Sample Preparation, Chromatography

Compare Tool

Select up to 3 products

HomeAll Products

Sample Preparation, Chromatography

1 - 32 of 135
Sort
View
Show
  • Q-sep QuEChERS dSPE Tubes for Extract Cleanup

    Restek

    QuEChERS methods are fast, easy, and cost-effective, and Restek Q-sep products make QuEChERS procedures even simpler. All extraction salts, sorbents, and sample tubes are included—no specialized equipment or glassware is required. Prepare samples more efficiently with a complete line of…

  • Ottawa Sand (Bulk Adsorbent)

    Restek

    Ottawa sand is listed in several U.S. EPA methods as the specified medium for matrix spike and laboratory control blanks. Sample medium for matrix spikes and laboratory control blanks Packaged in convenient 5 kg buckets

  • Vacuum Gauges

    Restek

    High-quality vacuum gauges with 316 stainless steel wetted surfaces. –30" Hg to 0" Hg. Recommended for use with passive sampling kits. All are rear mount.

  • Q-sep Bottle Top Solvent Dispenser

    Restek

    Accurately and precisely dispense liquids for QuEChERS extractions with this versatile pump. A quick, simple adjustment lets you set the output volume anywhere from 2.5 mL to 30 mL per stroke, and the included adaptors will accommodate most reagent bottles. Adjustment knob offers 56 output…

  • Syringe Filters with Luer Lock Inlet

    Restek

    Luer lock inlet offers leak-tight syringe connection Variety of filter types, porosities, and diameters Color coded for easy identification Rugged polypropylene housing Autoclavable to 121°C for 15 minutes Quantity break pricing for greater savings Cellulose Acetate, Nylon,…

  • Small Cylinder Stand

    Restek

    This cylinder stand is designed to support small-diameter cylinders, such as 104L and 110L disposable cylinders. It is a simple, safe, and economical way to stabilize the position of small cylinders, while keeping them within close proximity. The stand is constructed of heavyweight painted steel…

  • ACTI-VOC Low-Flow TD Sampling Pump

    Restek

    Robust, low-flow pump optimized for sampling volatile organic compounds (VOCs) onto thermal desorption (TD) sorbent tubes Small, lightweight, easy to use, and intrinsically safe—ideal for personal monitoring and a wide range of other air and gas sampling applications Compatible with any…

  • Ashcroft Test Gauges

    Restek

    High-accuracy test gauges are recommended for verifying the vacuum/pressure in canisters before and after sampling. The 6-inch face on the analog gauge allows for easy reading. The digital gauge operates on two AAA batteries and offers an unambiguous readout. Both gauges have an accuracy of +/–…

  • ALTEF Gas Sampling Bags

    Restek

    Sampling bags are a low-cost whole air sampling device for high level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…

  • Replacement Combination Vacuum/Pressure Gauges

    Restek

    2-inch vacuum/pressure gauges, 316 stainless steel with 1/8" NPT fitting and center back mount. Recommended for use with canisters.

  • Resprep-C18 and Resprep-C8 SPE Disks

    Restek

    Glass fiber disks embedded with C18 or C8 bonded silica Extract semivolatile organic compounds Deep-pore design reduces clogging and allows faster flow rates Meet requirements for EPA Methods 525.1, 506, 550.1, and 549.1 Lower cost than PTFE disks

  • Tedlar Sampling Bags

    Restek

    Sampling bags are a low-cost, whole-air sampling device for high-level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…

  • Ultra-High Pressure Sample Cylinders

    Restek

    Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…

  • Sample Cylinders, High Pressure

    Restek

    Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…

  • Easy-VOC Grab Sampler

    Restek

    Perfect for fast and simple grab sampling of small air volumes (50–500mL) directly into sorbent tubes* Easy, instant sample collection with no complicated pumps to calibrate or maintain Convenient to use anywhere, just attach a sorbent tube to the end of the handheld unit and draw a…

  • Q-sep QuEChERS Extraction Salts

    Restek

    Free-flowing salts transfer easily and completely. Easy-open packets eliminate the need for a second empty tube for salt transfer. Convenient slim packets fit perfectly into tubes to prevent spills. Ready-to-use tubes, no glassware required. Pre-weighed, ultra-pure extraction salts. …

  • Miniature Air Sampling Canisters

    Restek

    These small canisters are designed for controlled sampling, such as personal air sampling, as an alternative to tube and pump samplers. The 1,000 cc canister is suitable for sampling volatile organic compounds in air according to methods TO-14A, TO-15, IP-1A, ASTM 5466, OSHA PV 2120, and NJ DEP Low…

  • Replacement Septum for Gas Sampling Bags

    Restek

    Replacement Septum for Tedlar, ALTEF, and Multi-Layer Bag Valves, 4mm diameter, PTFE-faced silicone.

