Spectrophotometer Cells/Cuvettes

Compare Tool

Select up to 3 products

HomeAll Products

Spectrophotometer Cells/Cuvettes

1 - 32 of 184
Sort
View
Show
  • Vis Cuvettes

    Eppendorf

    Semi-micro cuvettes Vis 300 nm-900 nm, plastic cuvette for measurements in the visible range, max. Filling capacity 3.0 mL, 10 × 100.

  • Cuvette Caps, Square, Tight Fit, Cs.1000

    Thomas®

    Polyethylene Fits most standard 10 mm cuvettes Flexible fins on 8495V27 caps allow tight fit with 10 mm cuvettes from most other manufacturers.

  • Sample Cells, 1" Round

    Hach

    Ideal for use with DR/2400 and DR/2500 spectrophotometers. Two 25 mL, 1 inch round glass sample cells with caps (10, 20, and 25 mL marks) and four 10 mL, 1 inch round glass sample cells with caps.

  • Sample Cell, 1” Round Glass, 10 mL

    Hach

    Comes as a set of 6 with caps

  • Sample Cell: 1 Square Glass 10 mL matched set of 8

    Hach

    Comes as a matched set of 8 cells. Use in Combination with Hach Spectrophotometers

  • Scienceware® In-Line Equilibrium Cell

    Bel-Art Products

    Five In-Line Cavities Each half cavity has a top opening for introduction or withdrawal of solutions and holds 1ml in each half cell. Clear acrylic construction with 7 stainless steel screws and wing nuts for clamping cells and dialysis membrane Cavity plug screws are Teflon®…

  • Macro Cells

    Agilent Technologies

    The macro cell which is defined by DIN 58963 as a rectangular cell with an inner width greater than 5 mm has emerged as the standard for photometry. The most widely used macro cell is a rectangular cell with outer dimensions of 45 x 12.5 mm (height x width). The length of the cell is dependent on…

  • Cuvette Holder, Pk. 5

    Thomas®

    Holds 12 glass, silica or plastic disposable cuvettes (external dimensions 12.5 x 12.5 mm) Permits easy viewing of solution color to be measured Helps prevent breakage Dimensions: Approximately 6 3/4 x 2 x 1/2”H

  • NMR Tube 3mm 7" Cs5

    DWK Life Sciences (Kimble)

    100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming…

  • Sample Cell: 1 Round Plastic 10mL with 1cm Pathlength

    Hach

    Sample cell, 1" round plastic. Comes as a set of 2 with screw caps Used with DR/800 series colorimeter and select pocket colorimeter instruments 1 cm pathlength 10mL

  • Sample Cell: 1 Square Glass

    Hach

    Sample Cell: 1 Square Glass 10mL & 25mL for DR/4000.

  • Cuvette for Hitachi® 704 and 705

    Globe Scientific

    Globe Scientific's 8-place Cuvette segments are designed for use on the Hitachi® 704 and 705 analyzers.

  • Thomas Fluorescence Spectrophotometer Cells

    Thomas®

    Spectrofluorometer Cells With polished bottom for excitation through floor of cell Minimum working capacity 3 mL Cells can also be used for absorption measurements through 10 mm light path Cells have all four sides and bottom polished; 8429N30 furnished with Teflon cover, N19…

  • Standard Rectangular Spectrophotometer Cells w/ Graded Seal

    Varsal

    A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

  • Rectangular Cells

    Thermo Scientific UV-Vis

  • Cylindrical Cells, Long Pathlength

    Starna Cells

    Physical Configuration: Cylindrical cell Primary use: Absorbtion measurement with low absorbing samples Clear windows: Two Instrument: Can be used with spectrophotometers that can use cylindrical cells Pathlengths available: 50, 100mm Cell top: PTFE stopper with "ground…

  • NMR Tube 3mm 8" Cs5

    DWK Life Sciences (Kimble)

    Our KIMAX®-HQ NMR tubes are our highest quality NMR tubes and are 100% gauged for wall thickness, concentricity and camber specifications. Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Wall thickness 0.284 mm …

  • Semi-Micro Cells with Frosted Walls and Lid

    Labomed

    Labomed, Inc.’s cuvettes are essential items to use with all spectrophotometers. Our cuvettes offer reliable functioning in all spectrophotometer environments and uses, with a wide variety of sizes and specifications to meet any requirements. We offer standard, micro, semi-micro, ultra micro,…

  • DiluCell™

    Implen

    Automatic Sample Dilution Previously it was necessary to use standard cuvettes with a volume of at least 1 ml and additionally to dilute the sample manually. DiluCell™ from Implen allows for lower sample volume requirements and provides automatic virtual sample dilution. Due to the…

  • Sub Microliter Cell for NanoPhotometer®

    Implen

    Easily convert your NanoPhotometer® C40 cuvette spectrophotometer into a nanovolume spectrophotometer with the sub-micro liter cell from Implen. With as little as 0.3 µl sample volume, samples can now be virtually diluted and analyzed directly. There are a variety of path-lengths…

  • Micro Spectrophotometer Cells w/lid

    Varsal

    A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

  • Ultra-Micro Cells

    Agilent Technologies

    These cells are specifically designed for use in the µL range (down to 50µL). These cells fit into any standard cell holder and have the advantage of requiring much smaller sample volumes than standard cells. The cells are constructed so that filling and emptying can be easily accomplished with…

  • Standard Cells with Lids

    Labomed

    Labomed, Inc.’s cuvettes are essential items to use with all spectrophotometers. Our cuvettes offer reliable functioning in all spectrophotometer environments and uses, with a wide variety of sizes and specifications to meet any requirements. We offer standard, micro, semi-micro, ultra micro,…

  • Turbiquant® Lamp

    MilliporeSigma

  • Standard Rectangular Spectrophotometer Cells w/Lid

    Varsal

    A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

  • Standard Rectangular Spectrophotometer Cells w/stopper

    Varsal

    A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

  • NMR Tube 3mm 8" Cs5

    DWK Life Sciences (Kimble)

    100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM…

  • 10mm Quartz 8 matched standard cell pack of 8

    Biochrom, Ltd

  • Accessories for BRAND UV-Cuvette Disposable Spectrophotometer/Photometer…

    BrandTech®

    Caps for Ultra-Micro cuvettes Cuvette rack

  • Semi-Micro Cells with Black Walls and Teflon Stopper

    Labomed

    Labomed, Inc.’s cuvettes are essential items to use with all spectrophotometers. Our cuvettes offer reliable functioning in all spectrophotometer environments and uses, with a wide variety of sizes and specifications to meet any requirements. We offer standard, micro, semi-micro, ultra micro,…

  • Cuvette for Hitachi® 902

    Globe Scientific

    Globe Scientific's 8-place Cuvette segments are designed for use on the Hitachi® 902 analyzer.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.