Shelving

Compare Tool

Select up to 3 products

1 - 32 of 73
Sort
View
Show
  • Undermount Brackets

    INSTOCK Labs

    Undermount brackets can be used with island stanchions or wall standards to support shelves. Brackets are of a 14 gauge steel construction.

  • Adds convenient space above a storage unit. Drop mat design creates a retaining ledge around the entire 12" (305mm) deep shelf. Remember to order rear posts taller than front posts to accommodate these shelves.

  • Reagent poles are 1" diameter painted steel poles that are threaded at both ends. Poles bolt through the work surface for secure mounting. Reagent poles can stack to create tiered phenolic resin shelves in the center of the bench. Hardware is included for each installation. …

  • Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items.

  • Stainless Steel Four-Shelf Starter Unit, Patented QuadTruss® design wire shelves with numerically calibrated grooved posts in 1" increments, leveling feet and tapered split sleeves

  • Phenolic Shelving

    INSTOCK Labs

    Shelving is 1" thick black phenolic resin with a finished front edge. These shelves can be used with wall standards or island stanchions. Other sizes and configurations are available upon request.

  • Perfect for applications involving spillage. Provides barrier between the floor and the bottom shelf contents to deter contamination. Features a 1/8" raised "ship's edge" on all four sides to contain spills. Type 304 stainless steel construction with epoxy-coated…

  • Bookend Brackets

    INSTOCK Labs

    Bookend brackets can be sued with island stanchions or wall standards to support shelves. Brackets are of a 14 gauge steel construction.

  • Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items. Type 304 Polished Stainless Steel finish addresses the most aggressive…

  • Steel Wire Shelving

    Intermetro

    Super Erecta® steel shelving units are easily assembled without tools and are ideal for laboratory, cold box and clean-room storage applications Each Convenience Pak includes: four shelves, four split posts, split sleeves and leveling bolts Zinc plated with a clear lacquer coating Shelving…

  • SiteSelect posts provide a visual guide for positioning and adjusting shelves. An easy-to-identify double groove every 8" offers a quick way to align all shelves. Stationary posts include an adjustable leveling foot. Mobile posts come without leveling bolt assembly to accommodate stem…

  • Easy "no-tool" shelf adjustment. Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items. Corrosion resistant Metroseal…

  • Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items.

  • Easy "no-tool" shelf adjustment. Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items. Type 304 Polished Stainless…

  • Easy "no-tool" shelf adjustment. Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items.

  • Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items. Corrosion resistant Metroseal Gray epoxy finish features Microban…

  • Oval Rail 48" with mounting holes at 16" centers. Attach the oval horizontal rail at an appropriate height. Take the wall’s inner structure into account. Hang the upright profiles on the horizontal rail, using the hardware supplied. The horizontal rail makes it easy to install…

  • Notched shelving is 1" thick black phenolic resin with a finished front edge. These shelves are notched to create a pass-thru shelf. They are suited for use with island stanchions. Other sizes and configurations are available upon request.

  • Rear Retaining Lips

    INSTOCK Labs

    Rear retaining lips provide a 1" rear lip for island or peninsula shelving when used with 1" thick phenolic resin shelves. They attach to the bottom of the shelf. Rear retaining lips are of a painted steel 16 gauge steel construction. Other sizes are available upon request.

  • Wall Mounted Shelving

    Eagle Group

    Choose shelf size and appropriate depth of wall bracket; two wall brackets required per shelf; wall bolts not included. Wall bolts must be selected according to wall type.

  • Wall Standards

    INSTOCK Labs

    Double slotted wall standards are to be used for wall shelving. They vary lengths depending on how many shelves are needed. These are to be used with shelving brackets and shelves. They are of 11 gauge steel construction and 1/2" deep.

  • Stationary wire epoxy coated shelving is furnished in metroseal 3 epoxy. Corrosion resistant finish for wet or high humidity environments. Each unit includes 4 posts, 4 shelves and split-sleeves to attached shelves to posts. Open wire design minimizes dust accumulation and allows circulation for…

  • Help protect contents from dust and other airborne contaminants. This allows units to be loaded and stored for longer periods of time before being transported. Covers also deter pilferage. Reinforced corners help prevent tears and add greatly to durability of covers. Available in machine-washable,…

  • Help protect contents from dust and other airborne contaminants. This allows units to be loaded and stored for longer periods of time before being transported. Covers also deter pilferage. Reinforced corners help prevent tears and add greatly to durability of covers. Available in machine-washable,…

  • Stationary wire chrome shelving is made of carbon steel. Each unit includes 4 posts, 4 shelves and split-sleeves to attached shelves to posts. Open wire design minimizes dust accumulation and allows circulation for air. Shelves can be adjusted at 1" intervals along entire height of the post.…

  • 48" vertical upright tube for wall shelving. Vertical rails are easily assembled by hanging rail on horizontal wall shelving rail. Easily adjust spacing anywhere along vertical rails by sliding rail into position. Attach shelves, bin rails, cabinets, etc to vertical tubes for a complete wall…

  • Similar to 8870J70 Series but with casters Post height is 63”; overall height is 69” The four shelves are adjustable on one inch centers. Each shelving cart has four resilient rubber swivel casters; two with brakes. Capacity is 600 lbs. per cart.

  • Highest capacity storage for motors, dies and heavy machine parts. Up to 3,250 lbs. per shelf! Boltless assembly. Shelves snap into place and adjust at 1 1/2" increments. Four-way access for easy loading and unloading. 14-gauge steel posts; 16-gauge steel shelves. Tough,…

  • Mobile Wire Shelving

    INSTOCK Labs

    Mobile wire chrome shelving is made of carbon steel. Each unit includes 4 posts, 4 shelves and split-sleeves to attached shelves to posts. Open wire design minimizes dust accumulation and allows circulation for air. Shelves can be adjusted at 1" intervals along entire height of the post. Shelves…

  • Help protect contents from dust and other airborne contaminants. This allows units to be loaded and stored for longer periods of time before being transported. Covers also deter pilferage. Reinforced corners help prevent tears and add greatly to durability of covers. Available in machine-washable,…

  • Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items. Corrosion resistant Metroseal Green epoxy finish features Microban…

  • Island Stanchion

    INSTOCK Labs

    Double slotted island stanchions are to be used in an island shelving situation. Construction out of 11 gauge steel. All mounting hardware is included. These are to be used in conjunction with island cross members, shelving brackets and shelves.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.