Sample Preparation, Chromatography

Compare Tool

Select up to 3 products

HomeAll Products

Sample Preparation, Chromatography

1 - 32 of 135
Sort
View
Show
  • Humidification Chamber

    Restek

    When cleaning SilcoCan or TO-Can canisters, it is important to use humidified air or nitrogen to help remove volatile organic contaminants. Restek's humidification chamber is made of acrylic and withstands pressure up to 90 psi. The 1/4-inch inlet and outlet compression fittings allow easy…

  • 2 µm Frit Filters

    Restek

    For use in critical orifice fitting. Includes washers.

  • Resprep 12- or 24-Port SPE Manifolds

    Restek

    Use with any standard male luer end SPE cartridges Inert, PTFE sample guides reduce cross-contamination and carryover Flexible sample collection rack will accommodate a variety of receiving vessels Quick vacuum-release valve for better system control Individual valves allow vacuum…

  • Miniature Air Sampling Kits

    Restek

    Restek’s passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.* Kit includes flow controller, critical orifice, 2 µm frit filter, vacuum gauge, and sample inlet. The gauge and sample inlet are downsized for…

  • Resprep-C18 and Resprep-C8 SPE Disks

    Restek

    Glass fiber disks embedded with C18 or C8 bonded silica Extract semivolatile organic compounds Deep-pore design reduces clogging and allows faster flow rates Meet requirements for EPA Methods 525.1, 506, 550.1, and 549.1 Lower cost than PTFE disks

  • Vacuum Gauges

    Restek

    High-quality vacuum gauges with 316 stainless steel wetted surfaces. –30" Hg to 0" Hg. Recommended for use with passive sampling kits. All are rear mount.

  • Ashcroft Test Gauges

    Restek

    High-accuracy test gauges are recommended for verifying the vacuum/pressure in canisters before and after sampling. The 6-inch face on the analog gauge allows for easy reading. The digital gauge operates on two AAA batteries and offers an unambiguous readout. Both gauges have an accuracy of +/–…

  • Spectra Gas 7621 High-Purity VOC Regulators

    Restek

    Single-stage, stainless steel Two pressure gauges and CGA-180 fitting Stainless steel diaphragm and Kel-F seat Accurate pressure control even at low flow rates Individually tested for leaks and impurities

  • Q-sep QuEChERS Extraction Salts

    Restek

    Free-flowing salts transfer easily and completely. Easy-open packets eliminate the need for a second empty tube for salt transfer. Convenient slim packets fit perfectly into tubes to prevent spills. Ready-to-use tubes, no glassware required. Pre-weighed, ultra-pure extraction salts. …

  • TO-Can Air Sampling Canisters with RAVE Valve

    Restek

    Optimized for Methods TO-14A, TO-15, IP-1A, ASTM D5466, OSHA PV 2120, and NJ DEP Low Level TO-15 Proprietary electropolished surface maintains compound stability. High-quality, metal-to-metal seal, 2/3-turn valve with stainless steel diaphragms prevent sample adsorption for more-accurate…

  • Ultra-High Pressure Sample Cylinders

    Restek

    Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…

  • Quick-Connect Fittings for Miniature Air Sampling Canisters

    Restek

    Attach quick-connect body fitting to stem fitting to open canister. Attach quick-connect stem protector to stem fitting when not sampling to prevent canister from accidentally opening. Connection: 1/4" tube fitting. Note: Quick-connect body fitting (cat.# 24187) must be ordered separately…

  • Sample Cylinders, High Pressure

    Restek

    Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…

  • Thermal Desorption (TD) Tubes

    Restek

    High-quality thermal desorption tubes are suitable for ppt to ppm concentrations of volatile organic compounds (VOCs) in ambient, indoor, personal, and industrial hygiene environments. Fit Markes (ULTRA and UNITY), PerkinElmer, and Shimadzu thermal desorbers. Packed tubes come with a report…

  • SDVB Resin

    Restek

    Styrene/divinylbenzene, equivalent to XAD-2 resin Untreated, packaged in 1 kg plastic containers Spherical, 20 to 60 mesh particles

  • Cell Cleaning Brushes for ASE 100/200/300 Cells

    Restek

    Firm nylon bristle brushes for easy cell cleaning and removal of solid samples Range of sizes to fit all extraction cells for ASE 100, 200, and 300