  • 60mL Sample Collection Vials for ASE 200 Systems

    Restek

    Cleaned, assembled, and ready to use Clear or amber glass Caps and PTFE-lined septa included

  • Diskcover-47 Reservoir

    Restek

    The Diskcover-47 open-top reservoir allows you to pour up to 125 mL of sample directly onto the filter disk holder. It easily installs on top of the Diskcover-47 extraction disk holder. *Must be used with the Diskcover-47 extraction disk holder.

  • Multi-Layer Foil Gas Sampling Bags

    Restek

    Sampling bags are a low-cost whole air sampling device for high level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…

  • Visiprep™ Large Volume Sampler for use with 3 or 6 mL SPE tubes (includes 4…

    MilliporeSigma

    General Description For continuous "hands off" direct transfer of multiple liquid samples A Visiprep large volume sampler enables you to transfer low viscosity samples directly from any sample container to conventional solid phase extraction tubes on a Visiprep SPE vacuum…

  • Method Specific SPE Cartridges

    Restek

    These cartridges have been specifically designed to provide consistent and reproducible results for the method or application stated. All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be processed by any one or…

  • TO-Can Air Sampling Canisters with RAVE Valve

    Restek

    Optimized for Methods TO-14A, TO-15, IP-1A, ASTM D5466, OSHA PV 2120, and NJ DEP Low Level TO-15 Proprietary electropolished surface maintains compound stability. High-quality, metal-to-metal seal, 2/3-turn valve with stainless steel diaphragms prevent sample adsorption for more-accurate…

  • Ultra-Clean Resin

    Restek

    Equivalent to XAD-2 Resin—Exclusively from Restek! Ultra-Clean resin typically eliminates the hassle of cleaning and testing resin for air sampling. For adsorbing semivolatiles in air. Cleaned and GC tested. Available in 100 gram quantities.

  • Grab Passive Air Sampling Kits

    Restek

    Use with 1, 3, or 6 L canisters for grab air sampling Variety of orifice sizes for fast sampling from 5 to 60 minutes Connect 1/4" compression fitting directly to canister valve inlet Replaceable frit protects orifice and valve from particulates Sample inlet design minimizes water…

  • Q-sep Tube Racks

    Restek

    Available for 2 mL, 15 mL, and 50 mL tubes Alphanumerical grid reference on top tier for easy identification of samples Easy to assemble; simply fold and snap together securely

  • SDVB Resin

    Restek

    Styrene/divinylbenzene, equivalent to XAD-2 resin Untreated, packaged in 1 kg plastic containers Spherical, 20 to 60 mesh particles

  • Model 1062 Vacuum Bag Sampler

    Restek

    The model 1062 vacuum bag sampler provides fast sampling with zero cross-contamination. A vacuum created in the box draws air into the sampling bag without drawing it through the vacuum pump first, as is the case with standard air sampling pumps, thereby preventing contamination of the sample. This…

  • TO-Can Air Sampling Canisters with Swagelok SS4H Bellows Valve

    Restek

    ?Proprietary electropolished surface that maintains compound stability. High quality, Bellows-design valve. Now also available with new RAVE valve. U.S. EPA Methods TO-14A and TO-15 regulate the collection, storage, and analysis of volatile organic compounds (VOCs) using treated air…

  • Resprep Sample Delivery System

    Restek

    Use the Resprep sample delivery system to transfer large volumes of low viscosity samples directly from a bottle to a solid phase extraction cartridge, or to a disk on a vacuum manifold system for extraction or cleanup. Each unit consists of six transfer lines with a stainless steel weight on one…

  • Resprep Resin SPE Disks

    Restek

    47 mm glass fiber disks embedded with styrene/DVB resin For chlorinated, benzidine-containing, or nitrogen-containing pesticides Meet requirements of EPA Methods 515.2 and 553

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.