Sealing Film

Compare Tool

Select up to 3 products

HomeAll Products

Sealing Film

1 - 32 of 169
Sort
View
Show
  • Breathable film that allows effective gas exchange for cellular/bacterial cultivation while preventing contamination. 

  • Non-pierceable Peelable Seal integrity range: -40°C to 121°C Use Applications: qPCR and other fluorescent applications, plate readers, microscopy and protein crystallization (96 or 384 well)

  • MycoSeal™ Shrink Seals

    Hardy Diagnostics

    Cellulose shrink seals are recommended for sealing 15x100mm petri plates. It is a cellulose shrink seal designed to keep petri plate lids tightly sealed. Sealed plates retain their moisture and stay fresh longer. Ideal for mycology and TB cultures, MycoSeal™ prevents dehydration and cracking…

  • Ideal for cell, tissue and bacterial cultures Re-fillable & re-usable polypropylene applicator for quick and easy dispensing of film from a roll Seals three times faster that sheeted films Protects film from dust and contaminants Environmentally friendly; no paper backing to remove…

  • labForce™ Heat Seals for Microplates - Sheet Format

    labForce® (a Thomas Scientific Brand)

  • Axygen® EASY PRESS is a manual device which provides simple and effective application of Axymats and/or Impermamats to 24, 48, 96 or 384 well microplates, deep well plates, microtiter tube systems and PCR plates. The EASY PRESS can be quickly adjusted to handle any size plate of varying heights…

  • ClearASeal Weld qPCR Film

    IST Scientific

    Permanent seal Difficult to pierce Non-peelable Seal integrity range: -80°C to 110°C DMSO and solvent resistant Autoclavable (121°C)* Use Applications: suitable for PCR and qPCR, long term storage, and disposal of hazardous materials Seals polypropylene plates …

  • This transparent sealing tape consists of a 2.0 mil polyolefin film coated on one side with a pressure sensitive acrylate adhesive which does not interfere with cycle reactions. It is ideal for reducing well-to-well contamination and/or spill over in sensitive PCR applications where the…

  • Parafilm M® Dispenser

    United Scientific Supplies

    Durable acrylic dispenser is ideal for storing, dispensing and cutting Parafilm M® tape and labels. Holds two-inch or four-inch rolls and includes a sharp, serrated blade for easy cutting. Lid opens for quick loading of rolls. Parafilm M® not included.

  • Polyester Sealing Film

    Innovative Laboratory Products

    Polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates. This seal is ideally suited for short term storage,…

  • The QuickSeal Applicator System includes a re-usable applicator and two rolls of perforated film. Cost effective replacement rolls are sold separately. The applicator facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using…

  • ThermalSeal RTS(TM) sealing film is a 50 mum thick polyolefin with 50 mum inert encapsulated silicone adhesive. They are optically clear, with low autofluorescence, and are especially suited for real-time qPCR, storage, and protein crystallization applications. The encapsulated silicone adhesive is…

  • AEP's exclusive GraterEdge blade offers superior cutting performance with unmatched durability and safety. The result is the industry's most efficient producer delivering the right cling for the tightest seal.

  • Microplate Brayers

    Diversified Biotech

    1177Z78 Standard soft rubber brayer Creates uniform seal 1177Z79 Deluxe firm rubber brayer Even distribution of force Thumb pockets for better control Ergonomic handle

  • Labcon PurePlus® Polymerase Chain Reaction (PCR) consumables are made without additives so you don't need to wonder what is different about the plates, tubes, or strips you are using from one day to the next. Many of our plates are printed with black alpha numeric reference grids to make it…

  • Non-Toxic Plate Sealer

    MP Biomedicals

    Dimensions: 13.3 x 8.3 cm Storage & Handling: ROOM TEMPERATURE Detection/Incubation Time: FTIR Non-Toxic

  • With a 70µm top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multi-channel pipettors and robotic probes. Dimensions are 79.4mm x 142.9mm for 96-well plates Clear zones and end tabs…

  • Peelable Pierceable Seal integrity range: -20 °C to 40 °C Autoclavable (121 °C) Use Seals polypropylene, polystyrene, polyethylene and COC Suitable for cell culture and short-term incubations

  • ABS Parafilm® Dispenser

    Heathrow Scientific

    Unique design for maximum safety Store, dispense, and cut Parafilm®, tape, labels, and Tough-Tags®. ABS plastic dispenser designed with a safety razor that slides and cuts with no danger to fingers. Dispenser holds one or two 2-inch rolls, or one 4-inch roll.

  • Effectively seal all microplate formats For storage, PCR, microscopy, culture & protection Protective backing Pre-cut, plate-sized sheets

  • Breathe-EASIER Sealing Film

    Diversified Biotech

    Breathe-EASIER (a white non-woven rayon membrane) transmits water vapor 6 times faster than Breathe-EASY for accelerated growth. Membranes are ideal for cell growth, concentrating samples (e.g. freeze drying), and gas exchange. Easy microtube cap closure. Will not bind in centrifuge rotors. …

  • Sealing Mat Plus, Pierceable, Resealable, Solvent Resistant, -40°C to +120°C.  This dimple-free mat manufactured from 10 mil medical grade transparent Silicone with Adhesive-Free well coverage bonds firmly to the microplate, permits precise withdrawal and injection of liquid, and…

  • These films are made of inert polyestr with an acrylic adhesive. They are compatible with almost all microplate procedures and are also inert to most chemical reagents.

  • Transparent (Clear) and Peelable Heat Sealing Film for the Ultraseal Pro.  Optically clear, peelable heat sealing film suitable for qPCR and optical applications.  When heat is applied, the clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene,…

  • Ideal for short-term storage and robotics Minimizes evaporation, reduces cross-contamination and prevents spillage A multilayer film consisting of a top pierceable clear polyethylene film and a white polypropylene sublayer with 96 circular areas void of adhesive The white sublayer aids in…

  • ThermASeal Foil

    IST Scientific

    Peelable Seal integrity range: -200 °C to 110 °C High solvent resistance Autoclavable (121 °C) Use Recommended for PCR, including with water bath thermal cyclers Seals polypropylene plates Suitable for long term storage and transportation Suitable for very low…

  • 12” UTF Hand Roller

  • labForce™ Adhesive Seals for Microplates

    labForce® (a Thomas Scientific Brand)

  • labForce™ Heat Seals for Microplates - Roll Format

    labForce® (a Thomas Scientific Brand)

  • ClearASeal Perforated

    IST Scientific

    Seal integrity range: -80 °C to 110 °C 3 mm slits for gas transfer Use Seals polypropylene, polyethylene, polystyrene and cyclic olefin copolymer (COC) plates Suitable for insect and seed storage, short term incubation, and cell culture

  • Cell Culture Inserts

    Electron Microscopy Sciences

    Polycarbonate membranes Easy cultivation of most cell types without matrix coating Treated for cell culture Inserts with 0.02 µm membrane have maximum clarity for microscopy, and are non-auto-fluorescent and highly porous Polycarbonate membranes in larger pore sizes are adaptable to many…

  • SealPlate® film sterile

    MilliporeSigma

    Sheets pre-cut to fit standard multiwell plates. Both film and adhesive are inert and compatible with microplate procedures. Adhesive forms a tight, waterproof seal, preventing cross-contamination and evaporation. SealPlate film is 2 mil (0.05 mm) polyester, with a functional temperature range of…

Compare Tool

Select up to 3 products