  • Alicat M-Series Flow Calibrators

    Restek

    Quickly and precisely verify flow rates generated by vacuum or pressure before going into the field. These compact, convenient units are ideal for real-time calibration of air flow controllers, passive sampling kits, air canisters, sampling pumps, and more. They measure absolute pressure, mass…

  • Ultra-Clean Resin

    Restek

    Equivalent to XAD-2 Resin—Exclusively from Restek! Ultra-Clean resin typically eliminates the hassle of cleaning and testing resin for air sampling. For adsorbing semivolatiles in air. Cleaned and GC tested. Available in 100 gram quantities.

  • Integrated Passive Air Sampling Kits

    Restek

    Restek's passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.* The improved filter design greatly reduces the number of potential leak sites. The passive air sampling kit is available in seven sampling flow ranges and…

  • Cell Organizer for ASE Parts

    Restek

    Convenient storage of extraction cell parts and consumables Thirteen open bins provide easy visibility and organization for small and large pieces Small footprint conserves valuable lab bench and drawer space

  • 7 µm In-Line Filters

    Restek

    This 316 stainless steel filter is designed to collect particles larger than 7 microns. We offer Siltek-treated and stainless steel versions (1/4" compression fitting on both ends). Note: frit is not replaceable.

  • 30mm Filters for ASE 100/300 Extraction Cells

    Restek

    Cellulose or glass fiber construction

  • TO-Clean Canister Cleaning System

    Restek

    High capacity, fully automated, easy-to-use canister cleaning oven dramatically increases lab efficiency. TO-Clean from Restek is a revolutionary canister cleaning system designed to take the guesswork out of canister cleaning. The system is fully automated, allowing the user to start a cleaning…

  • Air Canister Tripod

    Restek

    Restek’s air canister tripod holds two canisters simultaneously for collocated ambient air sampling. The custom-designed bracket holds most 1, 3, and 6L canisters* securely without any tools. Lightweight (12 lb) and compact for easy storage and transport Extends from 6' to 9'…

  • Celite 503

    MilliporeSigma

    CAS No.: 68855-54-9 pH: 10 (100 g/l, H2O, 20°C) Solubility: Bulk Density: 300 kg/m3

  • Replacement Parts for Resprep SPE Manifolds

    Restek

  • Oil-Free Vacuum/Pressure Station for 12-Port Resprep SPE Systems

    Restek

    Allows switching from pressure to vacuum in a matter of seconds. Quiet, oil-free unit will not contaminate the extraction system or your samples. Provides 20" Hg (68 kPa) vacuum or 18 psi (124 kPa) pressure. Not recommended for use with 24-port manifold. Warranty period is one year from…

  • Resprep SPE Flow Filters

    Restek

    Designed specifically to improve flow when filtering oil and grease samples Use with Resprep Diskcover-47 reservoir, or any 47 mm glass sample reservoir

  • Replacement RAVE Diaphragm Valves

    Restek

    Proven long life—durable design is engineered to exceed 15,000 cycles Leak-free performance—every valve is helium leak-tested to 1x10 -6 mL/sec Effortless operation—easily finger-turn to achieve full valve closure (only 10 in-lb) Enhanced damage-resistance—W-type…

  • Empty Thermal Desorption Tubes

    Restek

    High-quality thermal desorption tubes are suitable for ppt to ppm concentrations of volatile organic compounds (VOCs) in ambient, indoor, personal, and industrial hygiene environments. Fit Markes (ULTRA and UNITY), PerkinElmer, and Shimadzu thermal desorbers. Packed tubes come with a report…

  • Small Cylinder Stand

    Restek

    This cylinder stand is designed to support small-diameter cylinders, such as 104L and 110L disposable cylinders. It is a simple, safe, and economical way to stabilize the position of small cylinders, while keeping them within close proximity. The stand is constructed of heavyweight painted steel…

  • Dual Canister Sampling Manifold

    Restek

    Field duplicates of canister samples frequently result in analyte concentrations with high relative standard deviations. In addition, field duplicates do not differentiate laboratory performance from sampling variability. Restek’s dual canister sampling manifold (DCSM) minimizes sampling…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.