Complete, one-piece, jacketed flask with bottom outlet, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm…

Solid phase peptide synthesis vessel having a medium porosity, fritted glass resin support. Top of the vessel has a GL thread and is supplied complete with a PTFE lined PBT screw cap. Lower stopcock is a "T";-Bore 2mm PTFE to allow nitrogen to be used to upwardly agitate the resin beads…

The Chemglass high flow manifold system allows for easy and safe connection of your circulator to our glass process reactors. Manifold helps alleviate excessive mechanical forces placed on the glass vessel inlet/outlet. System is supplied complete as illustrated with Triple Insulated Flexible Hose.…

Similar to AF-0522, but cylindrical in shape. The 25 and 50mL sizes have a 0-4mm Chem-Vac™ Chem-Cap® valve while the 100 and 350mL sizes have a 0-8mm valve size. PLEASE NOTE: STIR BARS LARGER IN DIAMETER THAN THE OPENING OF THE VALVE, OR STANDARD TAPER JOINT, CAN BE SEALED INTO VESSELS…

Three neck reaction vessel lid to fit CG-1930 through CG-1931 vessels. Side necks are on a 30° angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

Complete reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED USING THE CG-2077-H STIRRER BEARING. IF YOU…

Unique glass baffle system for process reactors from 2L to 50L. Designed to increase agitation in the reactor and mimic baffles found in larger glass lined reactors. All baffles have 3/4" precision ground top and lower tubing for use with compression fittings and top jointed adapter.  …

Reaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 3/4"; female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10; X 10° compound…

Unique baffle system for benchtop process reactors from 300mL to 5L. Designed to increase agitation in the reactor and mimic baffles found in larger glass lined reactors. PTFE jacketed stainless steel provides excellent strength and chemical durability. Features: Adjustable Rectangular…

Aluminum transition adapter from beaded pipe on the inlet/outlet of the reactor to NPT. Used to connect fluid transfer hose to the vessel. Adapters require the beaded pipe couplings for connection to the vessel. Two are required per reactor.

Jacketed large scale process reaction vessels. The 10, 15, and 20L vessels have a 200mm ID flange with an o-ring groove formed in the surface of the flange. The 30, 50, 75, and 100L have a 300mm ID flat ground flange. The inlet/outlet of the vessels are beaded pipe fittings for use with the CG-1964…

Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Four side necks are vertical and one neck has a 10°; degree angle. Angled side neck is designed for use with CG-1235 angled distillation adapters. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

PTFE six blade turbine style agitator for use with reactor stirrer shafts. Shaft opening is drilled straight through to permit positioning at any height on the shaft.

Four neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

Our OS1025 STEM Omni Reaction Station enables you to run up to 10 reactions simultaneously at the same controlled temperature and stirring rate. The modular design of the OS1025 Omni Reaction Station means that the same base unit (OSCA) can accommodate a variety of cartridges and sample volumes…

Large scale sublimation apparatus constructed of heavy wall glass. Will sublime 100gms of solid sample. Cold finger tube positions in center neck and is held by a plastic bushing to a threaded condenser flask. All joints are PTFE-Clad to eliminate the use of grease and still avoid freezing. Kettle…

Ai R-series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a…

Our OS6000 series STEM Omni Reaction Stations enable you to run up to 6 reactions simultaneously at the same controlled temperature and stirring rate. The modular design of the OS6000 series Omni Reaction Stations means that the same base unit (OSCA) can accommodate a variety of cartridges and…

Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

Reaction vessel lid is constructed of 1/4"; thick #316 S.S. with a 1/8"; thick PTFE gasket underneath. The only materials exposed to the reaction are PTFE and Viton®;. Lid has seven openings that accept 45/50 outer PTFE inserts. Inserts are secured to the lid using glass filled PTFE…

Rugged, heavy wall head for use with 6384, 6386, 6388, 6423, 6425, 6427, or 6429 reaction flasks. Duran flange supplied with a shallow O-Ring groove for use with mating grooved flask. #15 Ace-Thred center and various #15 and #7 side necks available allow connections under pressure conditions…

The RS 9000 Heater/Shaker Reaction Station can be used within a robotic workstation or as a stand-alone apparatus within the lab. On a robotic platform, heating and shaking cycles can be controlled by external software or as part of a fully automated system, through the RS232/ RS485/ GSIOC ports;…

Five neck reaction vessel lid for 150mm flanged vessels. Lid has a 29/42 outer CN, (2) 34/45 outer SN & (1) Vertical 45/50 outer SN and (1) 45/50 outer SN angled 20°; for powder addition.

Cylindrical shaped tube useful for storage or simple reactions with a standard taper inner joint at the top and a Chem-Vac™ Chem-Cap® valve sidearm. Plug may be removed for sampling from tube while a purge of inert gas is maintained through the sidearm. Valve size is as listed.

ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…

Our jacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…

5-Neck reaction vessel lid for 200mm flanged vessels. Lid has a CN 45/50, 3-SN 45/50, and 1-SN 60mm Duran o-ring flange angled for powder addition. PLEASE NOTE: 60MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY.

ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…

Reaction vessel lid is constructed entirely of PTFE. Low-form lid has eight openings: (A) center neck 1"; female NPT for PTFE standard taper adapter, (B) side necks 1-1/2"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10°; X 10°…

Distillation receiver carts for use with our 10L thru 100L reactor systems. Heavy Duty support cart can be used for round bottom flasks or cylindrical distillation receivers. Rear of cart incorporates 1/2” stainless steel lattice for mounting support clamps or accessories. Glassware can be…

Features: Tool-Free™ Jacket Connection Design Allows Hose to be Attached or Removed by Hand Without Using Tools Chemically Resistant Perfluoro O-Rings on All CG-911-A and CG-511 Drain Valves Graduation Scale on Both Sides Showing the Approximate Volume Sidearm on Lower Drain…

Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.