M18 cells require 8494J20 adapter to accommodate cells in standard cell carrier.

Designed for the measurement of very small samples Retain exterior dimensions of standard cells Volume range: 10 µL to 160 µL Path length: 10 mm The entrance to the sample compartment is hemispherical to eliminate sharp corners which can cause sample loss due to…

Black anodized aluminum spacers are available in three sizes for use with 1, 2, and 5mm path length cells, supporting them in a normal 12.5 x 12.5mm holder where there is no cell holder path length adjustment facility.

Polystyrene Macro Cuvette Ideal for enzymatic determinations, since the very thin walls enable rapid and uniform tempering Manufactured from crystal clear polystyrene Characterised by minimal light scatter with high transmission Volume: 4 ml Applicable wavelength range: 340 nm…

Designed to improve the safety of sample handling for the investigation of volatile, air-sensitive and toxic compounds Precision grade NMR tubes Available in 7, 8 and 9 inch lengths Condensing takes place directly into the NMR tube using vacuum techniques. HI-VAC® valve allows…

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

Spectrofluorometer Cells With polished bottom for excitation through floor of cell Minimum working capacity 3 mL Cells can also be used for absorption measurements through 10 mm light path Cells have all four sides and bottom polished; 8429N30 furnished with Teflon cover, N19…

The Agilent Technologies temperature probe holder is suitable for use in 10 mm standard rectangular cuvettes. Application: For Use in Standard 10 mm Rectangular Cuvettes This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Labnet 2.5 mL semi-micro vis range cuvette is made of durable materials and meet all your laboratory requirements.

Matched pair, stoppered with PTFE stopper supplied, Compatible with Agilent Cary Eclipse Fluorescence spectrophotometer. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

M6 threaded inlet and outlet ports, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Optical filters and filter kits for Agilent UV-Vis spectrophotometers. Kits include holmium oxide/didymium glass filters (uncertified) for confirming wavelength accuracy, neutral density filters for testing photometric linearity and attenuator filter kits for attenuating high absorbance at visible…

M6 threaded inlet and outlet ports, inlet/outlet tubes 400 mm length, Compatible with Agilent Cary 50/60 UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Quartz, rectangular aperture 6 x 3 mm, M6 threaded inlet and outlet ports, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For…

BRAND plastic cuvettes are an excellent choice for most spectrophotometry applications in the visible range. Manufactured from polystyrene (PS), they provide accurate, reliable results, even at wavelengths as low as 300nm. BRAND plastic cuvettes are compatible with most spectrophotometers and…

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

The W100 Optical Glass are standard spectrophotometer cells. 12.5mm x 40mm, for use from 340nm to 2500nm (visual and near to medium infra red). These cells are for use in a standard sized spectrophotometer, but can be used in PFX instruments when the 12.5mm cell is needed.

Disposable Polystyrene Cuvettes Convenient and affordable Save time with no cleaning required Prevent cross-contamination Useable in the range of 340 to 750 nm Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5…

Quartz, round aperture 3mm diameter, M6 threaded inlet and outlet ports, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For…

Until recently, flow-through cells had measuring chambers that were either rectangular or circular in shape. These shapes were dictated by limitations in the manufacturing process and did not offer the best geometry for clean flushing and reduction of contamination. Now Agilent has developed new…

Synonym: cuvette, plastic cuvette, plastic cuvettes Compatibility Not compatible with some organic solvents or strong acids. General Description These cuvettes have four optically clear sides. Note: polystyrene and polymethacrylate cuvettes are incompatible with some organic…

Deuterium and Visible source lamps provide good intensity over the widest possible wavelength range, plus optimum stability to ensure the best performance with Agilent UV-Vis and UV-Vis-NIR systems. They are selected by our QC process to ensure the optimum lifetime. Application: For Cary…

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

The Specac accessory is suitable for use with infrared spectroscopy omni cell systems. It is mainly used in research facilities and chemical laboratories. It ensures best quality, reliability and enhanced durability.

Disposable Polystyrene Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side. Standard 10 mm light path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The…