Solutions, S, Bottle, Poly
-
Composition: Water 97.52%, Sulfuric Acid 1.26%, Phosphoric Acid 1.03%, Sodium Diphenylaminesulfonate 0.19% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Light olive green liquid Physical State: Liquid Solubility Information: Miscible Shelf…
-
Sodium Hydroxide 1% w/v
ExaxolThe Exaxol 1% sodium hydroxide features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only
-
Ricca Sodium Hydroxide - EDTA Solution
Ricca ChemicalThe Ricca Chemical sodium hydroxide - EDTA solution with a composition of 71.16% water, 28.57% sodium hydroxide, 0.26% ethylenediaminetetraacetic acid (EDTA), disodium salt and dihydrate, is suitable for research and laboratory use. It can be stored at a temperature of 15 to 30 degree C.
-
Sulfuric Acid 0.250N
ExaxolThe Exaxol 0.25N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Ricca 0.200 Molar (M/5) Sodium Acetate
Ricca ChemicalSodium acetate, CH3COONa, also abbreviated NaOAc, is the sodium salt of acetic acid. This colorless deliquescent salt has a wide range of uses.
-
Ricca 50% (w/w) (760 g/L) Sodium Hydroxide
Ricca ChemicalThe Ricca Chemical sodium hydroxide is widely used in biochemistry industry and is useful for neutralization of acids. It is a basic solution and has the ability to raise pH of chemical solutions. This neutralization agent is perfect for use in the chemical industry, paper making, petroleum…
-
Sodium Hydroxide Solution C(Naoh) = 4 Mol/L (4 N) Titripur
MilliporeSigmaUN No.: 1824 pH: 14 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.15 g/cm3 (20°C) Ignition Point: 14 (H2O, 20°C)
-
Sulfate Standard Stock Solution, 1000 ppm SO4 2-
Ricca ChemicalReference Method Reagent Name EP (Euopean Pharmacopiea) Standard Solutions for Limit Tests Sulphate stock solution (0.181 g K2SO4 in 100 mL), for preparation of R 5002800 & R 5002802
-
Ricca Sodium Carbonate
Ricca ChemicalSodium Carbonate is used as a basimetric standard but it is not a very good primary standard since it is difficult to dry, is hygroscopic, and has a relatively low equivalent weight. For these reasons, Tris(hydroxymethyl)aminomethane has largely replaced it as a basimetric standard. Sodium…
-
Ricca 25% v/v Sulfuric Acid
Ricca ChemicalSulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.
-
Ricca Soap Solution
Ricca ChemicalThe Ricca Chemical soap solution helps in minimizing the surface tension of water thus making it ideal to wet and clean dirty surfaces. Soap solution is derived from fatty acids and is used extensively for cleansing and lubricating products.
-
Ricca Saccomanno Collection Fluid
Ricca ChemicalThe Ricca Chemical saccomanno collection fluid is perfect to use for the fixation process of cytology specimens including fine needle aspirates, urine, sputum and bronchial washings and pleural and peritoneal fluids. Fixative and preservative for sputum samples
-
Ricca 2.00 Normal Sodium Thiosulfate
Ricca ChemicalThe Ricca Chemical sodium thiosulfate with a composition of 59.02% water, 40.65% sodium thiosulfate pentahydrate and 0.33% sodium carbonate, is suitable for use in analytical chemistry analysis. It is used in water treatment process and is used to treat cyanide poisoning. It can be stored at a…
-
Sodium Carbonate 0.0200 N
ExaxolThe Exaxol 0.0200 N sodium carbonate is suitable for use as a reagent in qualitative and quantitative chemical analysis. It is mainly used in manufacturing of soaps and detergents. Sodium carbonate is used in water softening as well as glass manufacturing. It also acts as an acidity regulator and…
-
Sodium Chloride 0.85% w/v
ExaxolThe Exaxol 0.85% sodium chloride features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Aqueous normal saline solution
-
Sulfuric Acid 1.0N
ExaxolThe Exaxol 1N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Ricca Saturated 32.5% (w/v) Sodium Chloride
Ricca ChemicalThe Ricca Chemical sodium chloride with a composition of 72.92% water and 27.08% sodium chloride, is suitable for use in plastic, paper, rubber, glass, soap, detergent and dye industries. It also plays a major role in medical treatments. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 30% (w/v) Sodium Citrate
Ricca ChemicalSodium citrate is the sodium salt of citric acid. It is white, crystalline powder or white, granular crystals, slightly deliquescent in moist air, freely soluble in water, practically insoluble in alcohol. Like citric acid, it has a sour taste. From the medical point of view, it is used as…
-
Sodium Hypochlorite, 5%, Volumetric
Reagents®Composition: Water 94%, Sodium Hypochlorite 6% Boiling Point: Approximately 40°C Density: 1.11 Melting Point: Approximately 0°C Color: Colorless to greenish-yellow liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient DOT: UN1791,…
-
Sulfuric Acid 4.0N
ExaxolThe Exaxol 4N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Sodium Sulfate 22.2% w/v
ExaxolThe Exaxol 22.2% sodium sulfate with a heavy metal-free formulation comes in a poly bottle and is an ideal solution to have in chemical laboratories and research facilities. Application: For Laboratory use only
-
Ricca 0.01 N Silver Nitrate
Ricca ChemicalSilver Nitrate solutions are used almost exclusively for the determination of Halides, i.e., Chloride, Bromide and Iodide. Silver Nitrate solutions can be standardized potentiometrically, or by using the Mohr method or the Volhard method.
-
Ricca Simulated Intestinal Fluid (without Pancreatin)
Ricca ChemicalThe Ricca Chemicals simulated intestinal fluid (without pancreatin) is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Sodium Hydroxide 0.100N
ExaxolThe Exaxol 0.1N sodium hydroxide features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C…
-
Ricca Sodium Hydroxide Solution
Ricca ChemicalThe Ricca Chemical 1 Liter sodium hydroxide solution is a commonly used chemical in households, factories and manufacturing industries. This chemical is mainly used for the production of soaps, rayon and petroleum products. It is also used for the processing of cotton, metal cleaning,…
-
Sulfuric Acid 6.0N
ExaxolThe Exaxol 6N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Sulfuric Acid 12.0N
ExaxolThe Exaxol 12N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Ricca 5 Molar Sodium Chloride
Ricca ChemicalThe Ricca Chemical sodium chloride with a composition of 75.40% water and 24.60% sodium chloride, is suitable for use in plastic, paper, rubber, glass, soap, detergent and dye industries. It also plays a major role in medical treatments. It can be stored at a temperature of 15 to 30 degree C.
-
Sodium Carbonate 1.00N
ExaxolThe Exaxol 1N sodium carbonate features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 laboratory
-
Sodium Thiosulfate 0.250 N
ExaxolThe Exaxol 0.25N sodium thiosulfate features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg…
-
Ricca Silica Standard
Ricca ChemicalThe Ricca Chemical 1 Liter silica standard is perfect for the analysis and detection of various liquids samples in chemical laboratories.
-
Sulfuric Acid 25% v/v
ExaxolThe Exaxol 25% sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only