Sampling bags are a low-cost, whole-air sampling device for high-level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…

Single-stage, stainless steel Two pressure gauges and CGA-180 fitting Stainless steel diaphragm and Kel-F seat Accurate pressure control even at low flow rates Individually tested for leaks and impurities

Sulfinert treatment eliminates active sites in the valve or loop for better recovery of active compounds. Ideal for samples containing low concentrations of sulfur or other active compounds Sample loop sizes from 5 µL to 5mL

Firm nylon bristle brushes for easy cell cleaning and removal of solid samples Range of sizes to fit all extraction cells for ASE 100, 200, and 300

Use a luer lock valve adaptor to connect a luer lock fitting to a Rheodyne or Valco valve.

Restek’s air canister tripod holds two canisters simultaneously for collocated ambient air sampling. The custom-designed bracket holds most 1, 3, and 6L canisters* securely without any tools. Lightweight (12 lb) and compact for easy storage and transport Extends from 6' to 9'…

1/16" fittings, 1mm ID, for "W Type" valves Ideal for samples containing low concentrations of sulfur or other active compounds Sample loop sizes from 5 µL to 5 mL Sulfinert treatment eliminates active sites in the valve or loop for better recovery of active compounds.

This cylinder stand is designed to support small-diameter cylinders, such as 104L and 110L disposable cylinders. It is a simple, safe, and economical way to stabilize the position of small cylinders, while keeping them within close proximity. The stand is constructed of heavyweight painted steel…

High-quality vacuum gauges with 316 stainless steel wetted surfaces. –30" Hg to 0" Hg. Recommended for use with passive sampling kits. All are rear mount.

Use the CGA-160 inlet connection with 14L Scott/Air Liquide transportable gases. Use the CGA-165 inlet connection with 48L Scott/Air Liquide transportable gases.

Luer lock inlet offers leak-tight syringe connection Variety of filter types, porosities, and diameters Color coded for easy identification Rugged polypropylene housing Autoclavable to 121°C for 15 minutes Quantity break pricing for greater savings Cellulose Acetate, Nylon,…

Cellulose or glass fiber construction Fit 11 mL, 22 mL, and 33 mL cells Cellulose filters available in economical 1,000-packs

Hydrophilic (polar) adsorbents used to extract hydrophilic analytes from nonpolar matrices, such as organic solvents (e.g., polar contaminants from sample extracts). All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. …

Glass fiber disks embedded with C18 or C8 bonded silica Extract semivolatile organic compounds Deep-pore design reduces clogging and allows faster flow rates Meet requirements for EPA Methods 525.1, 506, 550.1, and 549.1 Lower cost than PTFE disks

Accurately and precisely dispense liquids for QuEChERS extractions with this versatile pump. A quick, simple adjustment lets you set the output volume anywhere from 2.5 mL to 30 mL per stroke, and the included adaptors will accommodate most reagent bottles. Adjustment knob offers 56 output…

Free-flowing salts transfer easily and completely. Easy-open packets eliminate the need for a second empty tube for salt transfer. Convenient slim packets fit perfectly into tubes to prevent spills. Ready-to-use tubes, no glassware required. Pre-weighed, ultra-pure extraction salts. …

Proven long life—durable design is engineered to exceed 15,000 cycles Leak-free performance—every valve is helium leak-tested to 1x10 -6 mL/sec Effortless operation—easily finger-turn to achieve full valve closure (only 10 in-lb) Enhanced damage-resistance—W-type…

Resprep® vacuum manifolds for SPE sample preparation, filtration, and elution are available in 12- and 24-port configurations. These manifolds help in achieving consistent extraction and filtration results. Multiple sample processing with these manifolds simplifies procedures and saves time. The…

Anhydrous sodium sulfate is the most common drying agent used to remove moisture from sample extracts. We package our 10-60 mesh material in recloseable buckets. Ideal for removing water from sample extracts Activate by heating to 400°C for four hours before use Packaged in…

Inlets have 1/4" stainless steel compression fitting on each end One end connects to flow controller or canister; nut on other end serves as rain guard Includes nuts and ferrules Two different lengths for use with large canisters and miniature canisters

1174R53 : Long-term storage of blank/sampled tubes. 1174R54 : Long-term storage caps. 1174R55 : Use for tightening long-term storage caps. 1174R57 : Assists with tube packing. 1174R58 : Use for connecting tubes in series. 1174R59 : Required for diffusive sampling with stainless…

Accelerated solvent extraction is a common technique for fast and reliable extraction of organic materials from solid matrices, using EPA SW-846 Method 3545, Pressurized Fluid Extraction (PFE). Restek offers a wide range of replacement parts to keep your extraction system running smoothly. All…

High-quality thermal desorption tubes are suitable for ppt to ppm concentrations of volatile organic compounds (VOCs) in ambient, indoor, personal, and industrial hygiene environments. Fit Markes (ULTRA and UNITY), PerkinElmer, and Shimadzu thermal desorbers. Packed tubes come with a report…

Disposable 8-Hour Sampler Lines

Hydrophobic (nonpolar) silica-based adsorbents; used to extract hydrophobic analytes from polar matrices, such as water (e.g., pesticides from water). All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be…

Restek's passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.* The improved filter design greatly reduces the number of potential leak sites. The passive air sampling kit is available in seven sampling flow ranges and…

Diatomaceous earth is used as a filter aid to improve extraction efficiency of densely packed soils, such as clays. By mixing the sample with diatomaceous earth, recoveries can be improved and excess moisture can be absorbed. Packaged in a convenient 1 kg quantity. Improves extraction…

Styrene/divinylbenzene, equivalent to XAD-2 resin Untreated, packaged in 1 kg plastic containers Spherical, 20 to 60 mesh particles

High-quality thermal desorption tubes are suitable for ppt to ppm concentrations of volatile organic compounds (VOCs) in ambient, indoor, personal, and industrial hygiene environments. Fit Markes (ULTRA and UNITY), PerkinElmer, and Shimadzu thermal desorbers. Packed tubes come with a report…

Field duplicates of canister samples frequently result in analyte concentrations with high relative standard deviations. In addition, field duplicates do not differentiate laboratory performance from sampling variability. Restek’s dual canister sampling manifold (DCSM) minimizes sampling…

Meets original equipment manufacturer's performance Choose original equipment–equivalent stainless steel or Siltek deactivation for improved inertness and extended lifetime