Chemicals Solutions C
-
Potassium Chloride Conductivity Standard, 700 µS/cm at 25°C
Ricca ChemicalYou will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Ricca Congo Red Indicator
Ricca ChemicalThe Ricca Chemical congo red indicator is used as an acid-base indicator and helps in staining tissues for microscopic examination. This indicator turns red when used with alkalis and turns blue when used with acids.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Conductivity Standard 700 µS/cm
Reagents®Composition: Water 99.96%, Potassium Chloride 0.04% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
Conductivity Standard, 180 µS/cm at 25°C
Ricca ChemicalYou will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Ricca Potassium Chloride Reference Solution D
Ricca ChemicalThe Ricca Chemical 500 mL potassium chloride reference solution D with composition of 92.90% water and 7.10% potassium chloride is suitable for use in electrolytic conductivity measurements and laboratory routines. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca Chlorine Water
Ricca ChemicalThe Ricca Chemical chlorine water acts as a bleaching agent for the manufacture of paper and cloth in the textile industry. Chlorine also helps in the purification of water and plays an important role in the sanitation process of industrial waste.
-
Ricca Potassium Chloride Reference Solution D
Ricca ChemicalThe Ricca Chemical 1 Liter potassium chloride reference solution D with composition of 92.90% water and 7.10% potassium chloride is suitable for use in electrolytic conductivity measurements and laboratory routines. It can be stored at a temperature of 15 to 30 degree C.
-
-
Ricca Copper Sulfate
Ricca ChemicalThe minimum requirement of the American Association of Blood Banks (AABB) and the Food and Drug Administration (FDA) for suitable blood donors is 12.5 g/dL hemoglobin level or 38% packed cell volume (hematocrit) for fingerstick or venipuncture sampling methods. Copper Sulfate Solution, Specific…
-
Cyclohexylamine, 0.50N, Standardized
Reagents®Concentration: 0.5N (N/2) in Methanol Composition: Methyl Alcohol 93.68%, Cyclohexylamine 6.32% Density: 0.8 Color: Colorless liquid Physical State: Liquid Flash Point: 12°C Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient DOT: UN2924, FLAMMABLE LIQUIDS,…
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Copper Sulfate 0.05M
ExaxolThe Exaxol 0.05 M copper sulfate is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory …
-
Cyclopropylzinc bromide solution, 0.5 M in THF
MilliporeSigmaCAS Number: 126403-68-7 Formula: C3H5BrZn Formula Weight: 186.37 Linear Formula: C3H5BrZn MDL No.: MFCD08741505 Density: 0.969 g/mL at 25 C Storage: 2-8C UNSPSC Code: 12352103 Application: Active nucleophile in Pd-catalyzed cross-coupling of heteroaryl halides.
-
Conductivity Standard, 2500 µS/cm at 25°C
Ricca ChemicalYou will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
-
Ceric Sulfate, 0.2500n Solution
GFS ChemicalsCerium(IV) sulfate, also called ceric sulfate, is an inorganic compound. These salts are solids that are soluble in water and dilute acids. Solutions of ceric sulfate have a strong yellow color. Ceric Sulfate is a powerful and versatile oxidizing agent that possesses certain advantages over…
-
Chlorhexidine digluconate solution
MilliporeSigmapharmaceutical secondary standard; traceable to USP and PhEur Synonym(s): 1,6-Bis(N 5 -[p-chlorophenyl]-N 1 -biguanido)hexane; 1,1'-Hexamethylenebis(5-[p-chlorophenyl]biguanide) MDL Number: MFCD00083599 RIDADR: UN 3082 9 / PGIII
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Concentration: 0.5% w/v Composition: Water 99.50%, Cobalt Thiocyanate 0.50% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Red liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: NOT REGULATED.
-
-
Calcium Calibration, Standard
Reagents®Concentration: 1000ppm Composition: Water 99.63%, Calcium Chloride Dihydrate 0.37% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid pH Range: 5 to 8 Solubility Information: Insoluble Synonyms: Stock Calibration Solution Shelf…
-
Conductivity Standard 10,000 µS/cm
Reagents®Composition: Water 99.42%, Potassium Chloride 0.58% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 18 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
Potassium Chloride Conductivity Standard, 718 µS/cm at 25°C
Ricca ChemicalYou will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
The LabChem 0.02 M calcium chloride is non-flammable in nature and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Ceric Sulfate, 0.10N, Standardized
Reagents®Concentration: 0.1N Composition: Water 87.08%, Sulfuric Acid 8.06%, Ceric Sulfate 4.86% Boiling Point: Approximately 100°C Density: 1.09 Melting Point: Approximately 0°C Color: Orange liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months …
-
Application: Special non-enzymatic formulation for gently dislodging adherent cell types from plastic or glass surfaces. Storage: 2-8°C
-
Synonyms: Collagen from rat tail CAS Number: 9007-34-5 MDL No.: MFCD00130825 Storage: 2-8C EC Number: 232-697-4 UNSPSC Code: 12352200 Application: Used as a coating material to support adherent cells growth and differentiation. Preparation Note: Sterile solution prepared from…
-
Conductivity Standard, 10,000 uS/cm
GFS ChemicalsMade from potassium chloride. Conductivity 10,000 +/- 100 uS/cm NIST Traceable
-
Synonym(s): Clostridiopeptidase A CAS No.: 9001-12-1 Application: Collagenase products offered by Sigma-Aldrich are prepared from culture supernatants of C. histolyticum . Most preparations contain collagenase, non-specifc protease, and clostripain activities. These enzymes act…