Digital Light Duty Orbital Shakers You Can Trust for Everyday Shaking Endeavor™ Light Duty Shakers are available in 3 models: 3 mm orbit, 20 mm orbit, or dedicated microplate model. All models can be used in incubators and cold rooms. Stable, accurate, long-term shaking is ensured with the…

Test Tube Racks - Half Size, Stationary PVC coated steel Includes hardware for easy attachment to platforms 7L x 5W x 4H" (12.7 x 17.8 x 10.2cm) / Micro-Tube Rack:1.7H" (4.3cm) Test Tube Racks - Full Size, Stationary PVC coated steel Includes hardware for easy attachment to…

Choose from Four Models for Light Duty Shaking Light Duty Shakers are designed for applications with loads under 8 lb. Choose from two orbits and speed ranges to optimize your sample mix. Microprocessor-controlled and available as an analog model with basic speed control, two digital models…

General purpose shaker Displays for speed and time 3mm or 15mm orbit 2 year warranty Talboys Advanced 1000-3 and 1000-15 Orbital Shakers are ideal for a wide variety of shaking applications. Tray includes a non-skid rubber mat. Remove mat to mount a variety of optional flask clamps…

Test Tube Racks - Full Size, Pivoting Adjustable angle, custom tilt Stainless steel holder includes removable rack Inside Rack Holder: 5.1L x 10.8W x 3.9H”(12.9 x 27.4 x 9.9cm) Outer Rack Housing: 5L x 10.9W x 5H” (12.7 x 27.6 x 12.7cm) Thomas No. 1217R41…

Vertical and horizontal wave motion Displays for speed/tilt angle and time Timer with audible alarm 2 year warranty The Talboys 1000WS Waving Shaker provides precise speed control and a smooth, low foaming, three dimensional, "wave" motion. Ideal for use in a wide range…

Universal Platforms Allows for mounting of flask clamps, test tube racks, and bottle clamps Platform slides over top of included tray and is tightened with adjustment screws Optional accessories screw directly into mounting point openings Two-tier braces allow stacking of platforms with a…

Culture Platforms Ideal for slow speed applications; Petri dishes, culture flasks, and other flat bottom, low profile vessels Two-tier braces (available for both sizes) allow stacking of platforms with a 10" clearance Constructed of type 304 stainless steel Platform has a…

Accessories for Thomas vortex mixers include a variety of tube holders, vessel holders, ampule tube holders, single tube holders, a tube holder kit with retainer and a microtube and microwell plate holder kit with retainer. Foam Insert Kit with Retainer (8294B46) includes an insert retainer, vessel…

Easiest to Use in the Market with Onboard Adjustments for Tilt Angle OHAUS Rocking and Waving Shakers are designed for use in a range of lab applications in a variety of environmental conditions. Rocking Shakers provide a seesaw-like motion, while Waving Shakers offer a smooth, low-foaming,…

Electronic tilt adjustment Displays for speed/tilt angle and time Timer with audible alarm 5 year manufacturer warranty The Talboys Advanced 1000RS Rocking Shaker is ideal for cell culture work and is designed to be used in a variety of environmental conditions Operating…

1218B18 Foam Insert Blank Ideal for custom applications. Can be cut or drilled to fit your specifications. Requires universal holder. 1218B19 Cup Head Designed for mixing 1 tube at a time. 1218B20 Large Vessel Holder - 0.5 and 1L Flasks Rubber holder secures 500mL and 1000mL…

Hands-free vortexing of up to 50 tubes Automatic timer Electronic speed control Thomas multi-tube vortexer can handle up to 50 tubes. Speed is adjustable from 1200 to 2400 rpm with electronic speed control. Built-in timer is adjustable from one second to one minute or continuous operation.…

Separatory Funnel Platform Holds 3 funnels at once on an 18 x 18" (45.7 x 45.7cm) platform Accommodates 500mL to 2L separatory funnels Stainless steel construction

Allows for mounting of flask clamps, test tube racks, and bottle clamps Platform slides over top of included tray and is tightened with adjustment screws Optional accessories screw directly into mounting point openings> Two-tier braces allow stacking of platforms with a 10" clearance…

The Advanced 3750 Reciprocating Shaker is designed for a wide range of applications including cell cultures that require accurate and repeatable results. The microprocessor control provides consistent uniform shaking while safely ramping to the set speed: Used in cell cultures, solubility studies…

Extreme Environment Shakers Designed for use in CO2 Incubators Can withstand extreme environments up to 100% humidity Remote controller magnetically attaches to most The OHAUS Extreme Environment Orbital Shaker is designed for a wide range of applications including cell…

Variable control for speed, tilt and time 16lb capacity Two-tier model doubles workable capacity The Talboys Analog Rocking Shaker is an easy and economical option for all of your rocking needs. The Rocking Shaker is ideal for cell culture and blotting applications and is designed to…

PVC Flask Clamps Autoclavable One piece, molded PVC construction Will not scratch or mark flask like other clamps Includes hardware for easy attachment to platforms Attaching and removing of flasks is quick and easy

Dedicated Platforms Pre-mounted flask clamps for maximum utilization of platform space for flasks of all one size Two-tier braces allow stacking of platforms with a 10" clearance (available for select sizes*) Platform is constructed of type 304 stainless steel Flask clamps…

Adjustable Platforms Adjustable clamping bars accommodate various vessel types Stainless steel construction Base tray has a non-skid rubber surface Overall dimensions ( 1217R23 ): 18 x 18" (45.7 x 45.7cm) Overall dimensions ( 1217R24 ): 18 x 24" (45.7 x 61cm)

High Speed Microplate Shaker provides variable high speed shaking from 600 to 2500 rpm for microplates, deep well plates, and small-diameter tubes up to 5 in. (12.7 cm) tall. Independent LEDs and Touchpad Control for Speed and Time allow you to accurately reproduce the exact settings every time.

Eight Model Options to Suit the Right Capacity for Your Application With load capacities from 35 to 150 lb and over 70 accessory options, OHAUS Heavy Duty Shakers are designed to handle a range of applications. Available as analog or digital models with microprocessor control to provide…

Providing Consistent Shaking Action for a Range of Applications OHAUS Reciprocating Shakers are designed for a range of applications including cell cultures and extraction procedures that require accurate, repeatable results. Our shakers are microprocessor-controlled to provide consistent,…

All of the following accessories fit the Thomas Brand Large Digital Orbital Shaker (1231A89/90) and the Thomas Brand Large Analog Orbital Shaker (1231A87/88). Flask clamps are designed to hold Erlenmeyer flasks except for the 2.8 L clamp (1231B13), which is designed to hold a Fernbach flask. All…