Solutions, E

Compare Tool

Select up to 3 products

HomeAll Products

Solutions, E

1 - 32 of 245
Sort
View
Show

Reagents

  • Solution for pH electrode protection.

  • CAS No.: 100-41-4 Features and Benefits: 1 H sensitivity

  • MDL Number: MFCD00283162

  • For storing pH glass and combination electrodes

  • Boiling Point: 100°C Color: Colorless liquid Composition: Water 99.26%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.75% Concentration: 0.02M DOT: NOT REGULATED. Density: 1 Melting Point: 0°C Physical State: Liquid Shelf Life: 18 Months Solubility Information:…

  • Reference electrolyte for pH electrodes (3M KCl solution saturated AgCl, 30 mL).

  • This pH optimized saturated salt solution is designed to keep your electrodes in good health. pH electrodes must not be stored in deionised water and should be kept in an appropriate storage solution between uses to avoid drying out which will reduce response speed and may cause them to fail.…

  • Boiling Point: 100°C Color: Colorless liquid Composition: Water 99.62%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.37%, Magnesium Chloride Hexahydrate 0.01% Concentration: 0.01M DOT: NOT REGULATED. Density: 1.02 Melting Point: 0.0°C Physical State: Liquid …

  • Etching Solution

    Reagents®

    Composition: Water 45.20%, Acetic Acid 15.31%, Hydrochloric Acid 15.28%, Nitric Acid 10.23%, Ferric Chloride Hexahydrate 8.83%, Sulfuric Acid 5.15% Density: 1.2856 Color: Orange liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient DOT:…

  • Eprinomectin solution

    MilliporeSigma

    100 ng/μL in acetonitrile, PESTANAL ® , analytical standard Synonym(s): (4'' R )-4"-(Acetylamino)-4"-deoxy-avermectin B1 solution MDL Number: MFCD07370747 Storage: 2-8°C RIDADR: UN 1648 3 / PGII

  • Concentration: 0.01M Composition: Water 99.63%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.37% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage:…

  • Concentration: 0.0575M Composition: Water 97.88%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 2.12% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible …

  • Concentration: 20% w/v Composition: Water 79.90%, Monoethanolamine 20%, Potassium Cyanide 0.10% Boiling Point: Approximately 100°C Density: 1.0024 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 10 Solubility Information: Miscible Shelf…

  • Synonyms: 3,8-Diamino-5-ethyl-6-phenylphenanthridinium bromide; EtBr; Homidium bromide Formula: C21H20BrN3 Formula Weight: 394.31 CAS No.: 1239-45-8 Application: Ethidium bromide (EtBr) is the most commonly used nucleic acid stain for PAGE or agarose…

  • Concentration: 0.002M Composition: Water 99.93%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.07% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 1 Month Storage:…

  • Concentration: 0.2M Composition: Water 92.55%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 7.45% Boiling Point: Approximately 100°C Density: 1.04 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf…

  • Composition: Water 86.59%, Ammonium Hydroxide 12.56%, Hydrogen Peroxide 0.85% Density: 0.96 Color: Colorless liquid Physical State: Liquid pH Range: >11.5 Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient Chemical: 500mL DOT: UN3266, CORROSIVE LIQUID, BASIC,…

  • If you have ever questioned the result of an analytical test, you'll immediately appreciate the value of using standard solutions. These solutions contain a defined concentration of analyte, allowing you to quickly verify that instrument operation, reagent performance, and variations in operator…

  • Electrode cleaning solution to remove mineral contaminations/deposits from pH sensing element. 500 mL bottle.

  • analytical standard, 2000 μg/mL in methanol, ampule of 0.5 mL Storage: −20°C RIDADR: UN 1230 3/PG 2

  • EDTA (Ethylenediaminetetraacetic acid)

  • Composition: Pyridine 80.86%, Phthalic Anhydride 16.57%, Imidazole 2.57% Density: 1.0353 Color: Colorless to slightly yellow liquid Physical State: Liquid Shelf Life: 12 Months Storage: Ambient DOT: UN1282, PYRIDINE SOLUTION, 3, P.G. II

  • pH electrode storage solution. Contains potassium chloride and has a pH near 7.

  • Color: Colorless liquid Composition: Water 90.52%, Sulfuric Acid 8.47%, Acetic Acid 1.01%, Sodium Chloride 0% DOT: UN3264, CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (SULFURIC ACID, ACETIC ACID), 8, P.G. III Density: 1.04 Physical State: Liquid Shelf Life: 12 Months Solubility…

  • Boiling Point: 100°C Color: Colorless liquid Composition: Water 92.32%, Aluminum Potassium Sulfate Dodecahydrate 7.19%, Sodium Chloride 0.50% DOT: NOT REGULATED. Density: 1.04 Melting Point: 0°C Physical State: Liquid Shelf Life: 24 Months Solubility Information: Miscible Storage: Ambient

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.