Semi-pierceable, and leaves minimal residue. Polyester films just 25 mum thick, clearer and marginally pierceable with single-channel pipettes for sample recovery. Dimensions are 54.0 mm x 141.0 mm. Legal Information: ThinSeal is a trademark of Excel Scientific, Inc.

A 140 mum thick hydrophobic porous sealing film with medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal(TM) sealing films minimize cross-contamination, spillage and evaporation. They allow uniform…

XTR films offer high performance under extreme conditions. A 2 mil polyester film with a 1.65 mil layer of strong acrylic adhesive. eXTReme Seal films remove cleanly from plate surfaces without adhesive stringing, residue or contamination. Each sealing films measures 78.3 x 140.5 mm and offers…

Easily pierceable, 70 mum thick, polyethylene with acrylic adhesive, EZ-Pierce films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 mm by 142.9 mm for 96 well plates. Legal Information: EZ-Pierce is a trademark of Excel Scientific, Inc.

Consists of a rubber coated dowel with a little give. The rubber allows better conformance of the film around the well area when sealing plates (Ensures sealing film covers all wells of a multiwell plate).

A 50 mum heat-resistant polypropylene sealing film with a 25 mum layer of acrylic adhesive designed for thermal cycling applications. Each sealing film measures 79.4 x 137.8 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 123.1 mm.…

A 36 mum soft non-permeable aluminum foil sealing film with strong medical-grade adhesive, AlumaSeal® II sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 146.1 mm and offers sufficient sealing area for all PCR plates. Length…

A combination of optically transparent polyester film with a strong, ultra-smooth, non-absorbing, non-fluorescing medical-grade adhesive for superior performance in real-time PCR applications. In place of the customary paper backing, ThermalSeal RT has a plastic liner which is easily removed before…

ThermalSeal RTS(TM) sealing film is a 50 mum thick polyolefin with 50 mum inert encapsulated silicone adhesive. They are optically clear, with low autofluorescence, and are especially suited for real-time qPCR, storage, and protein crystallization applications. The encapsulated silicone adhesive is…

Eliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, bell jars, etc. Provides a vacuum-tight seal, yet will release readily even after long periods of time.

Also useful for protecting contents of plate from contamination during multiple manual reagent additions over time. X-Pierce films are 89 mum thick vinyl with a 18 mum thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96 well plates. A precut…

PARAFILM stretches up to 200% and clings even around irregular shapes and surfaces. The sealing film is free of plasticizers and consists primarily of polyolefins and paraffin waxes. PARAFILM M is resistant up to 48 hours against many polar substances, eg saline solutions, inorganic acids and…

Eliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, bell jars, etc. Provides a vacuum-tight seal, yet will release readily even after long periods of time.

A 38 mum thick aluminum sealing foil film with a 38 mum layer of acrylic adhesive for use with 384 well plates. AlumaSeal 384 sealing films have one end tab with no perforations. •Sealing film dimensions are 137.3 mm x 82.5 mm (13.5 mm end tab) •Available as non-sterile only •Pierceable …

With a 70 mum polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip…

Easily covers laboratory dishes and forms inexpensive liners for bench tops, drawers, and trays. Easy cleanup in case of spill or contamination.

BrightMax(TM) sealing films are 200 mum thick white vinyl adhesive sealing films for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax(TM)…

PARAFILM stretches up to 200% and clings even around irregular shapes and surfaces. The sealing film is free of plasticizers and consists primarily of polyolefins and paraffin waxes. PARAFILM M is resistant up to 48 hours against many polar substances, eg saline solutions, inorganic acids and…

AlumaSeal CS sealing films are a specially formulated aluminum foil with a 50 mum layer of acrylic adhesive that withstands cold storage at temperatures between: -80 C to +120 C . Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or…

ThermalSeal MiniStrips films are identical to ThermalSeal films, but designed for sealing only one or two 8 well rows at a time on PCR plates. Each film is 19.0 x 103.2 mm, including two removable positioning tabs. The long dimension with tabs removed is 82.6 mm.Note: Each package of 200 contains…

Clear peelable film with moderate solvent resistance.Features: Film, clear, peelable, good optical clarity, moderate solvent resistance, peelable, non-pierceable.Compatibility: Polypropylene (PP), Polyethylene (PE), Polystyrene (PS) & Cyclic Olefin Copolymer (COC) plates.Seal integrity range: -80C…

PARAFILM stretches up to 200% and clings even around irregular shapes and surfaces. The sealing film is free of plasticizers and consists primarily of polyolefins and paraffin waxes. PARAFILM M is resistant up to 48 hours against many polar substances, eg saline solutions, inorganic acids and…

A 50 mum heat-resistant polypropylene sealing film with a 25 mum layer of acrylic adhesive designed for thermal cycling applications. Each sealing film measures 79.4 x 137.8 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 123.1 mm.…

ThermalSeal RT2RR(TM) 50 mum polyester sealing films for real-time PCR are sized to fit within the edges of raised-rim 96 well plates. The same consistent ultra-high optical clarity as Excel's ThermalSeal RT(TM) sealing films makes possible more reproducible, reliable, and consistent DNA…

A soft aluminum foil film designed for the sealing of PCR plates minimizing evaporation and vapor loss during thermal cycling. The film pierces very easily for direct sample recovery with a multichannel pipettor or robotic metal probes without risk of aerosols, cross-contamination or significant…

Sheets pre-cut to fit standard multiwell plates. Both film and adhesive are inert and compatible with microplate procedures. Adhesive forms a tight, waterproof seal, preventing cross-contamination and evaporation. SealPlate film is 2 mil (0.05 mm) polyester, with a functional temperature range of…

A 38 mum thick aluminum sealing foil film with a 38 mum layer of acrylic adhesive for use with 96 well plates. Fits inside the rim of raised-rim plates. AlumaSeal 96 sealing films have one partial-width end tab with no perforations. •Film dimensions are 127 mm x 78 mm (9.5 mm end tab) •Available…

Also useful for protecting contents of plate from contamination during multiple manual reagent additions over time. X-Pierce films are 89 mum thick vinyl with a 18 mum thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96 well plates. A precut…

Pierceable foil seal with good solvent resistance.Features: Foil, high solvent resistance including DMSO, non-peelable, multiple sealing/re-sealing permissible, easy sealing surface identification, pierceable.Compatibility: Polypropylene (PP), Polystyrene (PS). Seal integrity range: -20C to…

SealPlate ColorTab adhesive films consist of 50 mum thickness clear polyester. They minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal for ELISA, EIA, and similar assays. These unique films include a color dot and white writing area on each end tab for…

AlumaSeal CS sealing films are a specially formulated aluminum foil with a 50 mum layer of acrylic adhesive that withstands cold storage at temperatures between: -80 C to +120 C . Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or…

AbsorbMax films are 200 mum thick black vinyl adhesive films for use with 96 well, 384 well, and 1536 well black microplates. The films may be applied to either the top or bottom of the plate. A split backing aids in applying the film properly. Edge cutouts assist in positioning and accommodate…