Synonyms: Dihydrogen oxide , Ice Water for CO2 Incubators is double distilled, 0.1um filter sterilized, has a pH of 7-9 with a conductivity of 1-20 microSiemens (Resistivity of 50K-1 M ohm) and is terminal sterilized. The water is free of all contaminants and exceeds the specifications set by…

for microbiology Synonym(s): Wallerstein Laboratory Nutrient Agar

Synonyms: Halite , Rock salt , Saline , Salt , Sea salt Ultrapure sterile NaCl, saline solution is commonly used in a wide variety of molecular and cellular biology applications. Recipe 9g NaCl 0.20 μM sterile filtered Shelf Life: 3 Years (from Date of Manufacture) Formula: NaCl MW:…

IBI Cell Culture Grade, Pyrogen/Endotoxin Free Water is prepared for nuclear transfer, transfection, transformation, cell and tissue culture, LAL testing, and all other aqueous solution preparations that require stringent quality control. IBI Cell Culture Grade Water is tested for use in…

for microbiology Synonym(s): WLD Agar; Wallerstein Differential Agar

Formula: H₂O CAS Number: 7732-18-5 Water system validated under cGMP ISO 9001:2008 compliant FDA Class I Medical Device registered Tested to latest USP/ EP requirements Low microbial/ Non-sterile Pharmaceutical testing labs

Ready to use, sterile 1X Phosphate-Buffered Saline solution prepared with 18.2 megOhm water, 0.2 micron sterile filtered and steam sterilized in final packaging. Balanced salt solution used in many biomolecular applications. Ultra pure quality makes buffer ideal for use in a variety of cell…

Optimally prepared for adherent/suspension cell culture applications such as media and buffer preparation, water systems, incubators and for the preparation of reagents for chemical analysis or synthesis. Our cell culture water eliminates endotoxin concerns as it has no detectable Endotoxins (below…

Storage: −196°C

IBI Molecular Biology Grade, Nuclease-Free Water is ideal for all applications in a molecular biology lab including PCR, RT-PCR, restriction enzyme assays, modifying enzyme assays, transfection, cloning, transformation and all general molecular biology lab procedures. IBI Molecular Biology…

Formula: H₂O Formula Weight: 18.02 CAS No.: 7732-18-5 Density: 1.000 g/mL at 3.98 °C(lit.)  

IBI RT-PCR Certified and Nuclease-Free Water is ideal for all applications in a molecular biology lab including PCR, RT-PCR, restriction enzyme assays, modifying enzyme assays, transfection, cloning, transformation, and all general molecular biology lab procedures. IBI water is manufactured…

Powder Pack Reagents are pre-measured, unit dose reagents that have been formulated for use in Lovibond's Aqua Comparator Test Kits, the SC450 Single Parameter Colorimeter Series, MC500 Multi-Parameter Colorimeter, and the SP600 Spectophotometer. These easy-to-use chemistries offer an extended…

Purity: (Karl Fischer) Melting Point: -34 C (xylene) Density: 0.86 g/mL at 20 C Legal Information: AQUASTAR is a registered trademark of Merck KGaA, Darmstadt, Germany

Synonyms: Dihydrogen oxide , Ice Sterile PCR grade nuclease free water. Prepared with 18.2 megOhm, 0.1 micron sterile filtered water and autoclaved. Formula: H2O MW: 18,02 g/mol Boiling Pt: 100 °C (1013 hPa) Melting Pt: 0 °C Density: 1 g/cm³ (4 °C) Storage Temperature:…

Synonyms: Aqua-Destillata Expiration date: Exp 12 months from mfg date Filtered through 0.2 µm filter: To pass test Fluorescence as quinine at 254 nm: 1ppb max Fluorescence as quinine at 365 nm: 1ppb max Gradient at 210 nm: 0.002AU max Gradient at 254…

Sterile DNase Free RNase Free Protease Free Endotoxin Free DEPC Free Suitable for a wide range of applications such as PCR, Electrophoresis, DNA Sequencing, plus more. Reduce risk of contamination during enzymatic reactions and use RICCA High Purity Water for Molecular Biology.

Molecular Formula: H218O Molecular Weight: 20.02 Linear Structural Formula: H218O MDL Number: MFCD00064503 Melting Point: 0 C (lit.) Density: 1.11 g/mL at 20 C (lit.) Application: Appropriate for PET applications.

Synonyms: Hematology Stain Melting Point: 19.85 C Density: 0.82 g/cm3 Application: Prepared from dyes certified by the Biological Stain Commission (BSC)For In-Vitro Diagnostic Use.For Professional Use.Polychromic stain for peripheral blood and bone marrow smears. Used for red blood…

Storage: room temp Application: Use in place of normal or distilled water for water bath when cutting paraffin sections and pick up wrinkle free ribbons and sections on the slide. Changes the water surface tension so tissue spreads evenly without wrinkles when using paraffin that is of lower…

Synonym(s): 3-[4-(2-Methoxyphenyl)piperazin-1-yl]-2-phenyl-N-tert-butyl-propanamide dihydrochloride;; N-tert-Butyl-3-(4-(2-methoxyphenyl)-piperazin-1-yl) -2-phenylpropanamide dihydrochloride Empirical Formula: C₂₄H₃₃N₃O₂ -+ 2HCl Linear Formula: …

Squeeze the handle and a perfect dose of DPD reagent (Free or Total, 10 ml size) is dispensed directly into the test sample. Our DPD reagents are a direct replacement for Hach® reagents, so users can get the same results but at a more economical price. Already using the Hach® SwiftTest™? …

Storage: 2-8C Legal Information: IRMM is a registered trademark of European Commission Other Notes: Certified for the analytes listed below. See certificate for values and more detailsOrganic Pollutants: Linear perfluorooctane sulfonate (L-PFOS), Perfluorobutane sulfonate (PFBS),…

< 50 ppb TOC

Synonym(s): 2-Ethyl-5-phenylisoxazolium-3'-sulfonate; NEPIS Empirical Formula: C₁₁H₁₁NO₄S Linear Formula: C₁₁H₁₁NO₄S Formula Weight: 253.27 MDL Number: MFCD00012128 Purity: 95% Melting Point: 220 °C…

certified by the Biological Stain Commission Synonym(s): Eosin Methylene blue according to Wright MDL Number: MFCD00082143

MDL Number: MFCD00132767 Purity: ~17% aromatics basis Boiling Point: 150-200 °C Density: 0.78 g/mL at 20 °C Refractive Index: n 20/D 1.437

Sterile Water for Injection, Preservative Free USP Application: Diluent Single Dose Fliptop Vial Non-DEHP Preservative Free Latex Free: Latex Information: Natural rubber latex has not been used in the manufacture of this device or drug container closure system

The Ricca Chemical HPLC grade water is suitable for use in ultraviolet absorption detector and for liquid chromatography. It can be stored at a temperature of 15 to 30 degree C. Application: Suitable For Liquid Chromatography

Attaching the water purification system to the wall is now feasible with our wall mounting bracket. This easy-to-install water purification accessory for Milli-Q® systems guarantees to save precious lab bench space. The wall mounting bracket supports Milli-Q®…

Storage condition: Room Temperature Package Type: Glass Bottle C.A.S. Number 1: 7732-18-5 C.A.S. Number 2: 64-18-6 Material category: Solvents Material Group 1: LabReady Blends Material Group 2: LC-MS Solvent Blends Molecular weight: 18.02 Molecular formula: H2O